Photoshop :: Exporting Transparent PNG While Preserving Multiply Blending Mode?
Feb 17, 2013
I have a PSD file that has a couple layers that are shadows and highlights for t-shirt textures. Then I have other layers that are the colors of the shirts, so I can swap the color out and it looks like the appropriate t-shirt color with the shirt textures and shadows. My ultimate goal is to export the shirt textures with no color background and keeping it a transparent png. I want to use this transparent image on a website that has color behind it and can change the color using html Divs.
The issue is when I turn off the lower layer colors of the shirt the image is not trasnparent it is white. The multiply layers don't stay transparent. Is there a way to export the multiply layers as transparent? Is there a way to remake the layers as a raster image, rather than using the layer blending modes?
View 10 Replies
ADVERTISEMENT
Apr 3, 2013
I am working with CS6. I am attempting to add shadow to my text, which is a simple enough process. However, it doesn't appear as though my blending modes are working. Putting it on as a Multiply doesn't do anything to the solid shadow catcher. I have seen in the forum that some have had luck by changing the solid color, but this does not work for me.
View 6 Replies
View Related
Aug 19, 2006
When I blend layers using multiply, and lower the opacity of the top layer (such as to compensate for too much flash), photoshop puts all these vertical lines on the image. The only time they are not visible is when opacity is set to 0% or 100% for the top layer.
View 2 Replies
View Related
Oct 24, 2013
I am working on a project and i am surprised to find a strange multiply blend mode behavior. When i open a new blank document to try again the multiply behavior, all seems to work well.
Is it possible that the document i am working on became corrupted ? I work on a 2012 Macbook Pro Retina 15", Mac OS X 10.8.5 and Photoshop CC 14.1.2.
This is what i see :
- Normal blen mode.
- Multiply blend mode.
View 15 Replies
View Related
Jun 17, 2012
i want layer 1 to overlap layer 2 as if i had erased the white background on layer 1 but i want do it quickly eg by applying a layer style instead of using the magic eraser which can be unpredictable without using the lasso tool to restrict it.
what if the multiply blending mode was applied more intelligently: here's what i mean in pseudo ..IF at least one of the overlapping pixels in either layer is white..THEN apply multiply mode as normal ie multiply the pixel values and divide by 255.
IF neither of the pixels is white THEN only display the pixel in the uppermost layer (in this case layer 1).
i want to speed up the whole process by selecting multiple layers and applying a saved layer style or some other equally rapid method of making the white background transparent.I am not interested in solutions involving the magic eraser, layer masks or anything that can't be applied in one go . I have looked at the 'blend if' sliders in the layer style window but this needs per layer adjustment so is not a time saver and does not always give a smooth overlap anyway.
View 8 Replies
View Related
Aug 30, 2012
I'm trying to merge select layers to send my file to a publisher, but the drawing layer which is set to multiply loses its transparency when I combine layers (the original white behind the image shows). If I flatten the entire file, it works, but I can't do that in this situation.
View 12 Replies
View Related
Feb 10, 2009
I have removed the white background from an image. The transparent background remains preserved when I keep it as a psd. but when I try to save it as a jpg or print to pdf the white background reappears....
View 3 Replies
View Related
Jun 12, 2013
In RGB documents, the 'Darken' transparency blend mode doesn't change colours, but only shows a colour if it is darker that the colour underneath it.
In CMYK documents, 'Darken' acts differently. It does the same thing as 'Multiply': it darkens the top colour based on the colour underneath. In CMYK mode, 'Darken' and 'Multiply' seem to do exactly the same thing.
How can I get an object in a CMYK document to do what 'Darken' does in an RGB document - only show if it has a darker value than the colour underneath?
(why does 'Darken' behave like 'Multiply' in CMYK mode? What's the point of having two different blend modes that do the same thing?)Here's Adobe's official description of Darken. This matches how it behaves in RGB, but not how it behaves in CMYK:
Selects the base or blend color—whichever is darker—as the resulting color. Areas lighter than the blend color are replaced. Areas darker than the blend color do not change.
View 3 Replies
View Related
Oct 16, 2007
I do a lot of work for TV and as such have to often provide flattened layered art to broadcasters. I flatten most layers and flatten layer styles as well.
Question: is there any way to preserve a layer style blend mode when flattening i.e. I have some rasterized text with an Outer glow. The outer glow has a Linear Burn blend mode (or similar).
Is there a way I can merge this layer complete with style to a flat layer and PRESERVE the way it looks? Often I try this and it looks different (obviously because there is a blend mode being implemented with the layer style.
Any pointers how to get around this? I use CS2 by the way.
Another one - I often whack stuff into After Effects and put on an adjustment layer at the top with a gaussian blue (so it blurs everything below). Is there a way to do this in Photoshop i.e. an adjustment layer placed at the top of the layer stack with a BLUR? Any workarounds people know of or is this just something I can do in After Effects?
View 1 Replies
View Related
Apr 29, 2011
Exporting to H.264 while preserving your color correction. I have not found anything definitive that addresses this issue. I'm bringing it up here as I do a lot of web delivery in H.264 and am tired of the color/gamma shift.
View 1 Replies
View Related
Jan 23, 2013
I'm using Photoshop CS6 on a Mac (OS X 10.8.2), and I've run into a wierd problem I've never seen before. I'm creating a seperate layer over a photo, and filling that layer with 50% gray. I then set that layer's blending mode to Overlay. When things are working correctly (and they always have in the past) setting the 50% gray layer to Overlay should render that layer invisible, and it should have no visual effect on the photo underneath.
Suddenly this is not the case, and it looks like the grayscale in the photo beneath the gray layer is much brighter. What's really weird is that I tried to recreate this problem on a couple of other pic files, and the Overlay blending mode works fine there! So the problem seems to be only with this one file. Changing the file from CMYK to RGB seems to lessen the effect, but it's still present.
View 3 Replies
View Related
Jul 15, 2008
I have 2 layers styles applied to a shape in Photoshop CS3:
1. Drop shadow with a soft light blending mode.
2. Colour fill with a multiply blending mode.
This shape is on a transparent canvas so I can export it without a background.
If I convert the shape to a smart object it seems to change the appearance of the shadows and the fill to as if they were set to the default "Normal" blending mode. I also get this problem when I export for web and if i merge layers together.
Can someone please tell me how to preserve the blending modes of the layers as this seems an odd thing for Photoshop to do.
View 2 Replies
View Related
Apr 19, 2009
I recently had to make the move from CS4 on Mac OS 10.5.6 to CS4 x64 on Vista.
I opened a file and worked on it with no problems on the new CS4 x64 setup. It also saved multiple times throughout with no apparent problems.
When I have tried to reopen the file on the same CS4 x64 Vista setup I get the following errors in this order:
--
This document contains unknown data which will be discarded to keep layers editable. To preserve the original appearance instead, choose Flatten to load composite data as a flattened image.
Options - Keep Layers, Cancel, Flatten
(If I choose Flatten I get this error: Could not complete your request because an unexpected end-of-file was encountered)
I choose Keep Layers -->
--
The file uses an unsupported blending mode. Substitute normal mode?
Options - OK, Cancel, Flatten
(If I choose Flatten: Could not complete your request because an unexpected end-of-file was encountered)
I choose OK -->
--
encountered reading layer
"Shape 1 copy 220"
because of a program error.
Continue?
I choose OK -->
--
Some groupes were found corrupted and repaired.
OK -->
--
Could not complete your request because the file is not compatible with this version of Photoshop.
OK -->
And the file has closed itself.
I cannot open this file on either CS4 on the mac or CS4 x64 on the PC.
As a side note, this particular file is a personal blog design I've been working with on and off for several months so I can't be 100% sure, but I don't believe I have a layer called 'Shape 1 copy 220' as I surely would remember copying a layer 220 times.
Of course, it is annoying that I lost maybe 4 hours work (I have a backup of the original file), but my main concern is this happening again - especially with commercial work. Can anyone shed any light on known issues between Mac and PC versions of CS4?
View 1 Replies
View Related
Dec 6, 2008
I have two images on two layers, the one which is on the top has a blending mode set to it (hard light for example) and opacity at about 70%.
What I would like to do, is to save that image (which is on the top) so, that every time I combine those two images, I would get the same result. (By combining I mean applying those images on top of each other outside of photoshop.)
The opacity is not a problem - I can save the image as 32 bit bmp (8 bit alpha channel right?)
View 2 Replies
View Related
Jul 29, 2009
I've been working on an image where I have multiple layers and different blending modes assigned. When I assign a multiply blending mode for example it takes the white background out of one of my images. When I place the image in indesign the blending mode is no longer applied and the white background is on the image.
View 1 Replies
View Related
Apr 11, 2008
I am trying to code a site for a client that has several layers that are partially transparent with different blending modes on the fx options. Normally I'd export it as a solid image if the background repeated horizontally and could be done that way. Problem is that the design I am trying to code does not have a solid color background or a pattern, instead, it has an image.
I need to know how I can get all of these blending modes and into one static layer. When I merge the layers, it just removes the blending mode which causes it to look horrible.
View 2 Replies
View Related
Apr 14, 2003
I took two pictures of my engine. One with the hood up, one with it down, in the same position. What I want to do is do a selection of just the engine, copy it over to the closed hood picture, then be able to "see" the engine inside. I've already done the selections and copying, now I don't know how to get the edges of the copy to blur with the edges of the car. To make it look like you're seeing a cutout of the hood to see the engine,
View 2 Replies
View Related
Oct 15, 2007
I'm having some bother when exporting graphics to web with CS3. Photoshop keeps replacing my colours.
View 4 Replies
View Related
Mar 17, 2013
Simply adds the two components. But this is only correct if there is no transparency involved.
Once there is transparency involved, it gets more complex. So, what is the math behind the linear dodge blending mode if the top layer has semi-transparent pixels (=alpha less than 1)?
View 8 Replies
View Related
Aug 27, 2011
I have a high-res image of a model of a ship that I'm looking to put on top of a seascape image. The pictures below are a lot smaller and cropped then actual.
Here is a crop of the image of the ship, luckily it's on a plain background and nothing more complicated: After much trial and error, Fluid Mask did a decent job and I'm on the fence about saying useable:
However, this is a thought I had when scrolling through blending modes on the ship's layer. Here it is on Multiply:
Obviously it's too dark, but in terms of the edges on the small details like the ropes, it looks great. I got thinking about somehow automating Photoshop to recognize wherever a pixel is different from the background layer below it, Photoshop would be able to tell where the image is and where the background is, since Multiply removes any white but leaves other colors (albeit darker).
I don't know how this would be done if it's possible at all, I'm guessing with some sort of code made into a plugin or something.
View 2 Replies
View Related
Nov 12, 2012
I have Windows 8, and Photoshop CS6. All of my blending modes work, except for Screen. I don't know why it doesn't, but I do use it somewhat frequently, and it's really holding me back at this point.
View 4 Replies
View Related
Nov 26, 2006
i am trying to blend an image onto a background with an inner glow style. however, as the background is multi coloured i wanted the blend to create a transparent border around the image so it fades into the background. I have managed to do it with a fade brush and trace the edge but this gives a straight corner on the edges and I wanted it curved to minimise the contrast.
View 6 Replies
View Related
Jul 3, 2013
I see that the new default blending mode when you create a Group From Layers is Pass Through. I will never use this configuration, and would prefer to set my default to Normal.
View 1 Replies
View Related
Feb 12, 2014
The official documentation on this mode is frustratingly vague: "This is short for "exclusive OR", which is an advanced blending mode that is primarily used for image analysis and not for drawing or image composition." Thing is, I do personally use it to make art. I think if I knew what exactly it did, I could more easily create images that have eye-pleasing results when blended together using xor.
View 6 Replies
View Related
Sep 26, 2013
In CS6 I created a clipping mask with an image above a type layer, and when I lower the opacity of the image layer, it starts turning the color of the text green? Why is this?
1. How could I lower the opacity of the image inside the text?
2. The same thing happens when I try to change the blending of the clipping mask with the text layer beneath it. Why is turning green?
View 4 Replies
View Related
May 31, 2011
Which type of the blending mode is supported by layers that use the Fill With Neutral Color option?
A. Normal
B. Dissolve
C. Luminosity
D. None of the above
View 2 Replies
View Related
Oct 23, 2013
I searched on [URL]... for "dodge burn", and the first two links that came up pointed me to a post entitled "Faking Soft Brushes and the Blur/Dodge/Burn Tool." Maybe I'm not reading it correctly, but it seems that to use that technique you need to use three layers and the Clone Stamp tool. But why not just use the technique described here
[URL]....
where you create a 50% gray (hex 808080) layer, change the Blending mode to Overlay, lower the Transparency-Alpha of the Primary or Secondary color way down (depending on whether you are burning or dodging), and paint on the new layer? Is the other technique better?
View 4 Replies
View Related
May 27, 2012
I was looking at a Photoshop tutorial, it's for building a galaxy and mostly works for gimp, but there was a mention of "layer blending mode to colour." I was wondering what the equivalent is in gimp, or even if there is one.
View 2 Replies
View Related
Mar 20, 2013
i just installed after effects and i can't seem to find the SCREEN(superposition) option in the blending mode.
View 1 Replies
View Related
Nov 11, 2013
How to set my eyedropper tool so that it picks up the result from several layers objects with transparency or different blending modes.
View 3 Replies
View Related
Apr 10, 2013
I have a logo that I want to layer on top of a background image that will together act as the header for the webpage.
The easy thing to do would be to create an image on photoshop layering the background image and the logo, with the logo blend effect, and then save and upload. Problem is that I want the background image to resize with the browser window - without resizing the logo.
Therefore, I figured I could save the background image and logo files separately, and then layer them using HTML and CSS. For it to look comparable therefore, I want to keep the background of the logo transparent. I would also like to set the blend mode of the logo to linear dodge (add) - so that whatever size the background image is scaled to, the logo remains the same size, with the same blend mode. The problem is that when I save the logo as a transparent png file (24-bit), it is not maintaining the blend mode.
(Photoshop CS4)
View 2 Replies
View Related
