The "recent" file list when I right-click the AutoCAD icon in my task bar only lists .dxf files. No .dwg files show up. Is there any way for me to change this so that my recent .dwg files will be listed?
View 7 RepliesI am in ACAD 2012 and want to delete sheet sets from my "recent" list. Many of them are invalid now. How can I do this? I would expect it is a registry entry but I don't know where.
View 2 Replies View RelatedAttached is a zip file with a standalone program to aid in cleaning up the Recent Documents list for all flavors of AutoCAD, 2009-2013.
It's pretty self explanatory, just be sure to run it with no sessions of AutoCAD, or vertical products, running. It should refuse to run if it sees any Acad.exe application in the running tasks list. Once the dialog opens it will show you all of the Autocad related products you have installed, select one and it will fill in the first list of recent documents. Then select a profile for that product and the second list will populate with the SSM related recent documents saved for that profile. You can then select any item from either list, if the same DST filename exists in both lists it will automatically select them both. Use the standard selection methods to select more than one (shift-click, control-click, window).
Be sure to Unblock, if needed, the zip file before extracting the exe file. (Check the file properties)
Two of my users' 2013 Civil 3D's Sheet Set Manager does not show anything in the Recent list even though they have opened a few sheet sets and have worked on drawings from those sheet sets. In other words, they pick on the SSM > Open > and hover on Recent and nothing shows up. Once some sheet sets have been opened, the Recent list does populate during that AutoCAD session, but once AutoCAD is closed, the SSM > Open > Recent list does not populate. Mine works fine and we are using the same profiles.
View 2 Replies View RelatedFrom the inventor file menu how to get an in correct recent files list? I get a list that i never worked on. When I carefully take a look, it shows a combination of couple files i worked on and a many files that my colleagues worked on.The tool tip shows it reading from c: empxxxx
View 1 Replies View RelatedAny way to remove the .dst listings in the "Recent Documents" list on the "File" pulldown? We use Civil 3D mostly with dwg files and they are usually pushed off the list because of Sheet Set Manager files. Some of these dst's haven't been opened in weeks? But there still at the top of the list....very unproductive when you have to go searching for a dwg file you were just working on.....
Civil 3D 2012
Windows 7 Pro (64bit)
Intel Xeon W5580 @3.20GHz
12gig RAM
NVIDIA Quadro 600
I was checking XP Task Manager just now and noticed that although PSP8 isn't running as far as I'm concerned (there are no PSP8 windows open), its executable still appears in the task list.
[URL]
The recent files are not listed in the welcome dialog box or under file menu recent files drop down list? How I can get it to list again?
View 1 Replies View RelatedWhere do you edit the paths of the recent files in the welcome screen for Mudbox (2013 SP3) ?
View 3 Replies View RelatedAfter a rather horrendous incident with trying to do a series of videos all in one project using bins and shared media and a savefile that got *WAYYY* out of hand (20 minutes to load the file)- which I believe was tied to importing media from another .proj file, I have switched to a more modular approach with anywhere from 2-5 projects in each project and now a collection of around 15-25 projects on the go. Most of these are "work on a chapter, then change to another project while waiting for footage for another project" and several of them share pieces including multicam segments and sync'd audio.
Rather than importing from another project, I am using Control-C, switch to a different project file, then paste in. This isn't the most "Adobe Professional" style way of doing things, but considering that I lost several hours to trying to recover from the last project, even when I only needed to spend 20 minutes pumping out a rough cut, I'm not going back to that method until my next computer upgrade and until I begrudgingly switch to CC in around 1-1.5 year's time.
So the issue that I'm faced with is that I'm often using the Open Recent Project flyout and having 5 projects on that list is just not enough to be remotely useful.
In MS Office, the list is quite long and even in photoshop, I can get 10. That's enough for my Photoshop, but I switch projects using the Recent Projects list in Premiere a LOT more often. I could just use my explorer windows to jump around, but given that I have 5-6 explorer windows open per project most of which are folders crammed with footage, PSD stills and peak files, plus other non-video things I'm working on right now, that's really not the simplest way to navigate at a glance.
How can I get 10, 20 or 25 items in that flyout list instead of mucking about with 5? I run Adobe Production Premium CS6.
I have a friend using Lightroom 3 on a Windows 7 PC. She uses multiple catalogs. (one for each client) as do I. Now when she launches LR the list of recent catalogs is empty. Could this be cleared some where? Why do they not show up and will they start showing up again after she opens different catalogs?
View 2 Replies View RelatedMany times the file I would like to open was the sixth or seventh. how to enlarge the Recent Files list to be say 10 in CD X4 and PP X4?
View 6 Replies View RelatedEvery time I launch Paint Shop Pro X5 my recent file list is empty. I thought the program was supposed to remember the last four images that were opened. I then have to select File > Open but now the program defaults to a folder called My Pictures. I store my images in my own folder elsewhere. I would like to set my folder to be the default folder. I have to navigate to my folder ever time I launch the tool. If I go to File > Preferences, I do not see a place where I can change the setting.
View 4 Replies View RelatedIt strikes me that there should be an easy way to do this, but it eludes me at the moment. I've used "Connect to Data" to attach a .shp file export from another software, specifically a Windmill computer model. The geometry and data comes through, but the table contains no coordinates, which is what my vendor wants. The drawing overlay's georeference info very closely (within our tolerances) and the Coordinate System is set.
How to suck that coordinate info off the drawing without spending a week clicking on each of 8600 points and typing LIST?
I have to list all object data on some 4000 drawings. The drawings have been created in an unkown version of autocad and are electrical in nature. It would be great if a LISP file could be created to extract all of this too individual Excel or text files.
View 1 Replies View RelatedHaving no success in getting my .ctb file from 2007 to show in list in 2011. Is it compatible or will I have to re-write?
View 2 Replies View RelatedWhen I click File the drop down menue at the bottom has five entries for recent jobs. The most current is a file I worked on three or four days ago. How do you make Corel remember what was the last job opened?
View 1 Replies View RelatedIf I open a drawing created in 2009 and try to publish it in 2010, DSD file message pops saying about unsaved changes (see attached). Since I don't use sheet sets, I do not have any use for DSD file. Is there a way to disable it?
In 2009 it was simple not to include model tab while publishing. Where is this option in 2010? I don't want to remove model tab from the list every time I publish drawings.
How to remove all the files on the “recent document”?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I am batch publishing .idw files to .dwf and the default file name that it creates is XXXXX.idw.dxf. how to remove the .idw? Is there is setting in Task Scheduler that can be changed?
View 1 Replies View RelatedWhen I am in the Autodesk 2013 Task Scheduler and I click on the log file path to view the log file..... I get the log file, but it also opens the "View Downloads" window.. which I dont want.
It just started this in 2013 and it does it on every computer that I have tried it on.
Is there a way to make it not open the "View Downloads" when I view the log file?
I'm looking for a way to be able to get the latest .ctb files and tool palettes, weekly automatically,almost like task scheduled in inventor, so when the .ctb of palettes gets updated, the users get it automatically,
tried inventor task schedular, by getting the latest folder, but the file types is not supported.
I just created and ran a migrate task using the Autodesk Task Scheduler. I selected several folders and migrated the files from Vault. When the task completed, there were several files that failed. The majority of them had "---Failed at Child" in the log.
Just to see what the problem was, I did a get latest on several of these that failed and then opened them in Inventor. They all opened just fine without any errors at all.
I am also seeing some entries like "xyz.ipt in 12345.iam -- File does not exist. When I opened the iam after the task was complete, there was no errors and it found the xyz.ipt file.
Question is, why does the task scheduler report these in the log, when there is nothing wrong with the files?
I tried to use 2012 task scheduler to migrate files, got an error message saying it won't support vault project file. I used vault project file for version 2010.
View 1 Replies View RelatedHow to I simplify the list of file types in the Save-As file type list? I use less than six file types. I have no need for most of these. It would be nice to have my top 5 and then the ability to go off-menu if needed for others.
View 6 Replies View RelatedIs there a way to modify the DEFAULT SCALE LIST to show a metric scale list in an imperial template? I mean, I start a drawing using the imperial template, but i want to use the standard metric scales on paper space. on previous versions the scale list shown both imperial & metric. Now it depends of what the template is using.
View 1 Replies View RelatedAS3: In component list my icon and label text are not align properly, when app is started, label text is over icon and when I put mouse pointer over any item in the list then alignment it's ok.
This is when I test flash app: And when I put mouse pointer over any item, alignment of icon and label is ok! Here is code:
stop();
import fl.controls.listClasses.CellRenderer;
import flash.text.TextFormat;
import fl.controls.List;
import fl.controls.Slider;
import fl.events.SliderEvent;
import fl.controls.List;
[code]....
Just started having an issue with PS CS6 crashing each time I try to save a file, I've scoured multiple forums, re installed, checked fonts library.
View 16 Replies View RelatedI've just started a new job, and I'm on a PC with CS6. (I'm used to Mac, CS5)
I can't seem to get 'open recent file' to work in any of my CS6 programes It is always greyed out and never remembers what I've last done. Does it have something to do with the files being stored on a passworded server?
When selecting objects in AutoCAD a 3d style USC icon shows up on the object about the centerpoint of the object or objects.
View 5 Replies View RelatedThe AutoCAD video tutorials on the site such as "AutoCAD 2010_ 01 Getting Ready for 3D" show a 3D UCS icon which has some nice arrows at the end of each axis, this looks similar to the icon in Solidworks.
Has there been some change in design to this icon from 2010 to 2014? The UCS 3D icon in the version 2014 that i'm running does not have these arrows and if I can find a setting to have it display in this way, it certainly doesn't show up in any of the visual styles e.g. xray, conceptual or realistic. I've not found any info anywhere documenting the change, if any.
Here is a pic from the above mentioned video tutorial with arrows on UCS:
Here is a pic from 2013-2014 UCS with no arrows.