If I select the vetor mask of a layer, then easily I can use the "add to shape area" feature, and as such, two different shapes will behave as one.Of course I must first select the vector mask.But, is there a way I can go the other way?
First creating a shape layer and then adding it to a layer, using the "add to shape area" feature.
Working through CS4 Classroom In A Book. Page 257 tells me to sellect the Subtract From Shape Option or press either the hyphen or minus key. There is no Subtract From Shape Option on my tool box and pressing the hyphen or minus key does nothing.
View 3 Replies View RelatedI remember on Photoshop 7.0 (Which I had before CS3) you could select the area of one layer by holding Ctrl+Clicking on the layer.
But in CS3, when you hold Ctrl+Click on a layer it adds it to the selection such as Ctrl does in normal Windows and Mac use.
Does anyone know the way to select a layers area in Photoshop CS3?
Is there anyway I can undo "add to shape area" effect. I am not talking about the case where I can go back with step backward. I am talking the case where I have saved my work, closed Ps, reopen it, and then undoing the "add to shape area" effect.
View 11 Replies View RelatedI need to place a circle selection around a ring shape in a gif graphic and then delete the background outside of the ring shape. The gif I am working with is a square shape with a green background and on that is a white circle shape with lettering going around it and a small pic inside the circle shape. I want to only use the white circle shape with the text going around it and the pic inside and discard the green square background appearing outside the ring.
View 4 Replies View RelatedI am owner of the Xtreme5 Xara version (i've not already get more recents ones ! ), and I would like to know if it is possible to change the text area, not to have a squirreled shape for this text. (Or if there another method, I am interested in too !)
Very useful when you have to surround the shape of a picture, for instance...
I put a simple picture to explain easily... :
I work with maps, and i hatched a area, with a irregular shape, now i want to know this area, how can i proceed?? I already selected all area and clicked on properties to see Geometry information, acumulative... Did the List Comand.. and nothing.
View 9 Replies View RelatedI've recently migrated from AutoCAD 2008 (non-industry specific) to AutoCAD 2010 so I don't know if this was an issue in 2009.
Back in 2008, when I choose the 'window' option when specifying a plot area, AutoCAD would show the workspace so that I could manually select a windowed plot area, and at the same time the whole workspace would be greyed out except the previously active window area.
This was handy, because we can have as many two dozen title-blocks (and therefore separate viewports) in paperspace, and knowing what plot area I last plotted or added as a saved page setup.
In 2010, it no longer does that. I now have to rely on the dashed border to know where the active plot area is/was (checked 'display printable area' in options>display tab) which I personally don't really like using.
How to changes the settings for the "Square Area" in mapcheck's closure summary. When I right-click the dwg name in the Settings tab of Toolspace and choose Edit Drawing Settings, then Ambient Settings, I see the Area settings, but in the closure summary, there is also "Square Area". Why are these both there? It WOULD be nice to show sq. ft. as well as acres, but I can't find anywhere to edit it.
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
Photo editing. How do I select an area within a .jpeg image so I can blur that selected area?
View 2 Replies View RelatedI want to know if there is an easier ACAD solution for drawing. In the given triangle of ABC (sides and angels are known) I want to draw line CM so that the area of BCM becomes 2000 cm (are of ABC is 5311.7 cm3).
Is there an easy ACAD way for drawing this line without using trigonometry for calculation?
See attached file.
How can you do the area takeoff of only the selected faces (red area)?
Right now I have to use the 3rd party software to do something like this. I'm curious if there's a way to do inside Revit?
I need to determine whether an area intersects with another area.The left case can be easily determined by Polyline.IntersectWith(Polyline...).But in the right case, the two polygons intersect/overlap each other while polylines do not intersect.
What would be the efficient way to determine the right case polygons are intersecting polygons?
After selecting the area type tool, I try to click and drag but I get an error message: You must click on a non-compound, non-masking path to create text inside a path. This worked before but I must have screwed something up.
View 3 Replies View RelatedIn Photoshop CS6, when you have a shape layer with a layer mask, and the two are not linked together, and the layer mask is selected, you should be able to scale the layer mask independently of the shape. What actually happens is the shape gets scaled and the layer mask stays untouched. In fact, even if you option-click on the layer mask to show the mask by itself, and then try to scale it, you still end up scaling the shape instead of the mask. Even if you go as far as to make a pixel selection of the layer mask and attempt to scale the pixels, the shape still gets scaled and the layer mask still stays put! Unbelievable!
This works correctly in CS4, but not in CS6 (don't know about CS5).
I want to make a vector shape from a path. Is there a way to bypass having to define a new custom shape? I just want to quickly add the vector shape to a new layer, but I don't need it defined as it'll just be used once.
View 5 Replies View RelatedShape making from multiple complex shape and path layers?
so i have few layers(all vector paths and shapes) .
now how to make a shape from all of that. every new shape is layer for itself. I need it for logo.
any way to delete more than a single shape at a time from a shape collection file, other like step by step with the option key? I have one collection with about 400 shapes and would like to save it to some "groups", like people, arrows, devices..
View 1 Replies View RelatedSince the release of Photoshop CC the "Live Shape Properties" has basically chosen when it does and does not want to show up.... sometimes I even create a new shape to replace the old one and it STILL does not show the live shape properties... how hard is it to make sure the options are available at all times? I opt for a discount since this is a half working application and the features you highlighted barely function...
View 1 Replies View RelatedIs it possible to fill a shape with a gradient fill so it goes up to all edges and gradually get darker/lighter inwards? For example, If I have a star shape, can I have a gradient fill in the shape of a 'star'?
View 1 Replies View RelatedI'm creating a logo that consists of the word DIFFERENT in text and a shape, a dot (an ellipse) that I want to appear above the I and be vertically aligned with I.
How can I do this?The problem is that I can't see how to identify the point in the text - the centre of the I - to act as the target. I can't seem to get any of the Snap to Object tools to work.
I feel that I should be able to mark a specific point anywhere on a shape or an object and use those points to align.
I suspect that I could achieve the effect that I want by splitting the text characters up into individual objects, than I can align them more obviously but then I set up some other issues with kerning.
I'm working with CorelDraw X3 and want to fill text into a round shape, while keeping it's exact outline. Hence, cutting of parts of words and letters is fine with me as long as the shape is well-defined. Unfortunately when filling paragraph text into a shape, the automatic line breaks lead to a quite irregular shape regardless of font size.
As workaround I arranged a mask in front of background and text but this requires a square paragraph text which is larger than the background. Since paragraph text obviously cannot be cropped with other objects I made the mask size bigger and filled it white. When exporting my document as image everything looks neat, but there must be a better way to do this in CorelDraw itself?
I tried converting the paragraph text into artistic text and cropping this, which works fine for a few words and a small object. But I'm talking around 1000 words here, and trying to crop this artistic text leads to very random cropping results. I guess such a large number of objects and knots is too much for CorelDraw to handle!?
I want to engrave the text 'TEST' all the way around this clonal object. When I use the emboss tool, selecting the option 'wrap to face,' it gives me an error message that the "face selected is not tangent to the profile plane."
I am using a work plane that is offset from the XY plane. I included a screen shot and the file that I am using (Inv. 2014)
I just read the thread the thread "...plus ask about erasers" but it doesn't answer my question about combining shapes to remove unwanted portions - or at least I didn't quite understand it. Here's my issue. I've created a nice "background" image with ripples and live effects, but it has gaps, and isn'tthe right shape. I need to erase parts of it and clip it to the right shape, but every time I try to do this using the slice tool, it puts the gaps back into the image! Attached is my image and the shape I want to clip it to.
I just tried converting the ripple shape to a bitmap copy and then slicing the shape - that doesn't get me the rippled effect I want - just the shape I already have. Then, I tried just creating the water ripples in my shape - but again that leaves gaps and when I try to "slice" them away it does all kinds of weird things to the shape..
I'm using CS3 on a Mac.
I outlined my text and subtracted it (and the tree image) from the black background. When I did this both appear thinner - particularly the tree.
If I then take the original version and the new subtracted version, and view them both overlayed one on top of the other in wire frame (outline) mode, there is no difference in the actual lines.
It seems to be a problem with the way illustrator previews the images. This wouldn't concern me, but when I export the file as a jpeg, the lines also appear thinner in the export.
I can create a manual solution by offsetting the path before subtracting, but this isn't ideal.
What does it mean when Illustrator v.15.1.0 ceases to contract a shape using offset paths and will only expand a shape? Seems like only yesterday I could render both ways. Wait a minute, it was only yesterday! Why would it suddenly stop funtioning?
View 3 Replies View RelatedI have two layers on the bottom I have text, and on the top I have a shape.
How do I make the shape transparent so the shape may be filled with the background color?
I just installed CD on my daughter's computer and her shape tool only allows for a free form selection by following the cursor in a free form way. My install allows for a rectangular click-and-drag type of selection. I see no options for this tool Is her install bad?
View 5 Replies View Relatedi am trying to draw an aircraft and after drawing the windows, i got stuck. i am trying to revolve a shape around the shape of the window (oval) but it won't recognise that shape as an axis. i can't click it. is there a solution to this?
here is a screenshot for extra info!
Here when ever i click on the editable poly modifier again this happens, now im pretty sure this is not supposed to happen,
i tried searching the internet and several forums but no results (maybe im just missing some 3dsmax vocabulary so i didnt coin the term for it)
How do i use a specific shape to carve out a primary shape
e.g. putting a sphere inside a box (sphere is protruding from all 6 faces) and carving out the box
Edit: changed the image to a link and added the scene file as an attachmentbutcher_knife.zip
I am trying to distort/shape a photo to fit into another shape, in the shape of a shield. Its something that would be reused on otehr pictures.
2 things i would like to do, first is of course as above
the otehr, is there any way to creat like a rubber stamp or a cutting tool, that once I have the shape I want created, I can use that to copy/cut/paste that image shape from otehr images also ?