I was checking XP Task Manager just now and noticed that although PSP8 isn't running as far as I'm concerned (there are no PSP8 windows open), its executable still appears in the task list.
[URL]
I recently bought PaintShop Pro Ultimate X5. So, the software is remain running in the background even when I quit the app. I must do CTRL-ALT-DEL and stop the process. Is it a bug? I think is it not normal
View 13 Replies View RelatedI have psp x3 and I created some simple scripts for example for high pass sharpening (or curves). Obviously these run silently. In one session I used the 'curves' script on 3 or 4 photos. The next time I used it it did not run silently but prompted me to set the values. So I restarted psp and its still prompting me. The 'high pass sharpening' also prompts me now instead of using the defaults. I also create new scripts which do not run silently. So, in short, no scripts run silently even if I specifically run them in silent mode.
View 1 Replies View RelatedAlthough Paint Shop Pro X4 runs the filters from Topaz Labs correctly on a single file, PSPX4 chokes when running the filters as part of a script in batch files. Not only was the program unable to apply the plug-ins correctly in a batch file, the errors were different depending on the plug-in.
I ran my tests on 8 JPG files with dimensions of 4021x3024 pix, file size averaging 2.8 MB. I then reduced the files to 800x600 pix dimensions and ran the same tests. Results were the same on both size groups. I recorded a script with only each Topaz filter, then tested the script on a single image. The script worked. The problems occurred when run in batch processing. I tested against another company's plug-in, running Alien Skin's Xenofex 2 Burnt Edges in a batch file with script on the 8 images with no problem. I also tested the same Topaz Labs filters in PhotoLine 16, recording and playing actions. The plug-ins ran perfectly in PhotoLine.
When batch processing was run in PSPX4, it was run with the test script selected and silent mode selected. Silent mode means the script should run from start to finish with no intervention by the user. Here's what happened in my tests.
Topaz Adjust 4 - Batch file runs correctly through 4 images, then the process freezes. The Windows Task Manager shows PSPX4 to be "running."
Topaz Detail 2 - Batch file runs correctly through 4 images, then the process freezes. The Windows Task Manager shows PSPX4 to be "running."
Topoaz Clean 3 - Batch file runs, but Topaz window opens on each file, requiring user selection before progressing to next file. However, the process freezes after the fourth image. The Windows Task Manager shows PSPX4 to be "running."
Topaz InFocus - Batch file runs, but Topaz window opens on each file, requiring user selection before progressing to next file. However, the process freezes after the fourth image. The Windows Task Manager shows PSPX4 to be "running."
Topaz Lens Effects - Batch file runs, but Topaz window opens on each file, requiring user selection before progressing to next file. However, the process freezes after the fourth image. The Windows Task Manager shows PSPX4 to be "running."
Topaz DeNoise 5 - Batch file runs for all 8 files, however Topaz window opens on each file, requiring user selection.
I have just installed PSP X5 and have found a couple of problems.
First one is when I close PSP the process still runs for a good 10 minutes afterwards and consumes a lot of system memory. I found this by accident after I closed PSP X5 and then decided to start it again. It wouldn't open until I closed the previous process.
Second, when I start PSP after the splash screen and the program interface appear I have to wait about 1 minute 40 seconds before I can do anything with the program.
how to improve this situation because at the moment I don't consider this acceptable?
I'm running Windows 7 32 bit with 4Gb of RAM, other than browser and email no other big program is running inthe background
I am running Win 7 64bit Pro with several users defined on a PC. PSP X4 runs OK for my user, but all other users cannot start PSP X4 they get a message Temp Directory not defined. The Temp Directory is defined and valid with write permissions.
Windows is installed on C: drive, but User directories are on E: Drive
PSP X4 version 14.3.0.3
I have reviewed a post for a similar issue, but this does not apply for my issue viewtopic.php?f=56&t=39832&p=208741&hilit=temp+directory+not+defined
I have even tried copying the corel hive of HKCUSoftwareCorel from my user and "DocumentsCorel Paintshop Pro" directory to the other user, but still get the temp directory is not defined message
So basically although PSP X4 is running for one user on the PC, none of the other users can start it to run for the first time
I followed the hint of PSP X4 to search the "List of supported RAW formats" on the Corel website. I only find a list for PSP X3 and in this list my camera (a Panasonic Lumix GH-2) isn't listed. Is there any newer list of supported RAW-formats / camera-types and if not, is the GH-2 supported and is there any lens specific correction data in X4 to auto correct the raw files?
View 1 Replies View RelatedRunning on XP pro SP3, all updates.
I purchased and installed PSP X4 ultimate (14.0.0.332), having first removed all traces of previous versions.
Install went fine and everything I've tried so far works as expected but I found one minor, if irritating bug:
I had retained in My PSP files a number of picture tubes, some of which, it turned out, were duplicates of those provided in PSP X4 and the Ultimate contents pack. So when I first checked the picture tubes, the usual window popped up listing the duplicates it had found, with the button to copy the list to the clipboard. However clicking on that button, the only thing that was copied to the clipboard was the first letter of the first entry in the list, not the whole list, as worked properly in X3 and earlier.
I then manually searched for and deleted the duplicates (which a copy of the list would have made much less time consuming, of course). To test that this was a reproducible bug, I then deliberately crated a new set of duplicates (simply by copying one of the subfolders in C:Program FilesCorelCorel PaintShop Pro X4Corel_10 to a subfolder in My PSP files picture tubes folder). Again the list of new duplicates showed up, but clicking copy to clipboard again only the first letter in the first item on the list was copied.
The "recent" file list when I right-click the AutoCAD icon in my task bar only lists .dxf files. No .dwg files show up. Is there any way for me to change this so that my recent .dwg files will be listed?
View 7 Replies View RelatedEvery time I launch Paint Shop Pro X5 my recent file list is empty. I thought the program was supposed to remember the last four images that were opened. I then have to select File > Open but now the program defaults to a folder called My Pictures. I store my images in my own folder elsewhere. I would like to set my folder to be the default folder. I have to navigate to my folder ever time I launch the tool. If I go to File > Preferences, I do not see a place where I can change the setting.
View 4 Replies View Relatedwhy my lines are thick when I zoom in on screen yet they become "normal when zoomed out" seams to me that lineweighs are being displayed on screen, a variable setting perhaps?
View 3 Replies View RelatedJust came upon an error I had not seen before. Though PSP no longer supports Animation Shop, up until PSP X4, the user has been able to export frames back to PSP from Animation Shop. Now, this no longer works! There's still some communication there, because an error message - which, incidentally, makes absolutely no sense at all - is generated in PSP X4:
View 2 Replies View RelatedI installed PSP X4 today on a new PC with Windows 7 and noticed that it has no Animation Shop. Can I install Animation Shop to this machine? Will it work without PSP 9 or does it need certain dlls from PSP 9 ? I really want to be able to use Animation Shop again.
View 7 Replies View RelatedIs there a Print Layout in X5 similar to that in Paint Shop Pro?
View 1 Replies View RelatedMy program worked just great, then all of a sudden the paint brush and eraser will not do a thing.
View 14 Replies View Relatedif is possible to create the paint drips in the attached design. I really want to learn how to create urban designs, is corel paint shop x3 suitable for that?
View 2 Replies View RelatedI want to use the paint brush for editing a photo I have, but the only color available is black. No matter where I've looked in PSP, there was no option to change the color of the paint brush. I've read online that you need to change the pallet to material pallet, then go to "Foreground & Stroke Properties" and set the color box to the color I want, but the only colors I get are different hues of black and gray.
Even in Paint it's just a matter of clicking the desired color to use different colors. Why isn't it so simple in PSP?
How can I go to see next image from the folder list in situatiom when I opened some picture, and looking at it? There is no arow for "next image"? As i see, I must open all pictures from sam folder, and then I can use ctrl-tab to go to see any picture from the folder list.
View 7 Replies View RelatedI have paint.net 3.5.10 can I add new fonts to the list and if yes how do I do this
View 2 Replies View RelatedIs there a list of all the Simon Brown's mini-brushes created in PDN or do we need to go to the original post in plug-ins or beginner tutorials?
What I was thinking of doing (if there isn't a detailed list) is creating a list of all the brushes in alphabetical order and showing examples of each effect of the brushes. It would make it a lot more easier I think.
This is probably a frequently asked question, but doing some searching turned up nothing. I have Paint.net on one computer, and I'm setting it up on another. Is there a way of getting a list of all the plugins I've installed on the previous one, so I can install them on the new one? In poking around, I haven't been able to find a thing that lists all the extras I've installed.
View 3 Replies View RelatedI have two images in what I call the work tray at the top of Paint. How can I merge them? Or ad one to one of the layers of the other?
View 14 Replies View Relatedwould it be possible sometime in Paint.Net to save/export to the clipboard the history box as a text list of what we did ?
since I use many effects and settings in a given PDN, I sometime wants to write me some notes about how i did something and the steps i used to do it, before my old memory lets me down.
I know that the PDN it self has the history, but now I need to go over all the list and manually write/type down in notepad the list , which most of the time is very long.
Having the ability to save/export the history box text to a file or to the clipboard, make it easy to edit the list and keep track/notes of steps and ways to do something.
I don't need the settings used in the effect/adjustments , but just the TEXT names of the steps taken as shown in the history box.
Ok, either I am totally loosing it, or it just ain't happening.
I cannot get the Nik HDR module to work with my PSP X5
It's installed, it shows up in my Effects menu, but it only imports one of the photos I have opened in my edit tab.
What am I missing??
Using PSPP X3 Ultimate.
I have some Tif files and jpeg files that are 600dpi and 400dpi. I scanned these images with my Canon CanoScan LiDE 700F scanner. Can i use my version of PSPP X3 Ultimate to change the dpi value? Is this stuck? I wanted to be able to get the 600 and 400 dpi image files (I have some 300dpi's too) down to the 100-250 range if I needed to. I see there are different export options and compression in PSPPX3Ultimate, but I'm not sure if this will do what I want.
I want to export as Tif and Jpeg again.
Are there any good third party photo and or video editors that I can batch edit this with? It's ok to mention pay programs and I'd prefer good quality freeware if there is such a thing. I am sure that my Corel program can do the trick though. I just don't know how and don't want to rescan multiple dpi's every single time. I only need the archives and then get the smaller dpi when needed.
I was using a trial version of paint shop pro x5 and still had 11 days left of my trial when it suddenly stopped working. When I click on the icon to start paint shop pro it starts up and then freezes every time when it is loading in the spot that says "initializing color swatches".
I haven't changed anything on my computer- it just suddenly stopped working. I uninstalled it and tried reinstalling it, I also tried restoring it.
I installed PaintShop Pro Ultimate X3 several months ago. It worked fine initially, but then stopped running and gave me an error message pertaining to a language error. In an effort to fix the problem, I have completely uninstalled the application and removed all of its registry entries. I then reinstalled the program, which appeared to be successful, however, now it simply will not run and gives no error message whatsoever. When you click the desktop icon, it tries to load momentarily, then does nothing more.
I have removed my virus protection and my User Account Control.
What is the best method to upgrade from X3 to X5...should I remove X3 first for example?
View 2 Replies View RelatedDuring preparing a collage, when I try to save the project, I receive the the message that I don't have enough memory.I am using windows 7 and as far as I know, I don't have memory problems. I am working a lot with VideoStudio x4 without any problems.
View 5 Replies View RelatedI would like to add some Plugins to PSPPX3, I read/understand i should add the Plug-ins path at Preferences>File Location>Plug-ins - But there is no such option or Preferences>Workspace>Plug-ins - Same story
There was also no Plug-ins map or Workspace map in: C:Program FilesCorelCorel PaintShop Photo ProX3PSPClassicLanguagesNL
I installed PSPPX3 today, and i updated it and downloaded patch 1-4. How / where to install plugins?
When I open a jpeg in X4 it always says it is at 72 dpi. Even when I resize it so it is at 220, when I open it again and look under image information it always says 72 dpi. If I open the same image in any other editor, including X3 it reports the correct dpi. This coupled with the extreme compression is making X4 useless to me unfortunately.
I'm not prepared to sit and do the math to try and figure out what it is really at.
I have reset the number under preferences/general program preferences/units and it doesn't respond to that either.
For me, this version is problematic and not worth taking the time to learn. I need to be able to depend on and trust the information I'm getting from my software.
