AutoCAD LT :: GPS Path Mapped Need To Place A Symbol Over Each Point

Jul 10, 2013

I have imported a path of GPS points and have them mapped in autocad where I want them, what I now need to do is place a symbol (a circle with an M in the middle of it) over each dot. I have the symbol as a separate layer but know no easy way to add this symbol to each dot so that the dot is in the centre of the circle. I can simply copy and paste the symbol and drag manually to each dot but this will take forever as there is over a thousand dots and accuracy of the dot being centered would not be spot on.

View 5 Replies

Illustrator :: Scale Mapped Symbol Without Going Into Extrude / Bevel Palette?

Feb 27, 2014

How do I scale a mapped symbol without going into the extrude/bevel palette? I just want to take the 3d art and scale it up. I don't want it to just scale the object, I want it to scale the mapped symbol in the object as well.

View 2 Replies View Related

Edge Animate CC :: Call A Symbol From The Symbol Panel And Place It On Stage?

Apr 25, 2013

Can I call a symbol from the symbol panel and place it on the stage?

View 2 Replies View Related

Edge Animate CC :: How To Dynamically Set A Symbol Name That Has Been Parsed From XML To Build A Symbol Path

Mar 20, 2013

Is there a way to "eval" or dynamically set a symbol name that has been parsed from XML to build a symbol path? For example, I'm trying to dynamically set a variable to the path of a sysmbol already on the stage, but it's not working correctly:

var xmlSymName = $('symName', this).text(); // where symName = "sym4" from a parsed XML node
var whatPOI = sym.getComposition().getStage().getSymbol("sym1").getSymbol("sym2").getSymbol("sym3").getSymbol(xmlSymName).getSymbolElement();

Basically I have a lot of points on a map and I'd like to be able to name the points along with other data like tooltip callouts, etc populated via XML then loop through the XML to build the points of interest on the map. If I can get the above working I can place that variable path reference into an array and grab the data from it later. But the path is not working the way I have it.

View 1 Replies View Related

Revit :: How To Place Flip Symbol On Elevations

Oct 17, 2013

I downloaded a pocket door from Revitcity.com and noticed that whoever created this family had one of the "controls" that flips the family on the elevations. When I am in elevation view my controls are grayed out. Just wondering how to place a flip symbol on the elevations?! I would love to be able to switch the swing of a window or door on the elevations!!

View 5 Replies View Related

AutoCAD .NET :: Using Block Reference As Point Symbol?

Jun 6, 2011

I create a set of points in a drawing and create each point as a block reference containing the point, text and probably something else. Also I would like to use different symbols for points and each of the symbols is defined as a block definition, and for each point I create a block reference according to the symbol type. The question is if is there any way to "combine" block definitions/references? I mean, I have common block definition for all points, whis defines somethin common for all of them. Also I have different symbols for each type of points and each symbol is defined separately as a block. But when a final point is created (containing common definitions and type-dependent symbol) I want to have it as a single block.

View 5 Replies View Related

Illustrator :: Place Symbol Where Cursor Is With Keyboard Shortcut?

Aug 6, 2013

Is there a way to set up a keyboard shortcut that will place a symbol definition where my cursor is?

View 11 Replies View Related

AutoCAD Civil 3D :: Scale Two Point Symbol Parameters?

Nov 5, 2008

I need to scale the trunk and canopy on importing of a points file. I can scale one parameter through the description keys (So i have been doing the canopy) but would like to do both. My code is Tree 0.5 10. Parameter one being the trunk diameter and parameter two being the canopy size.

View 4 Replies View Related

AutoCAD Inventor :: Why Insertion Point Of Sketched Symbol Copied

Jun 20, 2013

When i edit the sketched symbol "Work Stages", i copy the line which the the arrow points at, but with it goes the green insertion point, and i can't delete it.

View 1 Replies View Related

AutoCAD Inventor :: Add-in That Would Place Work Point At CoG Of Model

Jul 12, 2012

I just upgraded hardware and moved from Inventor 10 in XP 32 bit to Inventor 10 in Windows 7 64 bit. Previously I had an add-in that would place a work point at the CoG of a model. The new installation does not, and since I was not the original user of the old computer I don't know where it came from.

I'm assuming it was a 3rd party add-in or something that does not install automatically with the 2010 mechanical design suite (SDK tools maybe?). Any link or where to find this tool in the installed files.

View 2 Replies View Related

AutoCAD Inventor :: Place IFeature With Point And Plane

Mar 13, 2012

In the programming I found an example to place an ifeature on a face.I've modified it to place it on a face without selectset but with features. faces. item(1)

how to place it on that face with a vertex from that face or a workpoint that lies on that face.I've tried to adapt other code on this forum but can't find it.

View 1 Replies View Related

AutoCAD Civil 3D :: Symbol Displayed By Point Number Is A Red Circle Over A Pencil

Oct 9, 2013

We have been bringing points directly into a 2012 Civil 3d drawing using the same method for quite a while. We use a numeric descriptor code and the points are filtered correctly. In this particular drawing, one description code was singled out and "locked" in the drawing. The points and symbol show in the drawing slightly muted but when I try to edit the points I am unable to do so. I have tried the "unlock" command with no result. The symbol displayed by the point number is a red circle over a pencil.

View 3 Replies View Related

AutoCAD Inventor :: Simulate Path Of Ropes Through Pulleys / Sheaves - Constraining In-Place Parts

Feb 25, 2013

I am trying to simulate the path of ropes through pulleys/sheaves etc. It's a bit of a chicken-and-egg set up.

My workflow is the following:

Assemble and constrain geometry

Create plane in assembly than rope will run on.

Create in-place part (rope) with box ticked for "constrain to sketch plane" or the like, referencing above geometry.

Question 1: I see my in-place component is not constrained to referenced geometry, I can drag it around?

I then ground it or constrain to workpoints used as part of the original "project geometry".

I then alter the original geometry and...nothing!

Question 2: How do I get my rope to adapt?

Attached is a mock up - original contains assemblies within assemblies etc. The base has been altered after creating the in-place parts, and the rope has not followed suite.

Inv 2013 Pro

View 1 Replies View Related

AutoCAD Dynamic Blocks :: Level Symbol - Create Point Attached To The End Of Text And Apply Stretch

Apr 5, 2012

I would like to create an dynamic block to a level symbol, with a parameter that aligns the length of the line under the text with the text end.

I attached an jpg image with an example.

I thing the key element is to create an point that is attached to the end of the text and apply an stretch to it, but I didn't succeed.

View 1 Replies View Related

CorelDRAW X5 :: Pattern (Repeat Symbol) Along Path

Aug 1, 2012

s there a way to make patterns (repeat symbol) along paths? Something like using Artistic Media > Brush, but I'd like it to repeat symbol. It's possible and simple in illustrator, but in work I have to use Corel Draw.I need to make something like that: [URL] ..... can't use line style, because the pattern is too complex. Those symbols have to be smooth, so Foster's solution isn't that good...

View 10 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Place Circle On Selected Blocks Insert Point?

Mar 11, 2013

You have a dwg with multiple sets of different blocks and a circle you want to place on the insert point of each set blocks.

You select the circle then select one of the blocks in the set and the circle is placed on the insert point of each of the blocks in that set. It would save time from doing it manually and save on mistakes.

View 9 Replies View Related

GIMP :: Place Text Along A Path?

Jan 9, 2014

I am trying to place my text along a path. I have followed the guides but gimp only places half the text along the path. I don't know what I am doing wrong. I have selected the path, text is on dynamic. It's a curve path but the text only goes up one side and it it not the full text. I have change size of text font everything I can think off.

111.tiff (Size: 281.24 KB / Downloads: 14)

View 4 Replies View Related

Illustrator :: How To Place Text On A Path

Jan 28, 2013

I attempted to place text on a path. I drew an oval, selected text on a path tool. The text start is at the very top and wraps around the path clockwise. I try to select the path 'handle' but I cannot.

View 3 Replies View Related

VideoStudio :: How To See Path And Train Image In Right Place

Jul 14, 2013

I have edited a map and a train image which is fine when applied and the preview works fine but as soon as I create the rendered video the path and the train image have moved to a position further down the map, how to see the path and train image in the right place.

View 4 Replies View Related

Revit :: Place Objects Relative To Point?

Mar 26, 2013

Usually when you draft, you need to place objects relative to other points. Is this not possible in Revit? Temporary dimensions are useful, but sometimes it measures a distance I don't have the value of. If I can't select the relative distance for myself, I have to place the window or door and then adjust the distance afterwards.

View 6 Replies View Related

AutoCAD 2010 :: Path Array Of A Point On Spline?

Apr 24, 2012

Path array of a point on spline, I’m wondering why the path array of a particular point on the spline doesn’t force the points to lie on the spline itself!

Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.

View 3 Replies View Related

AutoCAD .NET :: Calculate Direction In Which Point Moves Along The Path?

Jul 28, 2013

I have written code for the user to select a point on the curve.I need to trace the point along the curve at certain intervals.How do i calculate the direction in which the point moves along the path.Im not using the GetPointOnCurve asit doesnt suit my requirement.

View 9 Replies View Related

Photoshop :: Get Vanishing Point To Work Up Until Place Text Into Grid

Jul 2, 2013

I'm able to get Vanishing Point to work up until I place the text into the grid I've created. It then becomes too big for the grid so it looks as if the grid has cropped it.

it's supposed to say OCCUPY on the ground but instead it's getting cropped and you're only seeing part of it. The original type I placed into the grid was not that large. How can I make sure the text stays within the grid at it's original size?

View 1 Replies View Related

Revit :: How To Change / Set Work Plane While Sketching Path Of In-place Model

May 10, 2012

Possible to change/set the work plane while sketching the path of an in-place model? This guardrail extension is an example of where I would have liked to change the work plane while sketching the path because the path shifted planes. I believe you can do this in the family editor, but I could not get it to work in the in-place modeler. What I ended up doing (as an experiment) was to create masses and picked their edges to get the path I wanted. I would love to be able to have more control over the work plane, like defining the workplane by a face and then being able to move it relative to the face selected.

View 5 Replies View Related

Illustrator Scripting :: JavaScript To Place Image With Calculated Path And File Name?

Sep 21, 2011

Is there a way with JavaScript to place an image with a calculated path and file name? I have 30+ artboards per document, each artboard named by product number. The actual file name of the master AI file is also already established (meaning every document I use this new script on will have already been saved).

Here's the scenario I'm hoping to create in the context of the documents mentioned above:

Run a script to "Place" a linked image based on the following calculated path:

["S:SAPCurrent Images in SAPStock Schools"] + [current ai filename minus the .ai extension]+[a hyphen like this "-"]+[currently selected artboard name]+[".jpg"]

This image link can be placed on a new top layer called "Images" or if necessary on the currently selected layer. Dimensions of the placed image should be a pre-determined size 8"x8".

Error if the ai document has not been saved yet.

View 11 Replies View Related

AutoCAD LT :: Not Seeing Mapped Drive

Oct 17, 2013

AutoCAD LT 2007 on Windows 8 - I've mapped a drive to the server under drive letter Z:, then I tried B: just for grins. The computer sees the drive, but when you go to open or save in AutoCAD the drive is not there in the tree. I've also used MKLINK in CMD to create a virtual folder, and ACAD sees the folder, but won't open it or save to it.

View 2 Replies View Related

3ds Max Animation :: Setup System That Allows To Rotate Point 1 / 2 Joints To Place Downstream Spheres Into Specific Locations

Apr 6, 2012

I am trying to setup a a system that allows me to rotate Point 1 and 2 joints to place downstream spheres into specific locations such that the distance and angles between the spheres don't change.

Everything works the way I want (so far), but Sphere04 goes the opposite direction of its IK chain.

What am I doing wrong?

Daveikexample.zip

View 1 Replies View Related

Photoshop :: Add Corner Point To Path

Sep 14, 2012

Is there a way to add a Corner Anchor Point to an exisiting path. The Add Anchor Point tool always creates a smooth point, which I then have to go back and convert to a corner point. Seems to me, in earlier versions, I was able to use the Pen tool, then hold ALT and click twice to achieve this. CS6 doesn't respond to that procedure. Is there some other trick?

View 1 Replies View Related

Photoshop :: One Point Circle Path With Pen Tool?

Nov 26, 2012

drawing a circle path with one point and dragging or something like this.

View 2 Replies View Related

Illustrator :: How To Round Anchor Point On The End Of A Path

Dec 17, 2013

I have made a curved path in Illustrator CS6, just a simple stroke (left in picture). Is there an easy way to round the corner of the end of it? Something like the image on the right? (I just tossed a circle over top to give an idea)