I have a b&w photo that I have added a spot of red to. I have done this in PS CS3. When I save the photo (as a psd) and import to Illustrator, and I try to print separations, the entire photo separates as cmyk.
View 1 RepliesI just installed Update 4 for Corel X6 and now I can't print separations from the HP5000 printer. I can composites. When I go to print, the error message says "Nothing is selected to be printed. Check your page range and/or separations settings". It shows current document to print and separations to be printed. It will not advance to the print preview page. It printed perfectly before Update 4.
I need to print separations. I can export out and PDF and print from Illustrator, but what a pain. Should I just do a system restore and forget Update 4 for now?
I've used this function forever in CS4. I switch to the newer and allegedly better CS6 Cloud. @@#$ @!#$ Why does print to PDF not work for color separations work anymore? I installed on 2 different mac computers with mountain lion. I need to get these color seps out for screen print. There's thousands of screen print designers out there doing seps in illustrator, how do I fix?
View 2 Replies View RelatedThe prepping process should be really simple right? Separate colour layers, using Illustrator, then print each layer onto transparency sheets. Well I'm about to loose my mind.
The image is CMYK, its a single spot colour (I think) which is red and the outlines are black. Printer is a Canon ix6500.
I can't seem to separate the colours in Illustrator CS3?! Why?! When selecting Print > Output > Mode > it won't allow me to select Colour Separations.
I've tried to overcome this by selecting Printer > Adobe Postscript and PPD > Canon ix6500 series. This allows me to select Colour Separations, but then it won't print, it only saves it as a PDF, and prints it as is.
I'm trying to print color separations as a Postscript file from Illustrator CS5 and the halftone areas keep showing up as grayscale instead of the specified frequency and angle. I've tried usiing multiple PPDs and options but I'm having no luck.
View 15 Replies View RelatedI am using Illustrator CS3 and 5 and i am in screen printing business, I would like to able to print each screen separations with gradient pattern (dots) to pdf file so i can send it to my printer and the only thing he has to do print the films without worrying about the dot % for the images that have a gradient pattern.
View 4 Replies View RelatedI am using the Adobe Master Collection CS4, and use an Epson RX650 printer, but for the life of me I cannot get Photoshop to print what is on the screen.The prints are dark, and no where near the ones on the screen. I am using genuine Epson Ink, and Premium glossy paper, so as to remove this issue, is this a case of my screen needing to be calibrated?I have considered buying the Spyde Studio calibrator to ensure that this is correct, (do I need to?) and I have read as much as I can about setting up Adobe to manage the print settings and colours, but still no luck.My current settings are as followsIn Adobe Bridge, my creative suit color settings are set to Europe General Purpose 2The in Adobe Photoshop (version 11.0.1) I am selecting under colour management, Document Adoby RGB (1998), Photoshop handles colours, Printer profile is Epson sRGB Colour Space, Rendering intent is Relative Colourimetric, and I have ticked the following boxs, Blackpoint compensation, Match print colours, Gamut warning and Show paper white.
View 15 Replies View RelatedI need to make an 11" x 17" copy of my plot plan for a propane tank installation. I drew everything out the best I could to scale, however I think I may have chosen the incorrect scale. The original complete area was suppose to show 92' x 234' but my actual proposed area is only in a 14' x 10' area. So when I went to print out a PDF everything was super tiny. The original idea was every 2 cubes/squares = 1 foot.
I've tried several ways to the best of my knowledge to correct the problem even attempting to reduce it to 50' x 100' but I seem to get the same problem where if I choose to print it it wont display the Linear Dimensions I have set (as it will print it out super tiny). I even thought of maybe trying a standard 8.5" x 11" then blowing it up at kinko's but same issue.
I cant seem to get my Ricoh 820 to print correctly. Everything is very dark like there is too much black.
If I export the images to jpgs, I get better color replication. The color profile setting for windows 7 with Corel x6 - 64 bit.
I've just replaced all the color carts in an HP DesignJet 510 42-inch inkjet plotter. I drew some parallel lines in ACAD 2012 to test the colors, and I'm getting weird results. The most noticeable errors are: Yellow prints out at a very pale green and Blue prints at purple. Red and Cyan seem to be ok, as well as Orange... I ran a color calibration on the plotter itself and the yellow prints out a very bright, correct yellow.
View 2 Replies View RelatedI'm a new user of GIMP 2.6.11 for OSX, and I can't figure out how to make photo colors print correctly. My printer is an Epson 2200, driver version 8.37. When I print one of my old photos from Mac Preview, colors come out the same as they did when I used this printer from Photoshop 6 on my old Windows PC. When I print the same image from GIMP on the Mac (using the Print command, not Gutenprint, and selecting photo quality and specifying the right paper, etc), the colors are too far off for a simple CY, MAG, Y level adjustment to get back to what I expect. Under image properties GIMP says the color profile of the image is sRGB IEC61966-2.1, and the image appears the same on my monitor in GIMP as it does in Preview. But it appears GIMP may be using a different color profile for printing than for display. is that possible, and if so, how can I change it?
View 3 Replies View Relatedi am trying to plot files that contain arabic font the problem is that i can see it on the screen correctly but when i plot it the letters seem to have spaces between them i tried plotting using different plotter types but it is the same story
View 3 Replies View RelatedI am having an issue with plotting a drawing that includes an xref. I have also included an attachment as reference.
I am working in AutoCAD 2010; I have a drawing that includes another drawing as an xref. The xref is on layer “0” in model space and my titleblock, annotation and viewports are in paper space (layout tab). I am using color dependent plot styles (.STB). The xref is a 3D model created with basic AutoCAD solids representing steel shapes, there are also some line segments representing the steel centerlines. The viewport is a plan view of the 3D steel model, the view is not clipped. Since the xref contains 3D objects when I print the drawing I don't want the “hidden” lines to show up, I accomplish this by setting the viewport shade plot setting to “HIDDEN”.
Here is the problem:
When I print the drawing the xref’s layers do not print correctly but rather take on the properties of layer “0” which has a plot style of “NORMAL” so everything prints in color and with a default lineweight. I want the xref to print using the xref’s layer properties that are defined in the .STB file. One variable that changes the outcome of the printed drawing is the viewport shade plot setting.
If the viewport shade plot is set to HIDDEN the xref prints using layer “0” properties (undesired) and the3D object lines are hidden (desired). See attached Viewport #1
If the viewport shade plot is set to AS DISPLAYED the xref prints using the xref’s layer properties (desired) but the 3D object lines are not hidden (undesired). See attached Viewport #2
The ONLY difference between the two viewports is the shade plot setting, there are no layer overrides and only the xref objects are affected, the objects in paper space print as expected. This only happens with an xref or block. If I bind the xref into the drawing and explode it so the objects are “live” in the drawing everything works fine. Unfortunately I need it to work correctly with an xref.
If I use a color dependent plot style (.CTB) where the .CTB file controls the color and lineweight I am able to achieve the desired results, unfortuneatly my company is determined to use .STB files
I am converting a photoshop doc to greyscale and saving it as an eps. when I place that eps into illustrator and try to print separation the eps is coming out in 4 color instead of just black. if I save that same file as a tiff and place it in illustrator it prints in just black. if someone else in my office opens the eps in photoshop and saves it again then it will print in only black. is there a setting somewhere in photoshop that i am missing that will fix this and allow me to save the greyscale eps correctly.
I am running photoshop cs.
I have a very large number of 4-color TIFFs that I need converted to 2-color PSD or DCS files. Before I do a whole lot of banging my head against the wall — or heavens forbid trying to write my own script from scratch — I'd like to know if it's feasible.
First, I'm not new to this. I don't need instructions on how to create 2-color DCS files from 3- or 4-color art. I do it quite often. Only I do it manually (using different methods, depending on the art).
What I have are hand-drawn illustrations, mostly black line with blue tints. The problem is they're 4-color. The colors are consistent — I have the same 4 tints or shades of blue plus black (or 3 tints of blue and one blue/black mix + black). I have no issues using grayscale + levels to generate the spot color channels, or Select Color Range and different percentage fills in those channels.
What I have is about a thousand of them — yes, literally 1,000 images — and I need them done as soon as possible. I don't relish the idea of going through all of them with the same operation, not when it can be automated.
So that's my question — can it be automated? What I understand is this is primarily a process that requires human intervention — a human brain that can decide "this, not that." Can I create an Action that says (for example):
set theColorRange to 67, 32, 23, 6
select theColorRange
fill channel Pantone Black 4 U 40%
fill channel Pantone Process Blue 100%
set theColorRange to 45, 15, 15, 0
etc...
(PS 5.1, Mac OS 10.5)
Ok, I am modifying a graphic using photoshop CS, and I am creating a spot color/alpha channel on a greyscale image which I am then placing in Quark 4.0.
The problem is that I can't get the image to separate out just my cyan plate when I distill the Quark document.
Is there a way that I can save my channels so I just get cyan and black, or do I need to switch to a CMYK image mode?
So the firm I work at has AutoCAD 2000 and 2007. 2000 is installed on 5 out of the 7 computers, and 2007 installed on 6 of the 7 computers. 2 of the computers running just ACAD 2007 are Windows Vista, while all the other computers are Windows XP. We have an OCE TDS320 CAD Printer, an HP Wide Format Printer and a Panasonic 330 Copier/Fax/Printer. Our Problem is that When you try to plot an ACAD2007 drawing it will only plot it in color. This problem did not exist before 1/12/12.
When I select the Plot Style to print I select "monochrome.stb" which has always worked, now all of a sudden it doesnt. The only way i have found to fix this problem is to change my drawing to layer "0" which is white, so when it tries to print in color it will print black. Another Guy in the firm i work at has ACAD2007 on his computer running XP, he also has 2000 running on the same computer. When he tries to plot on ACAD2007 the same thing happens, so it is not isolated to my computer.
There is a difference though between his Plot Styles on his computer and the ones on mine. His end with .ctb, which works. It only doesnt work when he tries to print a drawing i made off of my computer. Because of this we copied his Plot Style folder for AutoCAD 2007 and installed it into the folder with all of my plot styles on my computer, replacing the ".stb" with ".ctb" That did not work at all. The last thing we tried was to copy over a file that plotted correctly, delete the drawing and draw what we needed, This also did not work. So basically we are thinking that ACAD2007 is not reading the Plot Styles correctly, or the Plot Styles are wrong or currupt.
Can't plot correctly to pdf with transparency hatch. I have several draws with hatch transparency, but when plot do pdf and use dwg to pdf.plot the hatch it´s wrong. See the draws in attachments.
I try to plot to dwf and after plot to pdf use a third part plot pdf like pdf995, arcplot, and others, but the problem its the same.
I use autocad 2012 but the problem it´s the same if I change to 2013 or 2014.
When printing separations, you're having issues printing more than three plates. I've got the OPPOSITE issue: When I'm trying to print only one or two colors of a graphic, it prints all of them.Example:I have black, PMS-A, and PMS-B in my graphic, but I only want to print PMS-A and PMS-B.I deselect black in the separations window, and that should be it, right?Hit print, and all of them print...black included.
I've tested it on multiple printers, and get the same results.This only started happening after my X6 upgrade.
P.S. I should add that when I take the same steps, and then print to file, it still saves all of the plates, not just those selected.
I have tried unsuccessfully to export colour separations from Illustrator (CS5.1 MacOSX). I need the separations in an editable file format, but it seems like I am only able to print separations.
I have tried to print to a file with Output set to host-based separations but even that seems to be impossible. I get an error message "The save as PDF options in the Printer dialog are not supported".
The software is clever enough to do the separations, but somehow it can only print, not export them. Is there any additional software that would pose as a printer but instead of printing would create a file?
I remember using it once for my commercial job in older version. I think it was ver. 11 or 12. Today when I tried HC separations, black appeared in all plates and a change I noticed is that all the colors are changed to Pantone HC process. I remember it well, it used to be CMYK + Pantone orange + Pantone Green.
I don't remember about the black color if it was separated on each plate or not.
Is it possible to make spot color separations from blended shapes.
I blended a red spot colored irregular shape with a spot colored yellow shape and now want to output 2 film positives from my postscript printer. Unfortunately the blended pathes became process colors. I am using illustrator cs 6 on a Mac.
How do I change the Default Advanced Separations Settings?
View 1 Replies View RelatedHaving problems getting the advance key to highlight in this area. I have repeated these instructions and problem still is not resolved.
This is the area that I am having problems with. To customize a halftone screen.
1. Click File Print.
2. Click the Color tab.
3. Enable the Print separations option.
4.Click the Separations tab.
5. In the Options area, enable the Use advanced settings check box.
6. Click Advanced.
7. Change any of the following settings:
•Screening technology
•Resolution
•Basic screen
•Halftone type
You can set the screen frequency, screen angle, and overprint opt. ions for spot colors as well as process colors. For example, if you have a fountain fill made up of two spot colors, you can set one to print at 45 degrees and the other at 90 degrees.
When I go to print and select output, the mode selection is locked and I am unable to select separations. Using CS6.
View 1 Replies View RelatedI have a Roland SP54 with VersaWorks.
I design everything in CorelDraw and want to know how one goes about doing a color separation for cutting just the vinyl,
E.g. I have a 3 color design that I need to cut 3 different color sheets of vinyl. How do I go about setting up to cut?
How can I save the separations without having to manually seperate them into a printable file for the screen printer?
Is there a way I can print seps to file?
I print spot color separations using CorelDraw a lot. Just ungraded from X3 to X5. One problem I am having is in the printing dialog. When a file has, say, 4 colors showing up in the separations section I may only want to print 2 or three of them. I deselect the ones I don't want - but all 4 seps come out. I am wasting a lot of expensive separations.
View 3 Replies View RelatedHow do I change the mode settings in output from composite to separations?
View 3 Replies View RelatedThis discussion is on using RGB file creation techniques to output to ink jet devices. I posted the comments below the link because color management off always pops up in the conversation as it turns to non-postscript devices so I wanted to circumvent the side bar conversation.
[URL]....
First let's get this straight, I've written it and said it about a thousand times, you cannot turn off color management.
When you select simulate color management off in the default application color management dialog, CorelDRAW simply utilizes a different set of color management settings. The rules of color management never change! The application requires guidelines on color and still must have rules that govern conversions, PERIOD.
These rules are not different, only the engines, rendering intents and profiles change. These setting in X5 and X6 can be, in some cases adjusted to simulate previous setting in versions prior to X5 that were labeled color management off, but this label in older versions (X4 and older) were deceptive in their nature, color management was never turned off, just set to a specific configuration.
Simulate color management off (in X5/X6) uses wide gamut cmyk simulation as the CMYK profile, it disengages the color engines (setting CorelDRAW to another internally controlled process) and sets the interface to RGB. It does not turn color management off.
These settings have many uses for industries such as laser engraving and screen printing separations and I support their continued use. Do not confuse this and use these settings for professional output using press work, ink jets or digital printers.
In my color separations in print preview the "use advanced settings" is disabled.
I have loaded cdr graphics suite 12 on my new laptop w/windows 7, and also on my old machine that I have loaded windows 7 on. Cannot register the program any more due to outdated version. problem exists on both computers.
There are other minor issues but this one I use regularly.