Photoshop type on path CS6 beginning and ending drag points are missing missing, cant drag type around on path.
[URL]
They don't show up with all the shortcuts I can think of, and it is not just on my computer, but at college computers too.
Is there a way to make a custom vector brush smoothly meet at beginning and ending of the stroke, such as with a circle? I'm trying to create smooth circles with a brush and Wacom. I want a brush rather than a mathmatically perfect circle with a perfect stroke weight-thickness, but I don't like how the two beginning and ending join up. i like the slight variations of human imperfections one gets when using a vector brush, but there must be a way to make the joing points look more smooth, rather than an after-thought prgramming fault, right? Is it possible?
The image below shows my attempts to make as smooth a joint as possible, but it still looks too much like it wasn't meant-to-be.
I'm using Ai CS4, Mac OS10.8.4
I've got two paths. They don't intersect, exactly, a straight path ends at a curved path, but I need the end of the straight path to be curved, to make it look like the two meet perfectly. The two gray paths (a single path, then path->offset for the second) are the outside of a shield shape. The two black lines (paths) just surround text, but currently they overlap the gray paths.
View 2 Replies View RelatedI'm trying to place text to a "curvy" path. I took some screen shots to show you want I'm talking about.
I created a simple curvy path 1 point on each end. (I noticed I drew in a node in the middle of the curve as well. But that actually doesn't exist in the path. I created the text a reasonable size and clicked "Text Along Path". As you can see, it never starts at the beginning of the path. Ever. I have sized the font up, and it gets a little closer to the beginning, but obviously the end of the address flies off the path. I've sized down the text and it will start even further to the middle of the path.
Just got on here and love Video Studio x4 with one exception. When I capture video from my DV8 tapes, sony player, it will miss half of the beginning of the capture. This has happened with more than one tape. If I use Windows Live Movie Maker, no problems.
View 2 Replies View RelatedI want to construct lines between every two line ending point by multi selectio window instead of drawing it manually between lines ending point ?
View 3 Replies View RelatedI want to create text on a circle path, so drew the circle, went to the "type on a path tool" and clicked on the circle. I keep getting the message "can't create type". I have tried to use the direct selection tool to select the circle first and without the direct selection.
View 3 Replies View RelatedIn illustrator, is there a way to reduce anchors points in a segment path without altering the path?
Is there a better and more efficient way to reduce anchors points than using the pen-minus tool?
I have some negative space I created(black area, see first image) that I want to fill with type, not just a simple fill.
Basically I want to create the negative space from a bunch of small minus signs(-) that need to line up as they go across. If I type on each path one at a time as the text doesn't line up that way. This needs to be one continuous path. (see second image)
Unfortunately if I add them together, it creates a compound path, which you cannot type on, unless I am mistaken? So I need them to be a path, not a compound object.
Once you've used a path to put type on, how do you get the path back? Everything I do to recover the path deletes it.
View 2 Replies View RelatedI created text on a curved path using the pen tool and the the type on a path tool. However, there are portions of the text that I want to taper. For example, my text begins horizontally, continues to the right, and gradually curves downward. As the text curves downward I would like it to taper smoothly into a narrower and narrower text.
View 1 Replies View RelatedPhotoshop CS5. I am trying to type along a path but every time the text stops at the point in the attached screen shot, looks like a cross inside a small circle.
View 3 Replies View RelatedStarting with a circular shape, I've got type around two-thirds of a circular path. Now I want to grab the sentence and move it to start further down on the circular path. What tool/sequence to I use to grab type and move it along a path?
View 6 Replies View RelatedHow to get count of path anchor points? I'm pathing right now pearl necklace with very diferent colors and some are almost transparent so i didn't know how to use any masking trick on it. So i'm pathing, pathing and pathing one more time. And after 1+ hour start to wondering is there any way to know how many path points i'd made?
View 10 Replies View RelatedWhen i make a new path with the pen tool and go to fill the stroke path it makes brush dot at all the anchor points? How can i fix this to go back to filling in the entire stroke path?
View 2 Replies View RelatedI am creating a vector shape and I was wondering how to join points. Here is a sreenshot so that you understand my problem better: Or is this just not possible is photoshop and I have to use Adobe Illustrator ?
View 1 Replies View RelatedI am creating a vector shape and I was wondering how to join points.
Or is this just not possible is photoshop and I have to use Adobe Illustrator?
I want to put type on a perfect circular path.But first I need to stretch the type so it is longer vertically.Stretching type and using it as normal is easy.But how in the world do I use the stretched type on a path?
View 2 Replies View RelatedHas any body else noticed that if you create a work path, then create a shape layer (say a rectangle) and type some text on the rectangle (text on a path) that if you commit the type and switch to the Path Selection Tool to edit the path text (position of the starting or end points) photoshop cs6 replaces your previous workpath with a workpath of the shape layer you typed on?
Is photoshop cs6 supposed to work that way?
Windows 8 x64 and photoshop 13.01 new document a create a workpath create a rectangle shape layer and type on the rectangle shape layer path. The orginal workpath has been replaced by the rectangle shape layer path
I created a path with the type tool, selected the path in the Paths panel, I started typing on the path and the type followed the path, though I chose edit > free transform path and scaled it, though the text did not move with the new path and now it is no longer on the path?
1. Why did the text not stay on the path as I transformed it?
2. How do you hide the path so you do not have to see it? I want it there only as a guide for my text to flow across.
I have a sort of ring doughnut shape (just to be clear, a circle with the center cut out) and want to add text within this shape. To make the shape, I created a larger circle, then a smaller circle overlapping it and chose "Exclude Overlapping Shapes".
I can obviously click within the larger circle and then type along this path, either outside or inside depending on the baseline shift %, but the trouble is my text is multiple lines. When I press 'enter' I don't get a new line, I just lose the typing tool. Surely there's a way to do this? I'm using Photoshop CS6.
I'm sure you know you can convert a photoshop path in to a direct selection, but did you know you can convert a selection into or back into a path?
It's as simple as making a selection via a lasso tool, marquee box or magic wand, open the path window from windows and press the "make work path from selection" button on the tool bar. It is as easy as that. However the toolbar button defautls to a tolerance of 2 pixels which can give you a loose fitting path in places.
I have to make an illustration with a 2D text that rolls on a 3D cilindric path. I don't know if is it possible on AI. Maybe I have to do this on a 3d software?
View 3 Replies View RelatedHow do I measure a path between two given anchor points?
View 5 Replies View RelatedI'm working with a typeface that I need to stretch horizontally while following a circular shape. I don't want to distort it other than the horizontal stretching.
View 2 Replies View Related1.) The type "Mariners" sloping downward in an arc. I was able to get the Seattle part using type on a path on a circle and typing on top. Question is, can I also type Mariners on the bottom of that path? I recall that not being the case. Am I supposed to draw another circle over the one that Seattle is typed on and then on that one type on the bottom?
2.) For the stitching, am I supposed to create one stitch and then create a brush, draw a curve and then apply the brush to that curve?
I have a created a spiral path and added type to it. This spiral circles a planet-like object. This object is not completely circular, therefore overlaps some of the spiral. I would like the type on the spiral to wrap these protrusions. And I have tried the usual way of applying a text wrap (object > text wrap > make). The type on path doesn't seem to recognize the text wrap.
View 3 Replies View RelatedI'm used to working with the pen tool in Adobe Photoshop, so Illustrator is just different enough to be problematic, since my automatic keyboard shortcut uses don't quite work. My biggest problem when drawing paths in Illustrator is that I can't figure out how to move individual anchor points without moving the entire connected path. I'm not using the direct selection right, or I don't have the rest of the path deselected properly, or something? How to move only individual anchor points in a path. (I am very tired of trying to move anchor points and ending up scooting the entire path along with it.)
General Information:
Windows Vista (relevant only for keyboard shortcuts, I suppose)
Illustrator CS2
In CS5, and in various documentation it doesn't appear possible to be a way to move multiple anchor points (as it is, in Photoshop). If this is the case... are you kidding me? Even Photoshop can do this.
Quite frankly, on my return to Illustrator, it's, as expected, Adobe has pulled a fast one with their suite of software. What was broken years ago is still broken today.
Photoshop needs the ability to add gradients to shapes, path brushing, symbols, ie the functionality of Illustrator needs to be placed into Photoshop.
I'm using Illustrator CS4. I am unable to Create Outlines for a font after I had used the type on the Path Tool. I had used the ellipse tool to create a closed circular path, then I selected the Type on a Path tool. I selected my text using the arrow tool and ctrl-shift-o (Create outlines) and then I receive the message: "Can't Create type outlines." Not quite sure why this is happening. Did I miss something? The thing is this - my type is in the position and alignment that I want and I don't necessarily want to work with the Type as a Font but as vector shapes.
View 3 Replies View RelatedTrying to mask type with a vector pattern (place a vector pattern in a type clipping path), but nothing seems to be working. Never had issue before. Tried path in front, pattern in front, converting type path to compound path, converting vector to compound path. A couple of times it looked like it worked, but the pattern was invisible within the path. Illustrator CS6, on a Mac.
View 2 Replies View Related