Which type of the blending mode is supported by layers that use the Fill With Neutral Color option?
A. Normal
B. Dissolve
C. Luminosity
D. None of the above
As you might see in layer panel. there is a blending option applying on text. and when i try to applying new blending option i-e drop shadow or inner shadow to layer shape 5. it will mess with also to text layer.
View 6 Replies View RelatedI see that the new default blending mode when you create a Group From Layers is Pass Through. I will never use this configuration, and would prefer to set my default to Normal.
View 1 Replies View RelatedI have two images on two layers, the one which is on the top has a blending mode set to it (hard light for example) and opacity at about 70%.
What I would like to do, is to save that image (which is on the top) so, that every time I combine those two images, I would get the same result. (By combining I mean applying those images on top of each other outside of photoshop.)
The opacity is not a problem - I can save the image as 32 bit bmp (8 bit alpha channel right?)
I used to use the option to display the "object color" in shaded mode from time to time instead of the "material color". However this does not seem to do anything in MAX 2012.
View 2 Replies View RelatedA Group in NORMAL mode containing a NEUTRAL OVERLAY layer blocks all the layers below and outside the Group with a solid grey color.
View 18 Replies View RelatedI am a newbie to Xara and I have Xara web designer 7 premium.I watched the video tutorial which is very useful, but when I tried to use some of the video lessons I could not find a "Panel Fill" option in the color editor, how I can access it ??
View 2 Replies View RelatedI like grayscale photos, but I don't want to lose the color informations of my layers, because maybe later I want the colors back.
Is there a mode or plugin or something in Photoshop, that lets me display all layers in B/W mode but without having to lose the color information?
I'm working in the multi-channel format, which as you may know, does not support layers.
Does anyone have any tips on experimenting with the layout, without the use of layers?
At the moment, I've been working out the layout in another (layer-supporting) colour mode, and then recreating that layout in the multi-channl mode.
Surely there is a better way of testing different layouts, within the multi-channel mode itself? I'm finding it very inflexible at the moment.
I find that the color fill vector mask previews within the layers panel are not as useful as they were in CS5. Having the vector path along side the color swatch worked better.
View 3 Replies View Related“annotation scale” on the lay out mode,
I’m not sure about the current “annotation scale” in case of lay out mode.
Annotation scale option is displayed only in the model and viewport mode but not in the lay out mode (attached)!
Based on what annotative objects living on the lay out but neither in the model (or viewport) are re-sized? At this mode, there is no option to choose the annotation scale?
On other words, how to choose the annotation scale in the lay out mode?
How to Apply adjustment layers to multiple layers that have different blending modes and keep the colors the same as the adjustment done?
I work in Animation painting Backgrounds. My files are sometimes upwards to 200+ layers.I will use adjustment layers to quickly balance colours and constrast on top of those many many layers.
The only way that I know of how to apply adjustment layers it to every single layer ( by applying I mean I need to get rid of the adjustment layers because we cant use them in production but i need the new colours be applied to all layers underneath ) in a psd is to manually do it By duplicating the adjusment layer 200+ times and then merging each layer to one of those adjustment layers so that that layer can take the adjustment layers effect permanently.
The issue is that Within Those 200 layers I have some layers set to Multiply or OVERLAY. IT obviously wont apply the adjustment layer properly to those layers because those layer blend mode affect the layers under them. The colour wont be the same anymore in the spots that had the multiply blended mode.
[URL]
I have 2 adjustment layers up top. I need to get rid of them by applying them to each layer! I cannot merge any of the layers. We need all those layers for production.I can apply the adjustment layers manually and this works GREAT for all Layers set to normal. THey take on the colour change just FINE.
However, The issue is that layer 6 and layer 4 are both set to mutiply and this screws up the colour once i apply the adjustment layers to each layer manually...
How can i apply my adjustment layers to a file like this with some layers being set to multiply while keeping the layers exactly the same configuration and The new colour taking effect exactly how i looks before i apply the adjustment layers? Now the simple solution is to merge the multiply layers to the layer that it affects HOWEVER I NEED those multiply layers to be separate!
I'm using Photoshop CS6 on a Mac (OS X 10.8.2), and I've run into a wierd problem I've never seen before. I'm creating a seperate layer over a photo, and filling that layer with 50% gray. I then set that layer's blending mode to Overlay. When things are working correctly (and they always have in the past) setting the 50% gray layer to Overlay should render that layer invisible, and it should have no visual effect on the photo underneath.
Suddenly this is not the case, and it looks like the grayscale in the photo beneath the gray layer is much brighter. What's really weird is that I tried to recreate this problem on a couple of other pic files, and the Overlay blending mode works fine there! So the problem seems to be only with this one file. Changing the file from CMYK to RGB seems to lessen the effect, but it's still present.
I have 2 layers styles applied to a shape in Photoshop CS3:
1. Drop shadow with a soft light blending mode.
2. Colour fill with a multiply blending mode.
This shape is on a transparent canvas so I can export it without a background.
If I convert the shape to a smart object it seems to change the appearance of the shadows and the fill to as if they were set to the default "Normal" blending mode. I also get this problem when I export for web and if i merge layers together.
Can someone please tell me how to preserve the blending modes of the layers as this seems an odd thing for Photoshop to do.
When using the brush tool what is the difference between using the brush in color mode on a normal layer vs using the brush in normal mode on a color mode layer?
View 5 Replies View RelatedI have an inner shadow on a picture. What I would like to do is take that inner shadow and make it its own layer so i can use the same shadow to put over different pictures on a website.
View 7 Replies View RelatedI recently had to make the move from CS4 on Mac OS 10.5.6 to CS4 x64 on Vista.
I opened a file and worked on it with no problems on the new CS4 x64 setup. It also saved multiple times throughout with no apparent problems.
When I have tried to reopen the file on the same CS4 x64 Vista setup I get the following errors in this order:
--
This document contains unknown data which will be discarded to keep layers editable. To preserve the original appearance instead, choose Flatten to load composite data as a flattened image.
Options - Keep Layers, Cancel, Flatten
(If I choose Flatten I get this error: Could not complete your request because an unexpected end-of-file was encountered)
I choose Keep Layers -->
--
The file uses an unsupported blending mode. Substitute normal mode?
Options - OK, Cancel, Flatten
(If I choose Flatten: Could not complete your request because an unexpected end-of-file was encountered)
I choose OK -->
--
encountered reading layer
"Shape 1 copy 220"
because of a program error.
Continue?
I choose OK -->
--
Some groupes were found corrupted and repaired.
OK -->
--
Could not complete your request because the file is not compatible with this version of Photoshop.
OK -->
And the file has closed itself.
I cannot open this file on either CS4 on the mac or CS4 x64 on the PC.
As a side note, this particular file is a personal blog design I've been working with on and off for several months so I can't be 100% sure, but I don't believe I have a layer called 'Shape 1 copy 220' as I surely would remember copying a layer 220 times.
Of course, it is annoying that I lost maybe 4 hours work (I have a backup of the original file), but my main concern is this happening again - especially with commercial work. Can anyone shed any light on known issues between Mac and PC versions of CS4?
I've been working on an image where I have multiple layers and different blending modes assigned. When I assign a multiply blending mode for example it takes the white background out of one of my images. When I place the image in indesign the blending mode is no longer applied and the white background is on the image.
View 1 Replies View RelatedSimply adds the two components. But this is only correct if there is no transparency involved.
Once there is transparency involved, it gets more complex. So, what is the math behind the linear dodge blending mode if the top layer has semi-transparent pixels (=alpha less than 1)?
I have a high-res image of a model of a ship that I'm looking to put on top of a seascape image. The pictures below are a lot smaller and cropped then actual.
Here is a crop of the image of the ship, luckily it's on a plain background and nothing more complicated: After much trial and error, Fluid Mask did a decent job and I'm on the fence about saying useable:
However, this is a thought I had when scrolling through blending modes on the ship's layer. Here it is on Multiply:
Obviously it's too dark, but in terms of the edges on the small details like the ropes, it looks great. I got thinking about somehow automating Photoshop to recognize wherever a pixel is different from the background layer below it, Photoshop would be able to tell where the image is and where the background is, since Multiply removes any white but leaves other colors (albeit darker).
I don't know how this would be done if it's possible at all, I'm guessing with some sort of code made into a plugin or something.
I have Windows 8, and Photoshop CS6. All of my blending modes work, except for Screen. I don't know why it doesn't, but I do use it somewhat frequently, and it's really holding me back at this point.
View 4 Replies View RelatedIm trying to make a transparent image that has a drop shadow only onto a menu. Its hard to explain but heres a picture. is there anyway of masking all of the drop shadow that doesn't land on the menu?
View 8 Replies View RelatedI have a PSD file that has a couple layers that are shadows and highlights for t-shirt textures. Then I have other layers that are the colors of the shirts, so I can swap the color out and it looks like the appropriate t-shirt color with the shirt textures and shadows. My ultimate goal is to export the shirt textures with no color background and keeping it a transparent png. I want to use this transparent image on a website that has color behind it and can change the color using html Divs.
The issue is when I turn off the lower layer colors of the shirt the image is not trasnparent it is white. The multiply layers don't stay transparent. Is there a way to export the multiply layers as transparent? Is there a way to remake the layers as a raster image, rather than using the layer blending modes?
what is meant by the term "neutral color"? I would guess that it is any shade between and including black & white on the grey scale?
Question 2..........can the middle eyedropper in CURVES be used on any "neutral color"?
The official documentation on this mode is frustratingly vague: "This is short for "exclusive OR", which is an advanced blending mode that is primarily used for image analysis and not for drawing or image composition." Thing is, I do personally use it to make art. I think if I knew what exactly it did, I could more easily create images that have eye-pleasing results when blended together using xor.
View 6 Replies View RelatedIn CS6 I created a clipping mask with an image above a type layer, and when I lower the opacity of the image layer, it starts turning the color of the text green? Why is this?
1. How could I lower the opacity of the image inside the text?
2. The same thing happens when I try to change the blending of the clipping mask with the text layer beneath it. Why is turning green?
I searched on [URL]... for "dodge burn", and the first two links that came up pointed me to a post entitled "Faking Soft Brushes and the Blur/Dodge/Burn Tool." Maybe I'm not reading it correctly, but it seems that to use that technique you need to use three layers and the Clone Stamp tool. But why not just use the technique described here
[URL]....
where you create a 50% gray (hex 808080) layer, change the Blending mode to Overlay, lower the Transparency-Alpha of the Primary or Secondary color way down (depending on whether you are burning or dodging), and paint on the new layer? Is the other technique better?
I was looking at a Photoshop tutorial, it's for building a galaxy and mostly works for gimp, but there was a mention of "layer blending mode to colour." I was wondering what the equivalent is in gimp, or even if there is one.
View 2 Replies View RelatedI am working with CS6. I am attempting to add shadow to my text, which is a simple enough process. However, it doesn't appear as though my blending modes are working. Putting it on as a Multiply doesn't do anything to the solid shadow catcher. I have seen in the forum that some have had luck by changing the solid color, but this does not work for me.
View 6 Replies View Relatedi just installed after effects and i can't seem to find the SCREEN(superposition) option in the blending mode.
View 1 Replies View RelatedIn the Printer Settings drop down menu both Color Mode and Print Mode are grayed-out. This just happened I cannot think of anything I've done differently.
I'm using OS 10.6.8 and the latest Epson drivers for the 3880. I have re-installed both PS and the Epson drivers. If I print from Acrobat Reader everything seems to work fine, this only is happening in Photoshop CS5.