Working through CS4 Classroom In A Book. Page 257 tells me to sellect the Subtract From Shape Option or press either the hyphen or minus key. There is no Subtract From Shape Option on my tool box and pressing the hyphen or minus key does nothing.
View 3 Repliesi make say a Rectangle, then after i select the oval tool and then click subtract from shape area and then make the oval shape over the rectangle and it subtracts the shape from the previous rectangle shape. Sometimes this works , but most times if i apply any changes to the original rectangle before choosing another shape, the add or subtract from area buttons do not function anymore.
View 2 Replies View Relatedi can't figure out how to subtract the front shape from two already drawn shapes. I can draw a shape, choose "Subtract Front Shape" from the menu and then draw the second shape. But what if the two shapes are already there and i wanna subtract the front shape from the other.
View 7 Replies View RelatedI've got four objects. One of these objects is a cylinder. I want to remove some material from the cylinder. The material which I want to remove is specified by the other three objects.
Basically:
my target model = cylinder - (sum of other objects)
How can i use subtract area command in area command while using add command , often it happens we click on polyline whose area we did not want to consider. How can i do like this, i re click on that enclosed polyline and the area gets subtracted and the green fill goes away?
View 3 Replies View RelatedI have a rectangle that is 400px width by 200px height.Now, I have used just the pen tool to create this. I have a stroke on it and a fill, both being the same colour.What I want to do is add some random shape INSIDE the FILLED rectangle, but I want that to be transparent.
View 7 Replies View RelatedSometimes I have to subtract some outlined text from a larger shape. Usually I just select the shape, and the text group, and execute a compound path. Works fine.
Occasionally, this method is not so convenient If I need to knock out additional outlined text into an object that has already been compounded with some other elements. For this, I use the Shape Tool, minus-ing out the additional text,
What I've noticed is that as I do this, the process gets slower and slower as each path is minus'd out with the Shape Tool. Eventually it can take as long a minute or more to remove more areas. Then I discovered something. I uncompounded the final result to discover that the Shape Tool creates hundreds and hundreds of duplicate paths. And very specific duplicates at that. Here is what I discovered:
I can only draw the conclusion that there is something seriously wrong with this tool. Surely all those extra path copies hidden within the resulting compound path can't be right.
If you'd like to download the AI6 version go here: [URL]...
I am in the 3d modeling view, and have extruded closed polylines. when i go to subtract the object inside the other it won't subtract the command says <Modeling Operation Error: failure in face-face intersection merging algorithm>
I don't know how to fix it.
If I select the vetor mask of a layer, then easily I can use the "add to shape area" feature, and as such, two different shapes will behave as one.Of course I must first select the vector mask.But, is there a way I can go the other way?
First creating a shape layer and then adding it to a layer, using the "add to shape area" feature.
I remember on Photoshop 7.0 (Which I had before CS3) you could select the area of one layer by holding Ctrl+Clicking on the layer.
But in CS3, when you hold Ctrl+Click on a layer it adds it to the selection such as Ctrl does in normal Windows and Mac use.
Does anyone know the way to select a layers area in Photoshop CS3?
Is there anyway I can undo "add to shape area" effect. I am not talking about the case where I can go back with step backward. I am talking the case where I have saved my work, closed Ps, reopen it, and then undoing the "add to shape area" effect.
View 11 Replies View RelatedI need to place a circle selection around a ring shape in a gif graphic and then delete the background outside of the ring shape. The gif I am working with is a square shape with a green background and on that is a white circle shape with lettering going around it and a small pic inside the circle shape. I want to only use the white circle shape with the text going around it and the pic inside and discard the green square background appearing outside the ring.
View 4 Replies View RelatedI am owner of the Xtreme5 Xara version (i've not already get more recents ones ! ), and I would like to know if it is possible to change the text area, not to have a squirreled shape for this text. (Or if there another method, I am interested in too !)
Very useful when you have to surround the shape of a picture, for instance...
I put a simple picture to explain easily... :
I work with maps, and i hatched a area, with a irregular shape, now i want to know this area, how can i proceed?? I already selected all area and clicked on properties to see Geometry information, acumulative... Did the List Comand.. and nothing.
View 9 Replies View RelatedI have the selection saved, I want to load another selection within while subtracting ? I tried the boolean methods, I searched the manuals, even AdobeTV for an answer, I know it can be done, I'm having a brain fart
View 3 Replies View RelatedI'm trying to subtract the figure that is attached to union the 3d solids on the "Layer2" layer and subtract them from the 3d solid on layer "Mesh". For some reason I can't do neither.
View 5 Replies View Related3D Cylinders.jpg.How do subtract/cut the part of the magenta cylinder inside the gray cylinder from the attached pdf?
View 9 Replies View RelatedI am currently working on a 3d model which can be seen attached. All I d like to do is subtract so that when using the HIDE tool I am able to see inside the model. For some reason I am not able to carry this task out.
View 9 Replies View RelatedI have a solid of a vortex breaker for a nozzle in a cone, from which I subtracted the cone. But when I attempt to subtract the nozzle as well, it will not subtract. I have verified that both entities are solids. I copied them into a new drawing by themselves. I even rebooted my computer--all to no avail. I have attatched a drawing of the two solids.
View 2 Replies View RelatedI'm using the AutoCAD Mechanical 2013 student edition and I can't subtract items inside a region that i made. I type the command subtract>select the region to subtract from>Enter>select objects to subtract>Enter and nothing happends =/
Here is my file, if you'd like to take a look (the outer portion is my region and I want to subtract everything that's inside it)
I am in need of subtracting Surface A from Surface B to display the surface intersections between the two. I have a geological top of clay surface and a bottom of clay surface where the bottom intersects with the top thus showing holes in a geological clay layer. I am wanting to know if Civil 3D supports the subtracting of two surfaces.
View 6 Replies View RelatedI have two boxes stacked on top of each other. On the top I have a rectangle which I want to extrude down through the first box and partially through the second box and then subtract the extruded rectangle from the two stacked boxes. Extrude works fine, but when I use subtract it only removes the area from the first box. The bottom box remains solid despite having "extruded" the rectangle down through the bottom box as well.
I've tried joining the two boxes into a single object before using extrude and subtract, but for some reason the join command won't work in this case.
Where I am joining 2 solids (like plywood sitting in a dado joint), how can I have one solid be carved out where the 2nd solid overlaps it, without deleting the 2nd solid.
what SUBTRACT does but without the deleting.
Recently have had AutoCAD re installed and and am having trouble unioning and subtracting the two solids in the attached file. Other objects will occasionally subtract and union with these objects, but only occasionally.
View 4 Replies View RelatedI've recently migrated from AutoCAD 2008 (non-industry specific) to AutoCAD 2010 so I don't know if this was an issue in 2009.
Back in 2008, when I choose the 'window' option when specifying a plot area, AutoCAD would show the workspace so that I could manually select a windowed plot area, and at the same time the whole workspace would be greyed out except the previously active window area.
This was handy, because we can have as many two dozen title-blocks (and therefore separate viewports) in paperspace, and knowing what plot area I last plotted or added as a saved page setup.
In 2010, it no longer does that. I now have to rely on the dashed border to know where the active plot area is/was (checked 'display printable area' in options>display tab) which I personally don't really like using.
How to changes the settings for the "Square Area" in mapcheck's closure summary. When I right-click the dwg name in the Settings tab of Toolspace and choose Edit Drawing Settings, then Ambient Settings, I see the Area settings, but in the closure summary, there is also "Square Area". Why are these both there? It WOULD be nice to show sq. ft. as well as acres, but I can't find anywhere to edit it.
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
Photo editing. How do I select an area within a .jpeg image so I can blur that selected area?
View 2 Replies View RelatedI want to know if there is an easier ACAD solution for drawing. In the given triangle of ABC (sides and angels are known) I want to draw line CM so that the area of BCM becomes 2000 cm (are of ABC is 5311.7 cm3).
Is there an easy ACAD way for drawing this line without using trigonometry for calculation?
I am now modeling elements for silicone formwork for casting elements of epoxy resien.
I would like to schow idea of this formwork. For this I would like to make part representing silicone part of this formwork. It is contained in aluminium "cover" for convenience of use.
In assembly I have placed may model, and aluminium elements representing "cover" of formwork.
I am trying now to model silicon but it is quite hard. I can not use "derivered part" method to substract model and cover elements from some big block body because coordinate systems do not mach in all elements.
In Part there is "combine" function but it only works with bodies mabe within this part.
Is it possible to substract one placed in assembly from anothe part in this assemby?
I need to make about 400 selections to Subtract from a box using ProBoolean. Unfortunately it seems you have to select each individual one. Is there an easier way to do this? Essentially, I have a box and need about 400 holes punched through. I am just trying to determine the easiest way.
Right now I have to click on each cylinder one by one after I have arrayed them in order to subtract them. Does ProBoolean have an option to select multiple objects at once to subtract?
Im trying to subtract a 3D spline from a wall to make a archway. Both are editable polys. When I subtract the 3D spline from the wall using boolean operations It shows the wall as hollow, normally this doesn't happen when I subtract other objects from the wall so what I need to do. I tried looking at existing threads but the only suggestion is collapse the stacks, something that is already done.
Attached are two images showing the problem.