Is there a way to add a Corner Anchor Point to an exisiting path. The Add Anchor Point tool always creates a smooth point, which I then have to go back and convert to a corner point. Seems to me, in earlier versions, I was able to use the Pen tool, then hold ALT and click twice to achieve this. CS6 doesn't respond to that procedure. Is there some other trick?
View 1 RepliesI have a banner heading that is more or less outlined text. I want to give all the corners a rounded corner and at the moment would just do it all by hand, one at a time. So I want to go from a to b:
But I would like to find an easy way to make all corners the same diameter regardless of the angle too.
Add one rounded corner effect to a point of a segment or a shape as in indesign
View 6 Replies View Relatedi have a building corner point label style that labels the corner of bldgs with the elev on top of an arrow and the full description of a bdlgc on bottom of arrow...rotated at 45 degrees....
i have 3 components...a block of an autocad leader i call an arrow that i just drew from left to rt on layer 0 and named the component arrow...then i have the elevation and the description
problem is that when i rotate label to move it out of way of obstructions it flips the elev on bottom and the desc on top!!
i have tried a number of combinations of anchor pts and changing the "flip anchor pts with text" to true/false under the general tab of the label style composer...
i cant get it!
I need the x, y origin point to be in the lower left corner. In the past I was able to go into the Adobe Illustrator setting and change some code so when I double clicked in the left corner of the ruler it would switch my origin to lower left. Now there is nothing in the setting folder because this program is on the cloud.
View 2 Replies View Relateddrawing a circle path with one point and dragging or something like this.
View 2 Replies View Relatedif there is any way to close path quickly without clicking on the start point? With Polygonal Lasso we can do double click for this case but with paths?...
View 1 Replies View RelatedI draw square. The 1st point and last points are left-top and finally set 5 points.The direction is clock-wise and made closed path.To get smooth-curved polygon shape, I used API 'PointsToCurves'.But, the first and last points are connected by cornered (not smooth) point. Here's result.
Maybe, I must set that square is closed path, to API, but it seems to be no parameter to set.So, I want to know how to get smooth corner shape every corner.I use SDK CS5.
I have made a curved path in Illustrator CS6, just a simple stroke (left in picture). Is there an easy way to round the corner of the end of it? Something like the image on the right? (I just tossed a circle over top to give an idea)
View 3 Replies View RelatedIs there a way to see how many points are in a selected path?
View 2 Replies View RelatedIs there any way to find a specific point on a path, that is not necessarily an anchor point?
What I'd like to be able to do is tell Illustrator "Give me the coordinates of the point that's exactly at half of this path's length" or "... exactly 25% ...". And if that's possible, can I somehow add an anchor point to that point, or cut the path at that point?
Path array of a point on spline, I’m wondering why the path array of a particular point on the spline doesn’t force the points to lie on the spline itself!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I have imported a path of GPS points and have them mapped in autocad where I want them, what I now need to do is place a symbol (a circle with an M in the middle of it) over each dot. I have the symbol as a separate layer but know no easy way to add this symbol to each dot so that the dot is in the centre of the circle. I can simply copy and paste the symbol and drag manually to each dot but this will take forever as there is over a thousand dots and accuracy of the dot being centered would not be spot on.
View 5 Replies View RelatedI have written code for the user to select a point on the curve.I need to trace the point along the curve at certain intervals.How do i calculate the direction in which the point moves along the path.Im not using the GetPointOnCurve asit doesnt suit my requirement.
View 9 Replies View RelatedI'm wondering how it's possible to drag only one handle out of an anchor point. Sometimes I have a path and some anchor points have only one handle dragged out. Now I want to adjust the other handle _without_ changing the already positioned handle. Is this even possible?
The "convert anchor point tool" does allow me to drag out handles, but only both at a time. This always results in changing the already positioned handle's position.
Is it possible to find intersection poit of the anchor point and any point on path?
Like on a picture, there are an anchor poit from a line, which intersects arc path, and I need to find intersection poit on the arc (can be line) path. Thus I can do further processing for arc after intersection - change position, set color etc.
I suppose I need to divide that arc path and that will be the best way, but all I need for this moment extract point before intersection and after and process in our custom preview. Is there way to find this intersection?
I have had this problem since I started using patterns. Basically when I put a pattern on a path I want to then move it along that path so it starts where I want it to start, not neccessarily on the path's starting point.
There is an image of how it looks like
I created a simple pattern to show my issue. For example I want to move this pattern along this circle so it looks like this (triangle points up)
As you can see I rotated the whole circle to get the right outcome I need, but if it was just a regular path I would not be able to fix it this way.
Is there a way to do that? Something like moving text along a path.
I am using Illustrator CC.
I am developing a plugin for Illustrator CS5, 6. I have a scenario which requires the plugin to place a text frame inside a closed path art. How can I calculate the proper destination coordinates? The path art can be a curve or a rectangle, any shape. I need to place the text frame inside the path such that no part of the text frame overlaps the boundaries of the path art.
I looked at the forum and found the following thread: [URL] .....
Here, its stated that the method AIPathfinderSuite::DoFrontMinusBackEffect of the API did the required task. I tried the same but couldn't get it to work.
My first preference is to use the Illustrator SDK, not any third party libraries.
Is there any way to export coordinates of a point created using the paths tool? I'm trying to determine the distance of each of the points in the attached picture from the blue mid line.
View 2 Replies View RelatedSo i've got a stroke in a circular path. I use the scissor tool and cut a segment of it out. Now, i want to move one of the end points up and have the anchor points after it follow the movement to keep the smooth line. I think Flash had a tool like this. It allowed you to manipulate one point that would affect the whole path depending on how extreme or what direction you went.
View 1 Replies View RelatedI want to point the AutoBackup folder on each local machine, and not all at the same place. For that, I need the Variable that use MaxScript to take the WindowUser and replace it in the configuration.
Rightnow:
C:UsersmyUserAccountDocuments3dsMaxautoback
Later:
C:UsersWindowUserAccountDocuments3dsMaxautoback
I've tried the relative path, but it doesn't work properly
How do you add the motion path of a tracking point to a clone stamp without the clone stamp assuming the same initial/continuous positions of the tracking point?
Is there a way to keep the clone stamp's initial position and then add the path onto it?I am using the clone stamp to remove unwanted duct tape that was used to keep lights on a wall.
When creating a work path on a new layer, the path is a grayish black color is there a way to create that path to be a different color, yellow for instance? Using CS6, I don't see it in preferences anywhere
View 7 Replies View RelatedI'm trying to stroke my work path with a brush I tailored myself. now, when I create a workpath from my text layer and switch to my top layer to try and choose 'stroke path' the option is shaded out.
View 10 Replies View RelatedI'm trying about 8 hours to convert a Photoshop shape in to a working path in order to put a brush border around it. I don't understand why the "stroke path with brush" is grayed out and not usable directly on the shape path itself.
"Load path from selection" is not an option because it deforms my path.
I want to be able to transpose the perspective of the existing image to my new 3D prism shape.Why can't I create a path.. and then drag nodes on that path.. and warp the pixels at the same time???
It shouldn't apply to just 3d.. because I should be able to draw a rigid path around anything and warp / stretch the image from those points.
As a beginner i'm learning day by day how to use photoshop. Among the functions i 'd like to handle with there's the vanishing point (in the filter menu). However i can't modify the angles of my selection to change the perspective grid.
Take a look on this video at 03"57 (it is what i want to do): [URL] ...... Do i have to set something up before.
Is it possible to drag/move a point in an image so that all imaginary lines emanating from that point remain emanating from that point? Something like what's shown in the attachment.
View 3 Replies View Relatedi like to know how this is done?
the corner part.
Having made a (ex circular) closed path within a (ex square) path, I want to turn this into a selection in which the inner circle is omitted from the selection. But when choosing "Make Selection", only the first option,"New Selection" is available, the other three are grey (Add to, Subtract from and Intersect).
This used to work in CS7,
I'm wasting time having to place my image in Illustrator then manually line up the clipping path. You used to be able to save a file with a clipping path as an EPS in photoshop, select "retain vector data", place in illustrator and hit cmd Y to see the clipping path. I need the image and the clipping path in Illustrator and the image is too complex to create a mask in Illustrator. I tried to save it as an EPS but "retain vector data" is grayed out.
View 2 Replies View Related