I've been using the batch file - export layers to file script for some time. Right now I'm trying to figure out an easy way to have a locked background and do the same thing, but keep the background the same.
Background - Layer 1 - Save
Background - Layer 2 - Save
etc.
Is there a way to do this? I have around 300 images that need the exact same background.
Is there anyway to suppress or disable the save as jpeg options dialog box on individiual images/pictures?
View 1 Replies View Relatedi have a large number of pictures, they all have the same background image.
The background image is a white-to-gray vertical gradient and has some text on the top.
I created an action to batch remove the background - I use color ranges (Select the Rectangular Marquee Tool and the Right Click anywhere on the image and click on 'Color Range')
In the Color Range dialogue i selected 'Add to Sample' and started clicking numerous times along the horizontal line of my background - I am reminding you that my background is a gradient.
After selecting all of the colors (samples) that are in my background I clicked 'OK' and deleted the selection which leaved me with my image and a transparent background - GREAT!!
This method works great if my image has a high contrast with the background - which is about 80% of the cases.
When i use this action to remove the background from images that have WHITE / GRAY colors in them it comes out terrible since the Color Range selects the background AND bright areas on my image and deletes them.
I have the background image saved as a separate file, I want the Batch Action to check the original background image against all of my images and:
-Detect which parts of the image are similar to the original background
-Delete those similar areas
If that is possible, that would probably be a pretty good way to get rid of the background without deleting anything from my image.
Is it possible to do something like that in Photoshop (maybe using masks?!), or is it possible with any other Image Editing Software?
Any way that i can open and correct a batch of 80 raw files in cs4 at same time as it is taking hours to do them singly
View 1 Replies View RelatedI have a folder containing a bunch of old CDR version 12 files. Is there a way to batch save them as X6 instead of having to open them all and saving them one at a time?
View 5 Replies View RelatedI have assembled a wholel lot of scanned pages from my sketch pad into one psd file. That file has guides which I use to register and align every page (each page is therefore its own layer). Is there a way I can make an action and save off each individual layer as its own jpeg? I set up an action but I don't know how to get photoshop to save it with a distinct namespace. The first action I set up basically prompted me to re-name each layer as I saved it, which isn't really saving time. What I want is for the action to start at the bottom layer and turn off the visiblity of all the layers above it, save the visible layer as a jpeg with a name based on the layer and then turn on the next layer's visibitlity and repeat, until all layers have been saved.
View 4 Replies View RelatedIs there a way to set up batch plot so it saves the files on it's own? Right now I have to wait for the box with the name to pop up and then I hit OK and then have to wait for each file like that?
I found a setting and changed it from "Prompt for name" and changed it to "Specify Name" but that did not do the trick.
I am not sure about the etiquette of this as I asked the question at NAPP and have as yet gotten nothing. Of course that could be because I'm impatient and more so after I realized I stood a better chance of not just an answer but several variations on the theme.
For years I have stored my images in a folder that is named for the day they were offloaded into the Windows OS computer. I have accepted Nikon, Canon,and Olympus' name for the individual image. So an image would be E:Images20041107DSC_8765.nef.
I wish to go to my files and rename the files with the date ( the image was) actually taken by the camera. I think this is in the EXIF data but how can I access it?
What I want to end up with would have the same format up to the actual image name but the renamed image would be yyyymmdd[taken]DSC_#####.nef where the ##### would be a sequential number generated by the batch or even me.
I am very new to the photoshop world and am trying to remove an image from its background ( as a stand-alone) and save it. Is there a way to do this in Photoshop CS6? I have looked at tutorials but only found how to remove the image but not how to save the image as a stand alone with no background.
View 2 Replies View RelatedI have saved a image (as a BMP file) with a transparent background. I want to use this image as my wallpaper. However when I show this image on my desktop (as the wallpaper), the background shows as white white color while I was hoping that I will only see the image and the background will be transparent .
View 3 Replies View RelatedI have saved a image (as a BMP file) with a transparent background. I want to use this image as my wallpaper. However when I show this image on my desktop (as the wallpaper), the background shows as white white color while I was hoping that I will only see the image and the background will be transparent
Chow to achieve the desired result.
I have saved a image (as a BMP file) with a transparent background. I want to use this image as my wallpaper. However when I show this image on my desktop (as the wallpaper), the background shows as white white color while I was hoping that I will only see the image and the background will be transparent
View 9 Replies View Relatedtell me step by step instructions on how to cut an image and leave the background behind, and save just the image with no background??
View 12 Replies View RelatedI've created an action that uses the save for web dialogue to optimise images for the web. When I use the batch command to process a full folder of images, even though I have "Override action "save as" command" checked, it ignores this and still uses the location that was used when the action was created.
Apparently this is a known issue in CS6 and previous versions but whether this has been fixed in Photoshop CC?
how to make an action that can export individual layers within a PS document and rename each layers in the process.
I have set up a 320 x 180px canvas and have 'Placed' in about 20 images that all need to be exported with the Save for Web option.
Problem is, when I set the action to Save for Web and choose the destination, Photoshop names my newly exported image as the document's title (for example, 320x180_Canvas.jpg). But as soon as I try to make it move on to the next layer, it will automatically replace the first exported image with the new one, renaming it the same way, and so on and so on for the next 2 layers...
So essentially, I can only export one layer at a time - unless I make an action to Save for Web for individual documents and not layers (so instead of having one document with 20 layers, I have 20 documents with one layer)...
I must be missing a crucial point here.
How do I save an image with a transparent background. I check of transparent background when loading up an new image. I set my image dimensions make color transparent and go. When I save the file in jpg it previews with a white background. I need to use my logo on different color media each time the logo sits in a white box.
View 1 Replies View RelatedAfter removing an image from a background, what is the proper procedure ( in order) to "save" the image to "file", for later use?
View 1 Replies View RelatedI have ps 7 with image ready. Whenever I try to open a file in image ready I get the following error message.
"Could not complete this operation becuase an assertion has failed."
If I open the file in PS first and then switch to Image ready it will work but then I egt the same error message when trying to save it.
I have re-installed ps but still no luck.
I am trying to attach a number of tiff files to individual dwg files. There are about 300 so I am writting a script that will open a new dwg, insert the tiff and save the dwg at a given name, so i have filedia set to 0 and everything is user input.
The problem I am having is that when I use the iinsert command and enter the path for the tiff I get this error: (filename)was not found or is not valid. This is pathed to a network drive. When I copy the same folder to my c: drive and run the command everything works as should. is there any reason for this?
When pathed to the c: drive and working correctly it looks like this:
C:UsershbrittDesktop11301 DCS Migration Phase 2 Execute Engineering Detail DesignDRAWINGSWORKING SETLOOPSDEMOD70-B-F101.TIF
When pathed to the network it looks like this:
G:EngineeringCURRENT JOBSMOTIVA11301 DCS Migration Phase 2 Execute Engineering Detail DesignDRAWINGSWORKING SETLOOPSDEMOD70-B-F101.TIF
I get this error:
G:EngineeringCURRENT JOBSMOTIVA11301 DCS Migration Phase 2 Execute Engineering Detail DesignDRAWINGSWORKING SETLOOPSDEMOD70 was not found or is not valid.
I noticed in the error message it cuts the end of the file name off. Is there a character limit?
I have done this before with a path to the network and everything worked as should. We have recently upgrade to 2013 but i would'nt think that would be an issue.
So basically, file on local drive everything inserts fine. File on network, get error.
Is it possible to create a new layer, and then save it to be merged later? The reason I ask, is that I am restructuring maps on my website, a process which requires repeated file saving and although I am working on the files in TIF format, they tend to degrade after a while. To work without saving is high risk, as a great deal of hard work can easily be lost, as I have found out. I thought that if I could spread out the saving process, it would improve matters.
View 3 Replies View RelatedAny way to batch rename a folder full of image files to reflect a specific column in an excel sheet? I have a client who I am shooting product photography for, but I need to rename these images to reflect the part number of each item. These are not in any sequential order.
Either using LR5, CS6 or Bridge.
AND/OR a open tab recovery cache or way to extract the images that get lost during a crash of PDN.
Number two on my list behind your fantastic new layer functionality that I had been dreaming about for three years. I NEVER close PDN. The ONLY time it closes is once every week or two when the 20, 30, 50 tabs that I have open, finally overwhelm my system. I bounce back and forth so much that there is no way to continuously save them as I make changes cause it would jack up my workflow by taking up too much time.
No way around it, this is just how I work. It would be lovely if PDN was able to, similar to After Effects, popup an error box saying it was about to crash and did 'you" want to save the session. Especially, now, with 4, as while it is a super duper version upgrade, the crashes were daily, with me, and I couldn't keep losing that much data. Sophie's choice, for me. The old layer window or daily crashes.
I am linking to the exact same background image file (TIF) in more than one illustrator file. This image is on the bottom layer in four different files.
The opacity on the image and the image's layer is set to 100% in all the files. In the dialog box for each of the layers that contain the image, the "Dim" control is unchecked. There are no other higher layers that contain artwork that might interfere with the image's appearance.
Yet...in two of the files, the image looks full and vibrant. In the other two files, the image looks dim and faded.
Is there another control that I'm missing that might be causing the image to be faded. (I want it to be full and vibrant.)
Am I missing something with the apply image command? Couldn't I perform the exact same task just by blending individual layers or images?
View 4 Replies View RelatedI got over 160 color corrected RAW files from my photographer when I thought I was getting TIf or PSD files. I need to put them into an in design doc to send out for printing. Is there a way to convert all of these in one fell swoop without messing up the work that has already been done?
I didn't allow in my timing to save each one individually since i didn't know I was going to need to do this. I am really unfamiliar with batch processing, so how to best go about this, or if I even can. I am working in Photoshop CS6. version 13.06 x 64.
I cannot figure out how to make a batch process do some work on files in a folder, then "Save for Web..." each file into a new folder, without having to hand click on save/etc dialog windows.
I want each out file to have the same name as the input file, but put into a different folder.
I am trying to move individual files from one folder to another within lightroom, but seem unable to do so or figure out how.
I don't want to move an entire folder, as there are only 2 pictures that I need to move,
As a side note, I'm using Windows and I've tried to click and drag, right click etc.
Is there a way to do this? Is there a script out there that can create individual Symbols from individual layers?
EDIT: I pasted this in the wrong forum so i moved it over here.
After I've finished editing or combining photos, I try to save them and all that gets saved is a blank image. How do I get the program to save my images properly?
View 8 Replies View RelatedI've been taking 2000 head shots on a white background. While I was shooting I saw a grey area in the upper left corner showing up. At the moment of the shooting I didn't have the occasion to change lighting.
Removing this one by one works perfectly using the dodge tool and removing just the highlights. Is there a way to do this in a batch? (since the heads are all very centered in the frame and the grey area is always in the upper left corner).
I recently made some frames for an animate gif with PDN, and all the frames are in layers on one PDN file. Is there any way to mass save the layers as separate gifs? The PDN file consists of 100+ layers, and I want to avoid flattening, saving, and undoing X 100 :shock:
Edit: I think I found something that should work:
viewtopic.php?f=16&t=24313&st=0&sk=t&sd=a&hilit=save+layer