I want to create DDS images with custom mipmaps only using Paint.net. This could be done by using layers in a similar way to how animated images can be made. For example, we have a 512x512 image, then we import an image half that size with whatever we want the next mipmap to be as a separate layer. Then we have a 256x256 texture in the top right corner of the image while still retaining the 512x512 canvas size.
View 3 Replies
Paint.net can open DDS files, but looses any mipmaps if they existing. Also here is no possibility to generate mipmaps and save texture with them.
I can't find any plugin with such a functionality. Are any plans for realize DDS support with mipmaps?
I am trying to create a custom image that I will later use to crop my pictures to that shape. I have been search the web and can't seem to find how to do that with Photoshop Elements 10.
View 1 Replies View Relatedi wonder, if there is a way to use mipmaps in softimage? using tiled open exr files or equivalent??
View 6 Replies View RelatedI use Paint.Net a lot to create images for Word. So I save in .jpg org .png. And everytime I save my work (which contains layers), Paint.Net asks if I want to flatten it.
Add an "Remeber my selection" check-box, or auto-flatten the image. I think, after seeing that dialog-box for 100x times, you know that there will be no layers afterwards.
Alternatively, you could add a command "Save As Copy..." which doesn't ask for flattening, and will not change the currently active image. (This solution would not require you internally keep track of the user choices.)
I'm searching for a plug in to create a dynamic .gif image where i can add diferent images in that switch after 0,4 seconds ore something..
View 1 Replies View RelatedPSPro X. Any easiest way to compose an image comprised of 2 imported pictures.I want to have an image made up from 2 jpeg photos and have the two alongside each other, ie one of the bride on the left side and one of the groom taking up the other half of the finished image on the right side.
View 10 Replies View RelatedI am trying create a flash animation where two images bump into each other and get squished on the ends that make contact.
How can I take an image and squish an end so it distorts up and down like it is being being pushed upon?
Is it possible to use paint.net to combine 3 different jpeg image to create a collage jpeg?
View 1 Replies View Relatedhow to take a photo or image, create multiple images to print and when cut out, will create a complete image when painted. Similar to how its done in photo shop only, I'd like to zoom in to areas, trace out the areas, then take those selected areas that I traced and move them to a different layer. Is this possible?
View 1 Replies View RelatedI downloaded Paint.net to resize pics, images, or logos and to create window stickers. However, I am completely new to it all! After playing with it and using it for a few days, I've done a few things with gradients paintbrush and text.
1)When I am placing graphics AND text on a new creation, for some reason I can only add the text FIRST and not AFTER I add any graphics. (So, if I mess up after getting my graphics on there and realize I need my text moved, I gotta start ALL over!
2) Is there any instruction book on the program out there anywhere??? anywhere??? maybe a Paint.net book for Dummies???
3) How do I resize photo's?? How do I work with layers?
4) WHERE is the align tool? (or align object tool.....whatever it's called) I need a simple way to CENTER text and pics.....
The program has been useful to me from what I have learned by hitting the wrong buttons by mistake (lol) but I'm sure there are MUCH better ways to do things than what I've been doing......
I have 2 separate image files and wish to create one new image file comprised of the two initial images on the left and right. Is that possible (and novice practical) with the software?
View 5 Replies View RelatedMy ultimate goal is to have a virtual human model that I can re-size parametrically to reflect real-world measurements. I've used MAX to make architectural models and scenes so I know how to manipulate basic shapes in MAX.
how to make some sort of basic-custom geometric shape and control that shape parametrically, like the built-in "Box", "Sphere" and "Cylinder" objects.
I'm trying to figure out how to create an iLogic rule that would create a Custom iProperties and put in what version of Inventor the file was last updated with.
View 8 Replies View Relatedhow can i cut images using custom shapes?
View 2 Replies View RelatedIs there a way to create custom LUT without going to other software? How did Chris Cox create them? Is there a PS script out there that I can use?
View 5 Replies View RelatedI am trying to create a custom detail line, if possible?
Is there any way to create a custom detail line which will be a dashed line (similar to Hidden) as well as containing arrows every "X" feet or inches. i am attaching an image that is what i would like to create so i don't draw from scratch.
I would like for it to function as a line, spline, shape, whatever the needs may be.
Is there a way to create a custom fascia in Revit Architecture 2012? I am trying to create a 3/4" thick metal panel on 3-5/8" metal stud that is 2'-6" tall.
View 1 Replies View Related if theres a tool to create a custom made primitive such as an ipad or desktop screen out of particles?
Because its apart of my idea for a motion graphic project.
1) I'm trying to do is to create an ellipse that has less steep curves at its corners (essentially making it a little more rectangular). I realize that if you create an ellipse, then use the direction tool, you can pull on the guidelines to make the curves less steep and achieve the affect I want. However, I was wondering, is there a feature when I can just enter in an amount and it will adjust all four corners to that amount without me having to fineagle with the direction tool?
2) Is it possible to create my own custom type of elipse where when I use the ellipse tool, and drag it out to make an elipse, it will already have these corners that I'd like?
When I was using an older Photoshop version ...I could select "print with preview" and there I could adjust the size and proportion of the image to the paper size - I would see the paper in a preview box and could adjust the image by sliding the box at the corner points and size the image any way I wanted ... and could see the actual preview of how the image could fit on the paper .... in Elements 11 - even if I do a PDF and print in Preview- there's no way I can see to do that ... I only see options for set sizes- even under the custom sizing menu ... I'm using exactly the same printer that I used with Photoshop - so I'm assuming this is a limitation with Elements ... I don't even see the option in Elements printing to change the image percentage as I've been used to with any other page setup before ....
View 4 Replies View Relatedhow I would go about changing a cars colour.
how I would go about making it so I could somehow put a pattern on the car, say zebra sripes, and make it look like a paint job?
I recently ran across some nice textures on the Brusheezy site, which then led me to google whether or not I could add these textures to my PDN. What I found was a custom texture .dll listed at this site [URL]...... that says it will allow the loading of PS textures in to PDN. Does it work, and do those of you who created and run PDN recommend using it?
View 2 Replies View Related, I have CS5, and a Sigma 15 - 50 lens.
If I want to apply lens correction in ACR thgere is a dropdown list of lenses, but my lens isn't included. presumably because it has been superceded by the 12 - 24.
So, is it possible to create a custom profile for this lens and save it for future use? if so how do I do this?
I'm wanting to load a png file into photoshop & use a customised menu bar or perhaps a plugin to supply some specific image information as I work. The image is a game height-map. The pixel hex value represents the height of the terrain.
I wanting to load my map (image) into PS & display a new menu bar containing this information in textboxes & the like:
1. The hex value of the pixel the mouse is hovering over.
2. The corresponding height related to that hex value. This would be a customised calcuated field (textbox).
3. A combo or spinbox with height values, so that you would select the desired height to pain onto the map, and the pain fill tool would automatically select the corresponding color to pain based on custom calculated conversion of height to correcponsing hex (color) value.
Do I need to write a plugin? or maybe ctionscript with a custom toolbar?
Just look at this image :
[URL]..........
I want to create similar effect using glass / distort filter but can't achieve it somehow co'z that filter doesn't allow you to add glass with custom shapes or horizontal / vertical.
I have been trying to research how to create a custom surface. I found this article [URL]...... about how to to create a surface from a jpeg. The article says to "expand color on the top left." of the style editor. However, when I open the dialogue there is no "color" that can be expanded. The only thing in the top left of dialogue box is "lighting." Is there another step that the article misses, or is there another way for me to create a surface from a jpeg?
View 2 Replies View RelatedHow do I create a new custom toolbar?
View 2 Replies View Relatedhow can i create custom report ?
View 7 Replies View RelatedI'm trying to create a custom floor tile but having issues doing it. 1st I create a generic 12' create floor, then use that floor to create a subfloor to try to create a tiled floor that is offset 1/4" from the initial floor. I select the floor, click edit material, select ceramic tile,.. get to the graphics property, select surface pattern and select 12" tile, click done, then OK but ... nothing happens.
I would also like to customize a pattern. I would like to create a patter that uses a 12"X12" tile with (2) 5 7/8"X5 7/8" tiles.
I tried to use the *.PAT technique but finding it difficult to do what I want so I found the hatch22 but still find that rather difficult.
I want to create an custom parameter like "button" under my object parameters or in attribute holder and i want this button run a simple code/script for me.
for example: linking Box1 to Box2
$.parent = $Box002
I know how to work with "wire parameter" and "parameter editor" but the problem is that i cant find any way to tell them to run this script with that parameter.
