CorelDRAW X6 :: Update 4 - Can't Print Separations
Aug 21, 2013
I just installed Update 4 for Corel X6 and now I can't print separations from the HP5000 printer. I can composites. When I go to print, the error message says "Nothing is selected to be printed. Check your page range and/or separations settings". It shows current document to print and separations to be printed. It will not advance to the print preview page. It printed perfectly before Update 4.
I need to print separations. I can export out and PDF and print from Illustrator, but what a pain. Should I just do a system restore and forget Update 4 for now?
View 6 Replies
ADVERTISEMENT
Nov 28, 2008
I have a b&w photo that I have added a spot of red to. I have done this in PS CS3. When I save the photo (as a psd) and import to Illustrator, and I try to print separations, the entire photo separates as cmyk.
View 1 Replies
View Related
Nov 15, 2012
I've used this function forever in CS4. I switch to the newer and allegedly better CS6 Cloud. @@#$ @!#$ Why does print to PDF not work for color separations work anymore? I installed on 2 different mac computers with mountain lion. I need to get these color seps out for screen print. There's thousands of screen print designers out there doing seps in illustrator, how do I fix?
View 2 Replies
View Related
Aug 26, 2012
The prepping process should be really simple right? Separate colour layers, using Illustrator, then print each layer onto transparency sheets. Well I'm about to loose my mind.
The image is CMYK, its a single spot colour (I think) which is red and the outlines are black. Printer is a Canon ix6500.
I can't seem to separate the colours in Illustrator CS3?! Why?! When selecting Print > Output > Mode > it won't allow me to select Colour Separations.
I've tried to overcome this by selecting Printer > Adobe Postscript and PPD > Canon ix6500 series. This allows me to select Colour Separations, but then it won't print, it only saves it as a PDF, and prints it as is.
View 14 Replies
View Related
Feb 15, 2012
I'm trying to print color separations as a Postscript file from Illustrator CS5 and the halftone areas keep showing up as grayscale instead of the specified frequency and angle. I've tried usiing multiple PPDs and options but I'm having no luck.
View 15 Replies
View Related
Dec 17, 2013
I am using Illustrator CS3 and 5 and i am in screen printing business, I would like to able to print each screen separations with gradient pattern (dots) to pdf file so i can send it to my printer and the only thing he has to do print the films without worrying about the dot % for the images that have a gradient pattern.
View 4 Replies
View Related
Nov 30, 2012
I have lost the print preview after 6.2 update. Is there any solution or am missing something at.
CDGS x6.2 - v16.2.0.998Environment: MS Windows 8 Pro 64-bit OSHardware: Intel DG45ID, Core2 Quad CPU Q8300 @2.5 GHz, Memory DDR2 8GB
View 2 Replies
View Related
Feb 21, 2013
When printing separations, you're having issues printing more than three plates. I've got the OPPOSITE issue: When I'm trying to print only one or two colors of a graphic, it prints all of them.Example:I have black, PMS-A, and PMS-B in my graphic, but I only want to print PMS-A and PMS-B.I deselect black in the separations window, and that should be it, right?Hit print, and all of them print...black included.
I've tested it on multiple printers, and get the same results.This only started happening after my X6 upgrade.
P.S. I should add that when I take the same steps, and then print to file, it still saves all of the plates, not just those selected.
View 9 Replies
View Related
Mar 14, 2011
I remember using it once for my commercial job in older version. I think it was ver. 11 or 12. Today when I tried HC separations, black appeared in all plates and a change I noticed is that all the colors are changed to Pantone HC process. I remember it well, it used to be CMYK + Pantone orange + Pantone Green.
I don't remember about the black color if it was separated on each plate or not.
View 3 Replies
View Related
Nov 26, 2012
How do I change the Default Advanced Separations Settings?
View 1 Replies
View Related
Nov 12, 2012
Having problems getting the advance key to highlight in this area. I have repeated these instructions and problem still is not resolved.
This is the area that I am having problems with. To customize a halftone screen.
1. Click File Print.
2. Click the Color tab.
3. Enable the Print separations option.
4.Click the Separations tab.
5. In the Options area, enable the Use advanced settings check box.
6. Click Advanced.
7. Change any of the following settings:
•Screening technology
•Resolution
•Basic screen
•Halftone type
You can set the screen frequency, screen angle, and overprint opt. ions for spot colors as well as process colors. For example, if you have a fountain fill made up of two spot colors, you can set one to print at 45 degrees and the other at 90 degrees.
View 5 Replies
View Related
Jul 4, 2011
I have a Roland SP54 with VersaWorks.
I design everything in CorelDraw and want to know how one goes about doing a color separation for cutting just the vinyl,
E.g. I have a 3 color design that I need to cut 3 different color sheets of vinyl. How do I go about setting up to cut?
View 10 Replies
View Related
Mar 14, 2012
How can I save the separations without having to manually seperate them into a printable file for the screen printer?
Is there a way I can print seps to file?
View 2 Replies
View Related
Apr 4, 2011
I print spot color separations using CorelDraw a lot. Just ungraded from X3 to X5. One problem I am having is in the printing dialog. When a file has, say, 4 colors showing up in the separations section I may only want to print 2 or three of them. I deselect the ones I don't want - but all 4 seps come out. I am wasting a lot of expensive separations.
View 3 Replies
View Related
Nov 11, 2012
This discussion is on using RGB file creation techniques to output to ink jet devices. I posted the comments below the link because color management off always pops up in the conversation as it turns to non-postscript devices so I wanted to circumvent the side bar conversation.
[URL]....
First let's get this straight, I've written it and said it about a thousand times, you cannot turn off color management.
When you select simulate color management off in the default application color management dialog, CorelDRAW simply utilizes a different set of color management settings. The rules of color management never change! The application requires guidelines on color and still must have rules that govern conversions, PERIOD.
These rules are not different, only the engines, rendering intents and profiles change. These setting in X5 and X6 can be, in some cases adjusted to simulate previous setting in versions prior to X5 that were labeled color management off, but this label in older versions (X4 and older) were deceptive in their nature, color management was never turned off, just set to a specific configuration.
Simulate color management off (in X5/X6) uses wide gamut cmyk simulation as the CMYK profile, it disengages the color engines (setting CorelDRAW to another internally controlled process) and sets the interface to RGB. It does not turn color management off.
These settings have many uses for industries such as laser engraving and screen printing separations and I support their continued use. Do not confuse this and use these settings for professional output using press work, ink jets or digital printers.
View 14 Replies
View Related
Dec 12, 2010
In my color separations in print preview the "use advanced settings" is disabled.
I have loaded cdr graphics suite 12 on my new laptop w/windows 7, and also on my old machine that I have loaded windows 7 on. Cannot register the program any more due to outdated version. problem exists on both computers.
There are other minor issues but this one I use regularly.
View 8 Replies
View Related
Dec 2, 2011
I have a complex (includes tints) clip art object that needs printing in a specific pantone color I just convert it to grayscale using edit>find and replace objects>color mode. then print it as a black plate and just use another color on press.
Today I had to send off artwork to another printer. Dang. How to install a macro. Import clip art to be modified to a new document, do not do this in your working document.
Use Edit>Find and Replace> Find Objects
Replace a color model or palette. Next
Leave as is except change Replace with color model to "Grayscale" Next>Replace all
Repeat 2-4 for 'outlines' if you have them.There you now have a gray scale clipart, but the fun continues!You'll need to know what pantone color you want to use. Let's say Reflex Blue. Make a square and color it Reflex blue from a pantone palette.Duplicate the square and create swatches at 90% 80% 70% etc down to white.Select these square swatches, then Windows>Color Palette>Create Palette from Selection. Save palette with a temporary name, it is only time use. Or you could call it 'Reflex Blue'Now go to this website and download the macro "limit colors" URL...
Drop it in your GMS folder in under your username to install the macro. (might have to save the drawing and restart Corel...)Once you reopen your now grayscale clipart document, Select the clipart. Run the macro (Tools>Macros>Run Macros) LimitColors.Posterize select the number of colors in your new palette if you created 10% swatches, go with 11, if you did steps of 20% then you'll do 6 (don't forget white).Run the macro LimitColors.LimitColors and select your new palette you made in step 9.
View 12 Replies
View Related
Mar 29, 2013
i installed the update update x3, but corel open at the start a window "Problem at the Download Update2.exe". Although at ending corel.
View 3 Replies
View Related
Sep 29, 2012
I get the following error message when I attempt to update X6. Not sure what to do about it.
CRC error: The file C:ProgramDataCoralDRAW Graphics Suite X6.1CGS16w_cproc_p_11.1.048_redist_intel64.exe doesnt match the file in the setup's .cab File. The medium from which you are running the setup may be currupted; contact your software vender.
View 5 Replies
View Related
Apr 30, 2013
With the lastest update to Photoshop CS6 it crashes everytime I go to print.
View 4 Replies
View Related
Jun 3, 2011
How to update dwg to pdf driver? Running Autocad 2011.
View 2 Replies
View Related
Feb 26, 2013
This file will crash when I try to print or print preview.
[URL]
No problem printing other files.Btw, from Document Properties, it shows that there are two RGB fills, which I cannot find.
That's the reason why I go into Print Preview to look at the separations.
View 7 Replies
View Related
Sep 4, 2013
I have CorelDraw X4... I created a design like I always do, but I can't print. All the "Print" options are grayed out and won't let me use them.
View 4 Replies
View Related
Oct 31, 2005
I am converting a photoshop doc to greyscale and saving it as an eps. when I place that eps into illustrator and try to print separation the eps is coming out in 4 color instead of just black. if I save that same file as a tiff and place it in illustrator it prints in just black. if someone else in my office opens the eps in photoshop and saves it again then it will print in only black. is there a setting somewhere in photoshop that i am missing that will fix this and allow me to save the greyscale eps correctly.
I am running photoshop cs.
View 4 Replies
View Related
Aug 3, 2012
I have a very large number of 4-color TIFFs that I need converted to 2-color PSD or DCS files. Before I do a whole lot of banging my head against the wall — or heavens forbid trying to write my own script from scratch — I'd like to know if it's feasible.
First, I'm not new to this. I don't need instructions on how to create 2-color DCS files from 3- or 4-color art. I do it quite often. Only I do it manually (using different methods, depending on the art).
What I have are hand-drawn illustrations, mostly black line with blue tints. The problem is they're 4-color. The colors are consistent — I have the same 4 tints or shades of blue plus black (or 3 tints of blue and one blue/black mix + black). I have no issues using grayscale + levels to generate the spot color channels, or Select Color Range and different percentage fills in those channels.
What I have is about a thousand of them — yes, literally 1,000 images — and I need them done as soon as possible. I don't relish the idea of going through all of them with the same operation, not when it can be automated.
So that's my question — can it be automated? What I understand is this is primarily a process that requires human intervention — a human brain that can decide "this, not that." Can I create an Action that says (for example):
set theColorRange to 67, 32, 23, 6
select theColorRange
fill channel Pantone Black 4 U 40%
fill channel Pantone Process Blue 100%
set theColorRange to 45, 15, 15, 0
etc...
(PS 5.1, Mac OS 10.5)
View 1 Replies
View Related
Jul 3, 2004
Ok, I am modifying a graphic using photoshop CS, and I am creating a spot color/alpha channel on a greyscale image which I am then placing in Quark 4.0.
The problem is that I can't get the image to separate out just my cyan plate when I distill the Quark document.
Is there a way that I can save my channels so I just get cyan and black, or do I need to switch to a CMYK image mode?
View 3 Replies
View Related
Jul 17, 2012
I have tried unsuccessfully to export colour separations from Illustrator (CS5.1 MacOSX). I need the separations in an editable file format, but it seems like I am only able to print separations.
I have tried to print to a file with Output set to host-based separations but even that seems to be impossible. I get an error message "The save as PDF options in the Printer dialog are not supported".
The software is clever enough to do the separations, but somehow it can only print, not export them. Is there any additional software that would pose as a printer but instead of printing would create a file?
View 3 Replies
View Related
Jan 22, 2013
Trying X6 I found thing that's really annoying: every time I open my old files I have "Update text...." blue bar appearing.
In fact, for many years of work I have thousands files. So what...everytime I'm going to edit old file I see this blue bar.
Ok, I agree it.s new feather of X6 that let us work with open type. But... everytime appearing blue bar.... it's really uncomfortable. How to switch off this notification? Or set "Update text" to auto to default mode?
In general. there'e many installed fonts with "O" sign, that means Open Type - but pressing Update Text gives NO RESULT.... So, in this case you have good question - For what this notification?...if it doesn't work....
Repeat: How to off appearing "Update Text" notification blue bar?...or set it to AUTO Update default mode and not shown again....it makes me really annoy and slow the works... till fix this problem returned to X5
View 3 Replies
View Related
Jun 1, 2011
I'm having a problem where my settings are not being saved.
I like to have the font be Arial, 12 Point and centered. When I upgraded to SP3, I had to start Corel X5 while holding the F8 key because it would keep crashing. After this, I set everything up the way I like it, but it's not keeping my setting for font, size and alignment. It keeps reverting back to Arial, 24 point, Left every time I restart Corel X5.
The way I try to save the settings is in a blank document, I change the font to 12 and X artistic and paragraph text, then I change the alignment to center and X artistic and paragraph text. Then I click CTRL-J, Document - check Save options... then click ok. Previously this always worked. Under SP3 it doesn't.
View 14 Replies
View Related
Aug 21, 2013
Is it possible to make spot color separations from blended shapes.
I blended a red spot colored irregular shape with a spot colored yellow shape and now want to output 2 film positives from my postscript printer. Unfortunately the blended pathes became process colors. I am using illustrator cs 6 on a Mac.
View 3 Replies
View Related
Aug 20, 2013
how I can get update patches 6.2 and 6.3 for CDX6. On the [URL]6.1 and 6.4 updates are the only ones available.
View 2 Replies
View Related
