Photoshop :: CS5 - Creating Type On A Path
Apr 12, 2012Photoshop CS5. I am trying to type along a path but every time the text stops at the point in the attached screen shot, looks like a cross inside a small circle.
View 3 Replies
ADVERTISEMENT
Illustrator :: Error Message / Can't Create Type (with Type On A Path Tool)
Apr 29, 2013I want to create text on a circle path, so drew the circle, went to the "type on a path tool" and clicked on the circle. I keep getting the message "can't create type". I have tried to use the direct selection tool to select the circle first and without the direct selection.
View 3 Replies View RelatedIllustrator :: Create Single Path To Type On Not Compound Path From Many Paths?
May 11, 2012I have some negative space I created(black area, see first image) that I want to fill with type, not just a simple fill.
Â
Basically I want to create the negative space from a bunch of small minus signs(-) that need to line up as they go across. If I type on each path one at a time as the text doesn't line up that way. This needs to be one continuous path. (see second image)
Â
Unfortunately if I add them together, it creates a compound path, which you cannot type on, unless I am mistaken? So I need them to be a path, not a compound object.
Photoshop :: Creating Work Path On New Layer The Path Is Grayish Black Color
May 6, 2013When creating a work path on a new layer, the path is a grayish black color is there a way to create that path to be a different color, yellow for instance? Using CS6, I don't see it in preferences anywhere
View 7 Replies View RelatedIllustrator :: Extract Path From Type On A Path Object?
Oct 3, 2012Once you've used a path to put type on, how do you get the path back? Everything I do to recover the path deletes it.
View 2 Replies View RelatedIllustrator :: Created Text On Curved Path Using Pen Tool And Type On Path Tool
Feb 13, 2014I created text on a curved path using the pen tool and the the type on a path tool. However, there are portions of the text that I want to taper. For example, my text begins horizontally, continues to the right, and gradually curves downward. As the text curves downward I would like it to taper smoothly into a narrower and narrower text.
View 1 Replies View RelatedPhotoshop :: Moving Type Along A Path?
Apr 1, 2009Starting with a circular shape, I've got type around two-thirds of a circular path. Now I want to grab the sentence and move it to start further down on the circular path. What tool/sequence to I use to grab type and move it along a path?
View 6 Replies View RelatedIllustrator :: Move A Modified Type To A Path / Use Modified Type?
Dec 14, 2013I want to put type on a perfect circular path.But first I need to stretch the type so it is longer vertically.Stretching type and using it as normal is easy.But how in the world do I use the stretched type on a path?
View 2 Replies View RelatedPhotoshop :: CS6 Type On A Path And Work Paths
Sep 19, 2012Has any body else noticed that if you create a work path, then create a shape layer (say a rectangle) and type some text on the rectangle (text on a path) that if you commit the type and switch to the Path Selection Tool to edit the path text (position of the starting or end points) photoshop cs6 replaces your previous workpath with a workpath of the shape layer you typed on?
Â
Is photoshop cs6 supposed to work that way?
Â
Windows 8 x64 and photoshop 13.01 new document a create a workpath create a rectangle shape layer and type on the rectangle shape layer path. The orginal workpath has been replaced by the rectangle shape layer path
Photoshop :: Type Tool - Text On A Path
Mar 6, 2012I created a path with the type tool, selected the path in the Paths panel, I started typing on the path and the type followed the path, though I chose edit > free transform path and scaled it, though the text did not move with the new path and now it is no longer on the path?
1. Why did the text not stay on the path as I transformed it?
2. How do you hide the path so you do not have to see it? I want it there only as a guide for my text to flow across.
Photoshop :: Multiple Lines Of Type Along Path
Sep 11, 2012I have a sort of ring doughnut shape (just to be clear, a circle with the center cut out) and want to add text within this shape. To make the shape, I created a larger circle, then a smaller circle overlapping it and chose "Exclude Overlapping Shapes".Â
I can obviously click within the larger circle and then type along this path, either outside or inside depending on the baseline shift %, but the trouble is my text is multiple lines. When I press 'enter' I don't get a new line, I just lose the typing tool. Surely there's a way to do this? I'm using Photoshop CS6.
3ds Max :: Creating A Path For Path Constraint?
Jun 10, 2011New to 3ds Max. Watched the movie on constraining to a path but it never showed how to create the path. What's the easiest method?
View 1 Replies View RelatedPhotoshop :: CS6 Type On Path Beginning And Ending Points Are Missing?
Apr 2, 2013Photoshop type on path CS6 beginning and ending drag points are missing missing, cant drag type around on path.
[URL]
They don't show up with all the shortcuts I can think of, and it is not just on my computer, but at college computers too.
Illustrator :: 2D Type Along 3D Path / Shape Possible?
Jun 9, 2013I have to make an illustration with a 2D text that rolls on a 3D cilindric path. I don't know if is it possible on AI. Maybe I have to do this on a 3d software?
View 3 Replies View RelatedPhotoshop :: Creating An “Action” To Change File Type From .psd To .jpg
Nov 13, 2004I have PS v7.0 for PC.
I want to create an “Action” that changes the File type from .psd to .jpg, and then use the “Batch” command to change a whole folder on files.
Here’s what happens so far: I open a file. Then using the “action” pallet, I record the following:
Save as…
I change the “Save In” folder to a different folder.
I change the “Format” from Photoshop (PSD) to JPEG (JPG).
Under JPEG Options, I use the default file size and hit OK.
I them hit the Stop button.
Seems simple enough. And it works for the first file.
But if I use this “action” on a second file, it writes over the original file.
So, how do I create an “action” that allows me to automate the “save as” function and change file types.
This must be a common operation. I have 300+ .psd files that I need to change to .jpg.
Illustrator :: Stretching Type While On A Circular Path?
Sep 18, 2013I'm working with a typeface that I need to stretch horizontally while following a circular shape. I don't want to distort it other than the horizontal stretching.
View 2 Replies View RelatedIllustrator :: Type On A Path And Pattern Brush
Feb 19, 20131.) The type "Mariners" sloping downward in an arc. I was able to get the Seattle part using type on a path on a circle and typing on top. Question is, can I also type Mariners on the bottom of that path? I recall that not being the case. Am I supposed to draw another circle over the one that Seattle is typed on and then on that one type on the bottom?
Â
2.) For the stitching, am I supposed to create one stitch and then create a brush, draw a curve and then apply the brush to that curve?
Illustrator :: How To Get Type-on-path To Wrap Object
Oct 1, 2012I have a created a spiral path and added type to it. This spiral circles a planet-like object. This object is not completely circular, therefore overlaps some of the spiral. I would like the type on the spiral to wrap these protrusions. And I have tried the usual way of applying a text wrap (object > text wrap > make). The type on path doesn't seem to recognize the text wrap.
View 3 Replies View RelatedPhotoshop :: 5.5 - Reversed Out When Creating Path
Sep 11, 2013I have PS 5.5. All of a sudden, when I create a path, it's reversed out!
View 2 Replies View RelatedIllustrator :: Unable To Create Outlines With Type On Path
Sep 8, 2012I'm using Illustrator CS4. I am unable to Create Outlines for a font after I had used the type on the Path Tool. I had used the ellipse tool to create a closed circular path, then I selected the Type on a Path tool. I selected my text using the arrow tool and ctrl-shift-o (Create outlines) and then I receive the message: "Can't Create type outlines." Not quite sure why this is happening. Did I miss something? The thing is this - my type is in the position and alignment that I want and I don't necessarily want to work with the Type as a Font but as vector shapes.
View 3 Replies View RelatedIllustrator :: Type Clipping Path Of Vector Pattern
Dec 5, 2012Trying to mask type with a vector pattern (place a vector pattern in a type clipping path), but nothing seems to be working. Never had issue before. Tried path in front, pattern in front, converting type path to compound path, converting vector to compound path. A couple of times it looked like it worked, but the pattern was invisible within the path. Illustrator CS6, on a Mac.
View 2 Replies View RelatedIllustrator :: Reverse The Direction That Type Takes On Path?
Jun 4, 2013I need to change the direction of type on a path. Basically it is writing the sentence backwards right now. I need it to type right to left instead of left to right so the first word of the sentence will be all the way left instead of all the way right.
View 8 Replies View RelatedIllustrator :: Cursor Automatically Changes To Type On Path Tool?
Mar 27, 2013Is there a way to disable this function?
Â
I regularly have to edit text within a grid of lines in illustrator. I can replace/edit text zoomed out, but when I try the cursor automatically changes to the type on a path tool. I then have to zoom in, edit text, zoom back out thousands of times a day. It would save me a bunch of time if I could set the type tool to ignore paths and only select text.
Â
I could take the grid of lines on the files I'm working on and send them to back and lock them, but I am dealing with tens of thousands of files, and it's just not practical.
Â
Any way to get rid of type on a path, or at least prevent Illustrator from automatically switching to that tool when I hover the type tool over a path?
Photoshop :: Question About Creating Text On A Path
Jul 31, 2007I am creating a logo and I need to create text on a circle, but the hard part for me is she wants the first half on top, the 2nd part of the text on the bottom.
obviously i know how to use the circle path tool, but how is a good way to do this for the bottom? I know i can use the pen tool but i have never used it before and it looks complicated.
AutoCAD .NET :: How To Change Path Type Of Xref File From Fullpath
Aug 29, 2012How i can change, path type of xref file from fullpath to no path
View 1 Replies View RelatedAfter Effects :: Open Type Fonts In Afx Path Text Tool?
Mar 5, 2013How do I use an Open Type font varient in Afx Path text tool?
View 1 Replies View RelatedAutoCAD VB :: Line Type Creating?
Oct 20, 2011How can create in vba with line type ?
View 4 Replies View RelatedAutoCAD Civil 3D :: Creating A New Type
Dec 9, 2011I am trying to create a new line type for water, drain, and sanitary. i want the lines to have letters on them
-----------W-------------W-----------
------------S--------------S-----------
------------D--------------D-----------
AutoCAD LT :: Creating Line Type
Jul 12, 2012how do you put a “>”. I’m trying to make a linetype that looks like -> -> -> i know 2,(but i don’t know what goes here),-2
View 7 Replies View RelatedAutoCAD 2010 :: Creating A Line Type
Oct 23, 2012I am trying to create a new linetype. It is a simple linetype, made up of a continuous chain of capsules that I've attached here. I understand that linetypes require shape files and line definition files. However, AutoCAD isn't even telling me how to create the shape file(s) I need to begin making the linetype.
The capsule is .12 units long at its widest, and will need to connect end-to-end.
Xara :: Creating Globe With Technology Type Things In And Around It
Dec 7, 2011Now I am very limited in my use of Xara Xtreme but I am currently needing to create an image of a world globe and around it (maybe even spewing out of it) I would require like something that conveys technology.
View 5 Replies View Related