Paint Shop Pro :: X4 Not Processing All Thumbnails
Jul 25, 2012
When I attempt to use the organizer only a few of the files in the folder display a thumbnail in the tray. Most of them show a gray placeholder with an X in the center. If I wait a very long time (several hours), it occasionally will finish updating all of the photos in the folder but not every time. If I exit PSP it seems to close OK but it is still chewing up CPU cycles (17%) and I have to shut down the process in Task Manager if I want to try and re-open the program.
I thought it was just the RAW NEF files from my Nikon D7000 but when I go back a few years and look at the images from my D40 it hangs as well.
I've tried a re-installation but that did not change anything, it still hangs after displaying a few thumbnails.
View 2 Replies
ADVERTISEMENT
Aug 10, 2011
My Canon 7D typically produces a JPG file in the 5B to 12MB range if set to the largest JPG quality. My problem is that if I open for example a 7MB file in Photo Pro X3 and save it again (even if I make no changes) the resulting file is about 2MB. Obviously some compression is happening which I want to avoid/control. Is it possible to set the default compression that X3 uses?
If I use file - export - JPG optimizer I can control things but if I for example want to do a batch process on lots of files. I have used Paint shop Pro since version 5 and love it but I might have to change to another editor if I cannot solve this one.
View 7 Replies
View Related
Nov 7, 2011
I open up either PSPX4 or PSPPX3 and the RAW photos start streaming in looking absolutely beautiful... and then one by one they darken-up and and bland out. This does not happen with my JPEG's. I can then edit them in the Adjust and Edit tabs to lighten them up. Makes me wonder if my codecs are messed up... however a complete reinstall of Win 7 64 bit has changed nothing.
Camera is Canon T2i
View 5 Replies
View Related
Nov 30, 2013
Now that I've upgraded to X6 64 bit, my windows 8 explorer does not show .pspimage thumbnails.
View 11 Replies
View Related
Dec 4, 2012
Win XP computer.
Previously ran PSP 9 and PSP X1. All was FINE with thumbnails in Windows Explorer.
Purchased and installed PSP X5
It seem to be doing some hatchet job on pspimage files that I've had stored for several YEARS on this computer. These are files I have NOT opened in X5.
They are showing up as icons for PSP X5 although they were created with earlier versions of the program.
I NEVER authorized any type of conversion. Why would I?
And how do I get the view back without having to install any other program since the view was FINE before installing X5?
View 9 Replies
View Related
Nov 15, 2011
When I create images for my web sites in X4, upload them into Expression Web, insert them into the page and use the thumbnail tool, the thumbnails appear badly pixelated, as though they were posterized. This did not happen when using PSP8. I save my images for the web as 72 DPI, uncompressed JPEGs. There must be something different about the images output from X4 and those output from PSP8. Image info doesn't show anything suspect.
View 3 Replies
View Related
Dec 27, 2013
I installed PSP X6 Ulitimate and when I first pulled it up I saw Instant Effects Thumbnails under the Adjust Tab. I experimented with a few then had to get off. When I reopened the program all the thumbnails were gone. No matter what I do I can't get the Instant Effects to show up in any of the tabs. Sometimes I'll scroll the mouse over the area, click it, and the photo will have one of the instant effects applied, e.g. black and white. That doesn't do me any good because I can't see what is being applied before clicking if the thumbnails aren't showing. how to get the instant effects to show back up?
View 4 Replies
View Related
Sep 7, 2012
I have used Adobe for a long time for processing a whole group of photographs at one time. I correct, signature to right or left, etc. I am just starting to use Paint.net and do like it, but need to be able to do bulk processing. below is my wed site .
View 2 Replies
View Related
Feb 3, 2011
I read that it has a batch feature, but i cant seem to find out how to use it or if it still exists in latest script lab version,
I intend to apply some settings to a series of images (say around 200)
View 1 Replies
View Related
Feb 13, 2014
I'm experimenting with a digital IR camera. The images are very "magenta" in color and everyone states to simply "swap the Red and Blue" color channels. How can this be done in Paint.net? Is there a plugin that would process IR color pictures?
View 5 Replies
View Related
Apr 11, 2013
Using 'PaintX6 64bit Win7
File - Batch Process - Add File - select several files (jpgs or tifs) - Open - Error....
Only first file added to list. Can continue to add files one at a time. Not really good for ,say , downsampling a list of hundreds of image.
View 4 Replies
View Related
Dec 24, 2011
Just came upon an error I had not seen before. Though PSP no longer supports Animation Shop, up until PSP X4, the user has been able to export frames back to PSP from Animation Shop. Now, this no longer works! There's still some communication there, because an error message - which, incidentally, makes absolutely no sense at all - is generated in PSP X4:
View 2 Replies
View Related
May 12, 2013
I'm trying to make thumbnails for video's for youtube. So my idea is that the nr 1 is on thumbnail 1, then on the thumbnail for the second video, it says 2, etc. But every time i have to delete the number and write a new one. Is there a way of doing that automatically? so that it just makes p.e. 10 thumbnails, with numbers from 1-10?
View 3 Replies
View Related
Mar 22, 2012
I posted a gallery, but having problems with inserting thumbnails to my post. i did read the pictorium posting tips, but none seem to work.
View 13 Replies
View Related
Oct 28, 2011
I installed PSP X4 today on a new PC with Windows 7 and noticed that it has no Animation Shop. Can I install Animation Shop to this machine? Will it work without PSP 9 or does it need certain dlls from PSP 9 ? I really want to be able to use Animation Shop again.
View 7 Replies
View Related
Oct 8, 2011
Any plug-in for making thumbnails from a folder?
I often need to take a CD of images (JPEG /TIFF / PNG etc.) for a website and I need to create thumbnails of each for a web gallery.
Typically I will see between 20 and 50 images at a time and it is very laborious to manually load into photopaint, resize, save-as with a tn_ prefix etc. and I was hoping for a way to automate this.
View 6 Replies
View Related
Sep 25, 2012
Is there a Print Layout in X5 similar to that in Paint Shop Pro?
View 1 Replies
View Related
Apr 9, 2011
My program worked just great, then all of a sudden the paint brush and eraser will not do a thing.
View 14 Replies
View Related
May 29, 2013
Why would psd thumbnails all of a sudden start not showing up as thumbnails, just as psd icons?
View 11 Replies
View Related
Aug 14, 2013
why custom made nibs thunbnails show as black dots in PhotoPaintx6? Also when I select one of them...it just sprays a dot instead of my image? I saw where others are having the same problem. Some are and some aren't. As long as I leave the custom made nibs loaded they display and spray correctly. If I load the default nibs or any other nibs then go back and load the custom nibs..that's when I get the black dots. I've remade my nibs several times thinking I did something wrong but that's not the problem.
Windows 7 64 bit, Intel Xeon 3.30GHz, 32GB memory, ATI FirePro V4800, (1)10,000 Velosirapptor internal HD, (1) internal 1TB HD, (1) 500GB external HD (2) external 3TB HDs, (2) HP z6200 printers, (1) OKI 9650 printer (1) Roland Camm1 Pro vinyl cutter
View 6 Replies
View Related
Aug 20, 2011
if is possible to create the paint drips in the attached design. I really want to learn how to create urban designs, is corel paint shop x3 suitable for that?
View 2 Replies
View Related
May 15, 2012
I want to use the paint brush for editing a photo I have, but the only color available is black. No matter where I've looked in PSP, there was no option to change the color of the paint brush. I've read online that you need to change the pallet to material pallet, then go to "Foreground & Stroke Properties" and set the color box to the color I want, but the only colors I get are different hues of black and gray.
Even in Paint it's just a matter of clicking the desired color to use different colors. Why isn't it so simple in PSP?
View 3 Replies
View Related
Oct 14, 2013
Ok, either I am totally loosing it, or it just ain't happening.
I cannot get the Nik HDR module to work with my PSP X5
It's installed, it shows up in my Effects menu, but it only imports one of the photos I have opened in my edit tab.
What am I missing??
View 1 Replies
View Related
Jan 30, 2012
Using PSPP X3 Ultimate.
I have some Tif files and jpeg files that are 600dpi and 400dpi. I scanned these images with my Canon CanoScan LiDE 700F scanner. Can i use my version of PSPP X3 Ultimate to change the dpi value? Is this stuck? I wanted to be able to get the 600 and 400 dpi image files (I have some 300dpi's too) down to the 100-250 range if I needed to. I see there are different export options and compression in PSPPX3Ultimate, but I'm not sure if this will do what I want.
I want to export as Tif and Jpeg again.
Are there any good third party photo and or video editors that I can batch edit this with? It's ok to mention pay programs and I'd prefer good quality freeware if there is such a thing. I am sure that my Corel program can do the trick though. I just don't know how and don't want to rescan multiple dpi's every single time. I only need the archives and then get the smaller dpi when needed.
View 2 Replies
View Related
Nov 2, 2012
I was using a trial version of paint shop pro x5 and still had 11 days left of my trial when it suddenly stopped working. When I click on the icon to start paint shop pro it starts up and then freezes every time when it is loading in the spot that says "initializing color swatches".
I haven't changed anything on my computer- it just suddenly stopped working. I uninstalled it and tried reinstalling it, I also tried restoring it.
View 3 Replies
View Related
Jun 26, 2011
I installed PaintShop Pro Ultimate X3 several months ago. It worked fine initially, but then stopped running and gave me an error message pertaining to a language error. In an effort to fix the problem, I have completely uninstalled the application and removed all of its registry entries. I then reinstalled the program, which appeared to be successful, however, now it simply will not run and gives no error message whatsoever. When you click the desktop icon, it tries to load momentarily, then does nothing more.
I have removed my virus protection and my User Account Control.
View 2 Replies
View Related
Jun 12, 2013
What is the best method to upgrade from X3 to X5...should I remove X3 first for example?
View 2 Replies
View Related
Oct 13, 2013
During preparing a collage, when I try to save the project, I receive the the message that I don't have enough memory.I am using windows 7 and as far as I know, I don't have memory problems. I am working a lot with VideoStudio x4 without any problems.
View 5 Replies
View Related
Jun 11, 2011
I would like to add some Plugins to PSPPX3, I read/understand i should add the Plug-ins path at Preferences>File Location>Plug-ins - But there is no such option or Preferences>Workspace>Plug-ins - Same story
There was also no Plug-ins map or Workspace map in: C:Program FilesCorelCorel PaintShop Photo ProX3PSPClassicLanguagesNL
I installed PSPPX3 today, and i updated it and downloaded patch 1-4. How / where to install plugins?
View 7 Replies
View Related
Sep 21, 2011
When I open a jpeg in X4 it always says it is at 72 dpi. Even when I resize it so it is at 220, when I open it again and look under image information it always says 72 dpi. If I open the same image in any other editor, including X3 it reports the correct dpi. This coupled with the extreme compression is making X4 useless to me unfortunately.
I'm not prepared to sit and do the math to try and figure out what it is really at.
I have reset the number under preferences/general program preferences/units and it doesn't respond to that either.
For me, this version is problematic and not worth taking the time to learn. I need to be able to depend on and trust the information I'm getting from my software.
View 14 Replies
View Related
Sep 19, 2011
I normally upgrade every other version. I currently use X2 on a Windows XP computer. My primary uses are photo editing. My key interests are:
- processing 16 bit per color files
- use of layers and blends
- stereo photography (combining and aligning stereo pairs)
- use of various tools such as cloning and healing.
- Color management and Printing
Reviewing the product page, I haven't really found anything that shows a list of upgraded or added features. Most of the things mentioned appear to be in X2 already. Looking at the thread calling for future features, it appears that the things missing are still missing. X2 is serving me well, but there has to be some reason to upgrade?
View 11 Replies
View Related
