Photoshop :: CC Brush Size Controlled By Tilt Doesn't Work
Aug 2, 2013
Setting the size of a brush to be controlled by "Pen Tilt" (in the "Shape Dynamics" section of the "Brush" window) acts just as if "Pen Pressure" control had been selected.
This behavior can even be reproduced by using the controls in the "Brush Pose" section: overriding the "Tilt X" and "Tilt Y" values has no effect on the size (in a brush where "Pen Tilt" has been set to control size, and with "Tilt Scale" 0), but overriding the "Pressure" value does affect the size.
I'm using Photoshop CC (version 14.0 x64 with the latest updates) in Windows 7 x64, and it's worth noting that the "Always use Pressure for Size", "Always use Pressure for Opacity", and "Enable airbrush" buttons in the toolbar are off, and "Tilt Scale" is set to 0 (since "Tilt Scale" by itsef works according to the documentation). I Also use a Wacom Intuos 3, with driver 6.3.5-3, and pen tilt works great for changing brush opacity or angle. I've seen the very same problem when trying older versions of photoshop (CS5 and CS6).
had it already been adressed to be solved in future versions? Where can I obtain an official response by Adobe?
I'm making a timelapse, and want to remove dust from certain scenes. I found a pretty neat tut from Angie Taylor [URL] which I tried MANY times following here instructions. After numerous failing attempts I would like to know why this don't work.
I have loaded the office copy of Photoshop elements on my computer. It is only being used on one computer. I have tried to log in with my password but when they send the email and I follow the link it can't log me in. I also find the Spot healing Brush tool doesn't work. I have a Windows 7 64 bit.
So why in the world would I update Lightroom in the middle of a job.?
Before I was able to do in and touch up shadowy areas using (K) adjustment brush, but now it doesn;t seem to work. The radial brush does a good job for a defined area but for SPOT touching I have always used the the adjustment brush?
Is there a setting or am I missing something or is this a bug?
I recently bought lightroom 4.1. In the first days, everything worked. But now, the adjustment brush doesn't work anymore! What is the reason and what can i do?
I noticed that the history brush screenshot taken from the fly-out menu (instead of from the camera icon at the bottom of palette) doesn't work. History brush only works if you use the camera icon at the bottom of the history pallette and then select "current layer" for your snapshot from the drop down menu which shows up after you press the camera icon.
I am trying to design a banner for a client, that is 20 feet long.And when I highlight the text and make it 500, 600 pt its fins but as soon as I try and change to 700 or 800, it completely disappears and you cannot see the font.Why can't I do bigger than 600?
Adobe instituted the dynamic brushes in CS5 and I'm fine with that. What I'm not fine with is not being able to hide that pop window that's supposed to aid you with knowing how the stylus is positioned in space. It's annoying. I want to hide it, or at least make it smaller.
I do like the brush icon at the tip though and how it changes shape based on angle.
I have CS6. I used to be able to fade out brushes under the Size Jitter in Shape Dynamics but can't now. I open up CS3 and I can do it in there. why it isn't working in CS6?
I´m working with LR 4.3 for 3 month but since days the "correction" brush doesn´t work anymore. The overlay button is still active and the system reboot I tried more than once ;-). I miss this function and maybe one of you is able to prevent me from reinstalling.
How the animation size can be controlled in a new document in Designer Pro?
Basically I have created a custom size animation as 750 x 245 pixels, this has been exported to .swf flash file. So in the document where I would like to use it, applied the File/Import.
But somehow like this the imported object comes with 192 x 192 pixels dimension, in what the main issue is that this is a square, with big white are around the real animation which was a long rectangle. How I could import the .swf file without those white dimension?
I have an ipart that will has the length and a quantity of patterned features controlled by a table. I've created a work plane that I'll be using when I take this part into an iassembly. The problem is that the features I used to create this work plane (midplane between two parallel planes) do not exist in (2) of the (3) members...so it gives me an error message. I've tried adding the work plane to the table, but 'exclude' isn't a drop-down (and typing it in doesn't work). How to make the work plane "inactive" for those particular members?
I have contacted Adobe about issues with Photoshop brushes recently. My issue is that the brush size is smaller than the circle that represents the brush. In other words, when I hoover over the area that I want to paint or erase with the circle and then click, the painted or erased area is smaller that the circle. It's really frustrating when fine tuning an image, you never know how close you are to what you want to correct. This is only visible when you zoom in quit a bit. I worked with an Adobe tech for over an hour and he could not simulate the problem. Then he finally asked if I was using a retina display, (he was not).
I'm using a tablet with gimp and I want to be able to set the brush size for the paint brush and also for the eraser, separately. What happens now is that I'll set the paintbrush size to 10px, paint for a little while, turn the pen over to erase and the eraser will now be at 10px. So I'll adjust the eraser size to something like 50px, erase, turn over, and now the paintbrush is at 50px. Grrrrrrr... I tried creating new brushes for both the paintbrush and the eraser, but there's no brush size option. This is my first time using gimp so I'm probably missing something.
for some reason when I change brush size by the pallette or the [ keys I only see the cross hairs with a dot in the middle. I've tried ctrl, alt shift to reinsate all settings but still do not see a visual representation of the brush size.
I'm having a difficult time figuring out why my PS CS5 is not loading my brushes properly.
I see the brushes however Photoshop does not load their settings. They all are flate and hard.
All my brushes before in PS CS2 worked properly so I don't understand why CS5 is not. And I have loaded CS5 brushes and still does not read their settings.
Do I have to do something first before loading the brushes?
The PS I downloaded from CC doesn't work -- no illumination and some other functions -- I deactivated and re-uploaded -functions and then crashed agian -- computer is new and shouldn't be the problem.
Firstly - when I create a document at 48x48 at 72ppi, it comes out as you would expect, 48x48 on a screen. However if I enter 48x48 and try to enter 326ppi, it doesn't adjust the canvas size at all.
Also when I have my 48x48 72ppi document open and go to image > image size, and adjust only the ppi to 326...it does nothing! What should be happening is the canvas become 72:326 ratio larger to reflect the new ppi, or in other words, make the canvas size larger in proportion to this so when you take your new 326ppi image to the iphone it is retina at 48x48...however this is clearly not happening.
In Photoshop CS2, I select Help > How to fix and enhance photos > to touch up spots, scratches, and wrinkles. Instead of help on that, Adobe Help Center 2.1 shows up with nothing in it.
How come sometimes the Clone Stamp Tool doesn't clone, and the Healing Brush doesn't heal.
Sometimes I can get it to work, and sometimes I can't.
Sometimes it works only partially. The thing I want to cover over gets partially obscured behind a translucent clone spot.
On a recent attempt, I had the Healing Brush working, but after I made a selection mask to limit the area to be healed, the Healing Brush no longer worked.
I have Opacity and Flow on 100%. I tried a variety of different Modes. Aligned samples is checked, as Layer is set to Current. Layer is not locked. I am working on the top layer of three layers. I set layer to all three posible options, including Current, and Current and Below. I left Aligned Samples unchecked, and then I checked it.
I Reset the Tool in the configuration drop down menu next to the tool icon in the tool options bar. I Reset All Tools.
I ust PS CS5, Windows 7 64 bit, i7 processor, 16 gb of ram
My spot healing brush doesn't drage. The healing brush and all other brushes work normally. Before yesterday it was woking normally. The brush will make a round patch the size of the brush, but I can't paint with the brush.
I have an old version of the creative suite that is all right for what I do (information for a charitable organisation for medical research) installed in 2008. For quite a while now every once in a while when I start up I get a screen asking me to register. But since I already am registered Adobe just said to click on later and go on working. But this morning the screen is empty so I can't click anywhere. I've tried restarting and even turning off the computer and trying to restart my day.
i have photoshop extended CS6 since yesterday and today when i was going to save an animation, go to file- save for web, this appears "the operation could not be completed".
