Photoshop :: Close Path Quickly Without Clicking On Start Point
Oct 12, 2013if there is any way to close path quickly without clicking on the start point? With Polygonal Lasso we can do double click for this case but with paths?...
View 1 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Quickly Add Points At The Insertion Point Of A Block?
Nov 8, 2012how I can quickly add points at the insertion point of a block? I have over 1400 and would like to find the quickest way to do it.
View 7 Replies View RelatedAutoCad :: Select Line Start / End Point That Is Known Distance From OSnap Point?
Jun 9, 2011I'm trying to draw a plan of my house in Autocad 2009 but I seem to be endlessly using trim and extend because I can't easily select the points that I want with osnap. Eg. imagine I have a box, and I want to start drawing another box inside it that has each side as 10 units smaller than the corresponding side on the outer box.
Step 1 - I draw a small line from the top left corner of the big box using the endpoint snap, typing in "5" for the length.
Step 2 - I then do the same at right angles to the first line to get me to the starting point of the inner box. This always leaves me with 2 small lines to remember to delete.
Step 3 - Then in order to draw the top line of the inner box I end up drawing to a random length because I can't say "draw until 5 units away from the right hand side of the big box", then I end up trimming it later once I've repeated steps 1,2 and 3 for the next side of the inner box.
I know in my example above I could have scaled the box down or something but that's not what I'm getting at. I really want a way of selecting line start and end points that are a known position away from an existing point.
Photoshop :: CS6 Pen Tool - Clicking And Dragging On Existing Path Should Not Change
May 2, 2012CS6 Pen tool, clicking and dragging on an existing path should not change the angle on the adjacent radius handles. It should only dynamically adjust the length of the existing radius handles, based on which direction you drag. It should only affect that one segment and not affect the bordering angles. I've been pathing with Adobe products for 25 years and this should not change now. I want to be able to fine tune ONE line segment without affecting its neighboring segments. The "new" behavior should only occur with a modifier. If the Mothership deems this is the only way to do this moving forward, at LEAST give your long-standing customers a modifier, such as the shift key to enable us to keep working as we have been for decades.
View 6 Replies View RelatedAutoCAD LT :: How To Log In A File - Start And Close Event
Aug 3, 2012How can I log in a file the start and close event of Autocad?
View 1 Replies View RelatedLightroom :: Adjustment Brush Draw A Straight Line By Clicking The Start And Stop Points?
Mar 11, 2012Can a Lightroom adjustment brush draw a straight line by clicking the start and stop points?
View 8 Replies View RelatedIllustrator :: Clicking Inactive Anchor Point With Pen Tool Severs Its Handle
Jan 23, 2014I have read several Pen tool tutorials but haven't found anything about this:
If I draw a path with the pen tool and later want to reactivate it, clicking the last anchro point to make the path active severs one of its control handles. Specifically the handle that is for the curve that is yet to be drawn. And after that I have to use the Convert Anchor Point tool to recreate both control handles and try to math the already existing one to its former place.
How can I fix this?
CorelDRAW Graphics Suite X6 :: How To Close A Path
Mar 31, 2013how do you close a path in x6? i select the two duped lines then go to arrange but no close path option. i did it in x4.
View 2 Replies View RelatedGIMP :: How To Close Selected Area Using Path Tool
Apr 17, 2013How to close the selected area using the Path Tool? I expected, after clicking in the initial node the area would appear as selected, but no..
2.4.8
CorelDRAW Graphics Suite X5 :: Close Path With Straight / Curvy Lines
Apr 23, 2010In X4 there was the option under the Arrange menu to Close Path with several different options like this.
In Corel X5 this option is absent. Is there something equivalent?
Photoshop :: Does Feathering Start From Point Of Selection Outward To Designated Number Of Pixels
Jul 26, 2011When I use the feather function in Ps, does the feathering start from the point of my selection (marching ants) outward to the designated number of pixels, or from the marching ants inward, or half and half, or what?
View 3 Replies View RelatedAutoCAD .NET :: How To Set Polyline Start Point
Aug 12, 2012I tried to set Polyline.StartPoint to new position (Point3d):
Polyline.StartPoint = myNewPoint3d;
I have "not implemented" exception.
Also, I tried to do it as:
var seg0 = acEnt.GetLineSegmentAt(0);
seg0.Set(newPoint3d(0, 0, 0), seg0.EndPoint);
It doesn't work also. I can do it as:
acEnt.SetPointAt(0, my2dPoint);
But it's 2D point, not 3d
Of course I can remove polyline and create it again, but. How to set start point correctly for 3d point?
AutoCad 2D :: Start Point Selection?
Apr 1, 2011I draw a pline. It asks me for the start point. I type in INT. I used to get this 'x' when I was near the intersection. That is now gone. It will still go to the intersection, but I really want my 'x' back.
View 9 Replies View Related3ds Max :: Can't Adjust Start Point In Curve Editor
Oct 3, 2013I have a long animation. I want to use populate at frame 12000. But populate frames won't let me go over 10000 frames. How can I get my people to animate after frame 10000 as you cant adjust the start point in the curve editor.
View 7 Replies View RelatedAutoCAD .NET :: Create Arc With Start / End Point And Radius
Feb 7, 2013[Managed ObjectARX 2007 with C#]
I am trying to create an arc with start point, end point, and radius. So that if the arc gets drawn, I going to use the center point.
Well, I guess I can use "SendStringToExecute()" or "SendCommand()" and "ObjectAppended" event handler to get the arc object.
AutoCAD Map 3D :: Adding Different Styles At Start And End Point Of Lines
Nov 15, 2011I want to add say a circle and an arrow at the two ends of a line. I am able to do it using Blocks for one single line by inserting the blocks at desired locations. But how to do it for say all the lines in a drawing or shape file without customization.
View 1 Replies View RelatedAutoCAD Civil 3D :: Change Alignment Start Point
Feb 22, 2012C3D 2010..I have a alignemnt that I need to move the starting point 120' east of where it is now.
I've treid a slew of thing to no avail. Can this be easily done?I already have existing profiles for the current alignment.
AutoCAD .NET :: How To Find The Start / End Point Of Polyline With Program
Jun 6, 2013I draw 3 lines to form an open polyline. They are still in lines, not converted into a polyline.
How do I find the start or end point of the polyline with program? I am thinking to check all points which is not shared by two lines.
AutoCAD Inventor :: Retrieve Start Point On New Sketch
Apr 24, 2012how do I retrieve the centre point in my design axis in Inventor, when I create a new sketch, like the point at x0:y0:z0
View 2 Replies View RelatedAutoCad :: Arc (start-2nd-end Point) Absolute Or Relative Coordinates?
Sep 5, 2011I have a problem with absolute and relative coordinate regarding drawing an arc.
From my previous studies, I thought whenever I input coordinates in command line, in order to use absolute coordinates I just enter them. If I want to use relative coord, then I can prefix them with @ sign.
For an arc I input as follows: start point: 0,0 2nd point: 500,500 end point: 1000,0. I was expecting to get a half circle from origin to 1000,0 point but to my surprise I find out that CAD gets the input coordinates as relative.
Am I missing something? 1.dwg1.jpg Is this behavior same for all other object drawings?
AutoCad :: How To Draw Hundreds Of Lines That Have Same Start Point
Oct 26, 2013I have to draw hundreds of lines that have same start point. How can i do this?
I am trying to insert a picture but seem impossible for me. Sow i have lines with the same start point and different endpoints. There is a short way to do this. so avoid to enter the same start point for hundreds times or snap the the same point infinitely... what about Copy with grips or Change command in this case?
Paint.NET :: Drawing Line Using Start Point And Angle
Oct 19, 2012When I draw a line, is there a way to say, "Start at point (864,0), go exactly 270° down (actually, I can hold down the shift key for that, but I digress...) and end at the other side of the canvas at point (864, 3456)?
A script would probably work well, but I've never dipped into that.
Illustrator :: How To Start Drawing With Pen Tool From Different Anchor Point
Dec 15, 2013It's as simple as that. How do I change the anchor point from which I'm drawing. I'm using the pen tool on Illustrator CS6 on a tablet.
View 4 Replies View RelatedIllustrator :: How To Change Start And Stop Point Of Cutline
May 10, 2013I have been having an issue with items that have cutlines with rounded corners. The cut starts and stops in the corner (usually the upper left hand corner). In my industry we use cutlines for cutting shapes out of wood, acrylic, sintra, mdf, etc. and the corner stop and starts often times creates a problem: mis-shapen corner cut, mostly. I figure that I should be able to change the start and stop point is a spot on the straight part of the cut,
View 3 Replies View RelatedPhotoshop :: Add Corner Point To Path
Sep 14, 2012Is there a way to add a Corner Anchor Point to an exisiting path. The Add Anchor Point tool always creates a smooth point, which I then have to go back and convert to a corner point. Seems to me, in earlier versions, I was able to use the Pen tool, then hold ALT and click twice to achieve this. CS6 doesn't respond to that procedure. Is there some other trick?
View 1 Replies View RelatedCorelDRAW Graphics Suite X3 :: Start And End Point For Drawing Paths?
Apr 3, 2012Is there a way to see or determine the start and end point of a drawing path? I'm exporting a CorelDraw file as a .plt file to a plotter/cutter and the manufacturer of the plotter/cutter saws the start point of the cut is determined in CorelDraw.
I want to be able regulate where the cutter starts cutting the material and where it stops at the end of the cut path.
AutoCAD 2013 :: How To Set User Coordinate To Always Start In Last Snap Point
Jan 9, 2014Before when I was creating models the origin (0,0,0) was always set in the snap point i started the line in. Now suddenly something happend and now 0,0,0 is always starting in the Original XYZ point.
How do I get back to the old settings?
Photoshop :: One Point Circle Path With Pen Tool?
Nov 26, 2012drawing a circle path with one point and dragging or something like this.
View 2 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: How To Find Start And End Point Of AEC WALL
Jan 29, 2003Using Lisp or VLisp, how can I find the Start & End Point of an AEC_WALL ent. ?
View 5 Replies View RelatedAutoCAD Inventor :: Export Start And End Point Of Various Lines In Sketch To Excel File?
Oct 26, 2012I have been searching for a macro to export the start and end point of a line coordinates to excel, but I can only find information on how to export 3D Points.
Is it possible to program a macro that allows me to export the start and end point of various lines in a sketch?
The objective of this is to connect an excel file which is updated when I create a line with it correspondent points, then i could not only import these x,y,z coordinates from excel to inventor but I whould be able to update my spreedsheet whenever I change my sketch.
Illustrator :: How To Round Anchor Point On The End Of A Path
Dec 17, 2013I have made a curved path in Illustrator CS6, just a simple stroke (left in picture). Is there an easy way to round the corner of the end of it? Something like the image on the right? (I just tossed a circle over top to give an idea)
View 3 Replies View Related