Photoshop :: CS6 Won't Export PNG Correctly
Jun 4, 2012I used to be able to run an action in CS5 which would save a file in png with transparency, but now when I run the same action in CS6 the file is exported as a html file instead.
View 7 Replies
ADVERTISEMENT
Photoshop :: Correctly Export And Animation As Layers From CS 5.1 To Apple's Motion?
Jun 14, 2012I've made an animation in photoshop CS 5.1 with three layers that I want to export to Apple's application Motion in order to work on each layer individually. I can easily make a quicktime file, but I can't work on each layer this way. When I import the photoshop file I get the prompt "All Layers," which I choose, but there is no movement when I hit play on the timeline. Only one frame is displayed when there are a number of different frames, and animations.
I'm using an IMac with 8 gigs of ram and 3 external hard drives with a terabyte internal drive.
CorelDRAW X4 :: SRGB Color Values Not Exported Correctly On PDF Export
Feb 16, 2012When I export vector graphics to RGB/sRGB and open the pdf in another software (like Serif Page Plus, Adobe etc.), the color values are variying a little bit.
For example, my gray value of a logotype in Corel was 118, 115, 113. Now I export as pdf (many logical!! setting of CM tried!!!), any other software that opens the document - also CORRECT CM settings - values are 117, 115, 112. --- The same light variations nearly anytime with any RGB color. Not possible to create vector pdfs of logos for my clients correctly this way! Really bad.
Instead of starting a discussion about Color Management Settings, could any professional, maybe a Corel member check this behaviour in practice and give me a feed-back!? - In the best case let me know the complete settings for Corel CM and pdf Export to get the RGB pdf export done correctly.
(I am currently using X4, but know that same behaviour from X3 and passed again hours to try really all reasonable CM and export combinations, at least I think so. Windows7 and WindowsXP)
CorelDRAW X5 :: Export Doesn't Scale / Space Text Correctly
Oct 1, 2012I have a problem exporting a file to TIFF format as the text spacing becomes "corrupted".The text is just a simple text block, pick any font you want (i.e. Arial). I export the file as TIFF format with the following changes of note:
Do not select "Maintain Aspect Ratio".Change the vertical scaling to something like 140% (nothing magical about 140%, just something that stretches it out enough)
That's it. When the text comes out, the letters are all stuck together, either overlapping or touching. This happens with TIFF, PNG or BMP format, but it does not happen when I export GIF or JPG format. Of course, converting the text to curves prior to export also produces the correct result.
Of course, the reverse also happens if I scale vertical to less than 100%, the characters get spaced out farther than they should. I cannot really convert to PNG then to TIFF as I need to maintain the CMYK colorspace on this one. I also do not "pre-scale" the image correctly in CorelDraw first because I actually need to export the image to several different aspect ratios and I would like to maintain only one "master" source image.
Lightroom :: 4 - Error Message / Export Appears To Have Completed Correctly
Apr 25, 2013When I export in LR4 I get the following message. However the export appears to have completed correctly.
View 2 Replies View RelatedPhotoshop :: CS5.1 Not Working Correctly?
Sep 3, 2012When I start my Photoshop CS5.1 I get an error saying that my standard brushes, standard colors etc. are missing/
View 1 Replies View RelatedPhotoshop :: CS5 Not Working Correctly
Oct 29, 2013'm running windows 7, and am using PS CS5. It has started developing a few problems that are becoming very troublesome. My system is 64-bit running intelcore i5 2320 3.00 gz with 6gb ram. It's a Dell which is probably the main problem to begin with, but here goes.
It won't open any secondary files on the first try. When it doesn't, I have to scroll through folders, then try to re-open the file. Major headache. On my preferences under performance, "Open GLdraw" is not checked.
It often won't let me make any image adjustments on a file, or on a layer unless I close the program and restart.saving files in an unrecognized format. I usually can recover some if I open them with paint, but I find this ridiculous.
Photoshop :: CS5 Not Printing Correctly
Jan 26, 2012I am trying to print a jpeg from Photoshop with no luck. I get a thumbnail sized image every time. One thing to note, if I use larger paper the thumbnail scales up.
HP Compaq 8100 Elite running Win 7 Pro x64 SP1
Adobe Photoshop CS5 patched to 12.0.4
Xerox Phaser 7760DN PS
Photoshop :: Cmd-0 (Fit To Screen) In CS5 Not Working Correctly?
Oct 25, 2012I am running Photoshop CS5, and when I am use cmd-0 (fir to screen) the window reduces to the tiniest speck
View 6 Replies View RelatedPhotoshop :: Pictures Not Opening Correctly?
May 26, 2012When I try and open an image in Photoshop it appears as the image below - I have checked and my Graphic card is on the approved list and I have updated it today but I still have the problem.
If I make a duplicate layer I can see the full image OK, its just when I open the image to start with.
Photoshop :: Layers Not Correctly Moving?
Apr 16, 2013I have created a layer and copied it to a new layer. I want the copied layer to completley cover the eixisintg layer but it won't move right to the edges, it leaves an outline of the previous layer. How can I get it to completelety cover the layer?
View 4 Replies View RelatedPhotoshop :: Why Can't CS4 Resize Images Correctly
Nov 24, 2012my copy of Photoshop can't do it right. Specifically, I'm using CS4, but I have a feeling that doesn't matter.
Step 1 - Create a new file that is 4 pixels wide by 4 pixels tall. (Use basic options: 72 pixels/inch, RGB Color, Square Pixels, etc.)
Step 2 - Using the pencil tool, draw a red dot (1 pixel wide/tall) in each corner. So that the image looks like this:
Step 3 - In the menu, go to "Image" > "Image Size..." and increase the width and height of the image to 400 pixels using "Nearest Neighbor".
Now here's the image I end up with:
So we started with a 4x4 image, and now we have a 400x400 image. The math here isn't too difficult: 4 x 100 = 400. So each of our red dots in the corners should now be 100x100 pixels each. Simple enough, right?
Unfortunately, this was not the case for me. The red dot in the upper-left corner is now 97x97 pixels. The red dot in the upper-right corner is now 103x97 pixels. The red dot in the lower-left corner is now 97x103 pixels. And the red dot in the lower-right corner is now 103x103 pixels.
I guess Photoshop seems to think that both of the following statements are simultaneously true:
1 x 100 = 97
1 x 100 = 103
Photoshop :: Quickmask Not Working Correctly
Apr 6, 2009I can't get quickmask to work correctly in photoshop. Each thing I try to mask and then copy ends up having 50% or so opacity. All the layers are at 100% opacity, and in the quickmask options opactiy is also at 100%. Anyone know what could be wrong?
View 5 Replies View RelatedPhotoshop :: How To Correctly Use Spot Colors
Aug 6, 2008Using CS2, I've created one of those swooshy Macintosh Panther wallpaper images, with various layers of sweeping lines and tinted gradient arcs.
Now I want to create the image using just tints of pantone 519 but I'm unsure of how to work with pantone colours in photoshop. I've pulled up the solid coated pantone library and located the swatch, but how do I specify various tints of this colour?
I've searched the forum and come across spot channels, and have read the photoshop help entry on this, but still can't understand how to do it. From what I've read, I make a selection, then create a spot channel of the colour and set the solidity to 100%. If I want an 80% tint, I just adjust the solidity to 80%. Is this correct, or is the solidity more like transparency than tint?
In addition, how do I create a gradient between these two colours?
Final question - I have an element I want to import from Illustrator that uses the same spot colour. Do I have to deal with this any differently to the normal copy and paste as a smart object?
Steven
Photoshop :: Can't Print Separations Correctly
Nov 28, 2008I have a b&w photo that I have added a spot of red to. I have done this in PS CS3. When I save the photo (as a psd) and import to Illustrator, and I try to print separations, the entire photo separates as cmyk.
View 1 Replies View RelatedPhotoshop :: .jpg, .gif, .psd Won't Display In PS Even Though PS Opens Correctly
Dec 16, 2004I'm working in a Dell workstation w/Windows 2000 professional PS 7.0.
I've tried all the traditional 'associate this file' but nothing works. You double click on the file, Photoshop loads, then nothing displays. Open... or even drag and drop work just fine.
Photoshop :: File > Export > Gif89a Export Filter Is Gone
Jul 24, 2006I'm using Photoshop 7, and suddenly, by Gif89a Export Filter is gone from the
File > Export
Photoshop :: Wind Filter Not Working Correctly - CS5
Jan 11, 2013my Wind Filter is not creating the "tracers" or "trails" that I am used to seeing.My goal is to create a motion effect on white text. The "tails" are not growing in length when I duplicate the filter over & over like it should.
Example: This is the text after applying the filter once.Here is an example after the 3rd time of applying the Wind Filter.
the streaks are remaining within the text. It's not creating the trailing streaks that I need.
Photoshop :: Eraser And Brush Are Not Working Correctly
Dec 28, 2012For some reason photoshop at times will only let me erase or draw within the confines of a specific layer. It seems to happen randomly without me accidently hitting a hotkey of some sort.
For instance in the image below, I was drawing and randomly I noticed I could no longer draw. It would only let me use the brush/erase tool within the confines of the line work I had already established. The only way I have been able to correct this so far is to completely restart photoshop.
Photoshop :: CS6 Photo Down Loader Not Functioning Correctly
Oct 16, 2012CS6 Photo Down loader locks up when I attempt to download photos. Buttons like browse, settings, get media do function. This worked fine with CS5 Bridge on this machine. The machine is a windows 7 box.
I had CS5 Master Suite side X side installed with CS 6 Master Suite. When I noticed problems with the CS 6 Photo Down loader not working correctly I uninstalled CS5 Master Suite. This did not resolve the issue and I am stuck with lots of photos that are unable to be downloaded using CS6 Photo Down loader.
Photoshop :: Pattern Definition Not Working Correctly?
Feb 5, 2013I work as a graphic designer at a company working with CS6. I try to define a pattern but when the dialogue box pops up in define pattern the pattern does not define as I want it to. Instead of defining it as it looks in the image. The pop up turns it into something else. I've taking a screen capture of the problem and inserted it below.
View 5 Replies View RelatedPhotoshop :: Patterns Not Being Reproduced Correctly When Saving
Sep 22, 2012I'm using a pattern in a design for a print ad I'm working on. I'm working at 300 DPI in CMKY mode (16 Bit) and the pattern I'm using isn't being reproduced correctly when the file is saved in any format.
I've changed various settings, tried working in RGB etc at different bit rates, but it hasn't affected the final output. I've used patterns in designs pretty regularly and don't remember having encountered the problem before.
Photoshop :: Image Not Displaying Correctly CS5 Extended V 12.1?
Apr 11, 2013I am having a problem with Photoshop CS5 Extended V 12.1.
The problem:
When I open some files, some shades of BLUE colour is displayed as BLACK However the same file opens and displays correctly if I open it using Photoshop Elements V9.0.3.When I save the file as JPEG and re-open it, the problem returns.Opening the JPEG file in any other application, including PS Elements, does not cause the problem
Source of files The original files came from a Nikon camera, saved in RAW format. It is possible that the original files were corrupted in some way as the shots had an unusual blue cast - which was easily resolved by Photoshop when I originally opened the RAW files.problem is not universal as I've not been able to reproduce it with any other files (RAW or JPEG).
I have calibrated my monitor display settings sRGB IEC61966-2.1 (default)
Other information:
Adobe Photoshop Version: 12.1
Operating System: Windows 7 64-bitVersion: 6.1 Service Pack 1
System architecture: Intel CPU
[code]....
Photoshop :: Keyboard Shortcuts In CS6 Not Working Correctly
Jul 14, 2012Keyboard shortcuts are working sporadically. For instance, when using select all, copy, paste shortcuts to copy from one image to another in a different tab it can take 2 presses of the keyboard to get them to work. This also makes actions unusable.
Using MacPro 2.66 Nehalem 8 core, OS 10.6.8, 32GB RAM, ATI Radeon HD 4870
Have tried:
Adjusting Performance in preferences -currently 25062 memory usage, history states 20, cache levels8, cache level 1024, use graphics processor ticked. Have changed all of these settings with no effect on problem.
Closed all other programs(including all browsers).
Removed any plug-ins. Closed flash panels namely mini bridge.
Having to revert to an older version of Photoshop at the moment as dodgy Keyboard shortcuts make CS6 unusable. Also have a problem with Camera Raw which I have raised in another Discussion that makes it unusable also.
Photoshop :: Sketch Filters Not Working Correctly
Jun 6, 2012Several of my CS5 "Sketch" filters (e.g., Stamp, Photocopy, Halftone) are suddently producing only all-black images, while others are still working correctly.
View 2 Replies View RelatedPhotoshop :: Text Layers Not Saved Correctly As PDF
May 6, 2013I frequently save layouts I do in Photoshop as PDF's. Lately I very often will discover the text does not display correctly in the PDF. One or two lines of text will display as white with a thin black outline, rather than as the basic solid black I'd specified.
I work on a Windows 7 machine with the current version of PS. The text is on layers when I save the file to PDF (from PS), but I do not include the layers in the PDF, so they should be flattening down.
I noticed a few weeks ago when it was also doing this that I updated the program a day later and the PDF's were not exhibiting this issue. But, now it's starting again.
Photoshop :: Place CMD And Batch Not Working Correctly
Aug 12, 2013I am using the "Place" command to embed my transparent logo into all my images that I post.I hand place the logo in the right bottom corner (not "aligned" as it just pushes the logo too close to the edge). My problem is when I create an action incorporating the "place" command and use it in batching, my "hand" placed logo defaults to the center of the screen which I don't want. Is this a bug. Shouldn't the placement go where I actually place it? I am using percentages to resize so that should not be a problem.
When I use the align tool the batch actually works and places it in the absolute alignment position, but that looks terrible.
Photoshop :: Image Is Not Showing Up Correctly On IPhone?
Nov 24, 2012I have a background texture which was create in photoshop which I'm trying to display to iOS. I'm converting it to a PNG-24, and when I put it on the phone, the colors don't come out right (it's suppose to be yellow, instead comes our orangey). I've tried following the instructions here [URL]... changing some of the color settings and I still can't get it to work. The file is only 600kb large and is shown below:
View 13 Replies View RelatedPhotoshop :: CS5 - Smudge Tool Isn't Blending Correctly
Jun 28, 2012My smudge tool isn't working correctly like it should in Photoshop cs5.
Heres an example. :
Photoshop :: Layered Files Not Open Correctly In CS5
Jul 10, 2012I have been using Photoshop CS and have found it very easy to use and navigate and was looking very forward to getting CS5.
Anyway, I have been stumbling around CS5 for a few days now and opened up a template I created in CS. This template had 2 main layers - 1) was the case or card holder and 2) was the colour of the card backs. These are then opened up in Flash as part of the slideshow.
Now, the case layer had a number of filters mainly the bevel and emboss which remained static as this was the case. The colour of the case needs to change to reflect the colour of the actual case. Another issue as well, is where is the little icon at the bottom of the Actions/History palette gone that allows you to change these filters? I cannot find the Bevel filter in the Filters menu.
how I can open the older psd files in CS5 complete with the layers (is this something that has been dropped) and also tell me where the filter button on the Actions/History palette has gone?
Photoshop :: Image Processor Won't Run Action Correctly
Nov 16, 2013I have CS6 (CC) on a Mac (2013). I wrote an action for saving my work. In my normal .psd file, I use multiple layers for editing, etc. I also use a group folder for my B&W conversion. I made an action to utilize the saved .psd file to save both the color and the B&W versions. The B&W action works completely fine. However, the Image Processor will not properly run the color action. It tells me that "The object “layer “B&W”” is not currently available." If I open a .psd file and run it manually, there are no issues.
what do I need to change to have the IP correctly run the action?