Mudbox :: Linux Version Freezes At 99% When Generate Maps And Shows Tangents Calculating
May 20, 2012
Mudbox 2012 SP3/2013 SP2 Linux version freezes at 99% when generate maps and shows Tangents calculating ...
Not sure about Windows version but Linux versions (2012/2013) on my computer have this issue. The actually maps can be generated even it freezes at 99% and shows Tangents calculating... However, it is very annoying because I have to force Mudbox to quit everytime at this step.I even tested with a simple tube in Maya and brought it into Mudbox for testing. It gave me the same result and froze at 99%.
I encountered one problem with mudbox.I have finished sculpting and texturing my high-res model, but after extracting the texture maps, I realised there are some overlapping issues in my uvw map.
so i modified the uvw map back in 3ds max, exported the model, and import the new uvw map into mudbox. Due to the modification of the uvw map, the texture maps kind of screwed up on the model as they are not aligned to the new uvw map. I figure there might be a way to store the texture map information on the model into some place, then get it to reapply onto the model after i reimport the new uvw map.
I have a problem when I extract the normal map of mudbox. I see on the result a degraded in the normal, then when i put on 3d max i see a shadow degraded... Maybe i have bad parameters in normal maps extractor. extract the normal map on mudbox where resolve this problems.
We're experiencing some artefacts near UV seams on our baked displacement maps. We have a clean, multiple UV-tile model which is subdivided, sculpted etc. Baking uses subdivision method, smooth target mesh and UVs on (we render with prman). Edge bleed is default 2, anti aliasing to x2.
Then test the map out by bringing the target model back in, subdivide up to the corresponding level, and sculpt using maps. The artefacts are not everywhere, just on some UV boundaries in some areas, very strange. The UV boundaries are clean quads, same spacing, good use of UV space. My concern is its in sporadic regions, and not globally over all seams.
Like many other users on these boards, I am unable to complete a full backup of a particular catalog on my machine using PSE 11 (or PSE 10 for that matter). I have four catalogs on this machine and three of the four complete the full backup process without any problems. That last, non-cooperating, catalog is much larger (7,389 photographs) than the others, but I do not think that this would pose a problem.
I have removed all videos, audios, projects, PDFs, and audio captions (in other words, all media types other than photographs) from the catalog. The only files remaining are photographs (that is, JPG files). I attempt to complete a full backup and, when calculating the total media size, the PSE 11 application freezes at five to six percent. I have attempted this in PSE 10 as well, but with the same results.
The only other item of note is this, when I search for the various media types, I see the message "no media to be displayed" in the middle of the organizer window. However, when I search for video, I do not see the message--the organizer window is blank (no text message as seen for the other media types).
Lastly, I have reconnected all missing files. (None.) Optimized the catalog. Fixed errors in the catalog anyway. (None.)
how I can complete a full backup of this catalog? A large cash reward awaits.
How do I generate a table that shows cut and fill quantities for comparing two surfaces similar to that what shows up in the panorama window. I am not working on a road project with an alignment.
Suddenly my CS2 has started to act up. First, after opening a file and start to do a background erasing, the brush shows up as crosshairs.
after a brief time of working with those limitations, when I click on the downdown menus, they get highlighted, but nothing drops down. If I try to close the file or the program, all I get is a warning "ding".
after upgrading to version 14.1 CC, Photoshop shows several CMD windows during load. It stops on the third one, showing this:
Finally, a pop-up error windows says clc.exe stopped working (you can see that on the photo). I'm running on Windows 7, 64 bit.
The crash message reports this:
Firma con problemas: Nombre del evento de problema: APPCRASH Nombre de la aplicación: clc.exe Versión de la aplicación: 0.0.0.0 Marca de tiempo de la aplicación: 4c5cc9f6 Nombre del módulo con errores: clc.exe Versión del módulo con errores: 0.0.0.0 Marca de tiempo del módulo con errores: 4c5cc9f6 Código de excepción: c0000005 Desplazamiento de excepción: 000000000000a620 Versión del sistema operativo: 6.1.7601.2.1.0.768.3 Id. de configuración regional: 2058 Información adicional 1: e945 Información adicional 2: e9453ece61423ab98d0ee5bd40bdd8d2 Información adicional 3: be9a Información adicional 4: be9a4f994c98c3a8aa1b5294bf419e15
Everything worked just fine before the update. Problems started right after upgrading.
I am using a competitor product for video editing and now I am looking for a new product since the support there was really bad. I tried the testversion of Videostudio X4 and downloaded the recommended file from the website which is the german version. I installed it on a XP 32 Bit machine and also on a Vista Ultimate 32 Bit machine.
In both cases the first dialogs (welcome and registration) after running the program are in Chinese language. Now, the problems are:
- Although I can translate the contents by google translator I do not register the program in this case. I don't know what is comming up after that.
- The Corel support does not do anything when you don't specify a registered product.
When I try to use the brush tool when in Actions, an outlined version of my watermark shows up on my image instead of the brush applying the Action. I do not know what I did but it is super frustrating... how do I remove?
I would like to know if I can import my AutoCAD 3d file into 3DS MAX, with the lighting maps and material maps intact. This is because I am doing my thesis on AutoCAD 2011 but I would like to use 3DS Max to do a walk through video.
i have no problems installing new brushes when using windows, you simply extract the brushes in the brushes folder of course I am doing exactly the same thing with my linux machine but I cant seem to get the brushes when i restart Gimp in linux. I even tried extracting the brushes in a couple of other folders within the Gimp/brushes folder. Still they fail to appear ?
We are using Autodesk Inventor for our 3D modelling and we are working together with a group of scientists.
Those people would like to see our models, rotate them, take measurements, change the visibility of parts or subassemblies and maybe even make cross sections.
It works quite well with the Design Review program, but unfortunately our scientists mostly use Mac OS or Linux. Running Design Review under a windows emulation is not an option for our big models.
Easiest way to restore a Smoke Linux archive using Smoke on Mac 2012. The archive was saved to an external USB drive that I assume is Linux Ext-2 or Ext-3.
Mounting the drive on the Mac is the challenge. I've read that using an open source program like MacFuse may be an option. Does Autodesk provide a Mac utility for doing this?
It was working fine. Then I just did a simple command (pattern a part) and the entire workspace blinked out. The first time it happened I hit UNDO and it was back. So I got out of the drawing and got back in and tried the pattern again. Same issue but this time when I hit UNDO it would not come back. I closed the file without saving and when I went back in the file the workspace is still nothing but white screen. In the browser everything is still visible except for those that I had already changed to invisible. I tried making an invisible to visible and nothing happened. I got out and tried opening the "old version" which should've been before any of this happened and it is also blank. I can go to an ipt or iam in the browser and hit open and it will open in another screen just fine. I just can't see my main assembly. I have Inventor 2012. It shows no errors or messages. I have even rebooted.
I looked thru the forum and found a past issue back in 2005 identical. I tried doing Find in Window on an item in the browser but for some reason that option is not even in the list when I right click.
I would like to connect a Map3D drawing to a PostgreSQL/PostGIS database hosted on a linux server on my network. In the past I have successfully connected to PostgreSQL/PostGIS when the server/db is running on the same Windows box where I am using AutoCAD. I've been able to do this with several combinations of Windows (XP/7/7x64)/PostgreSQL(8.4/9.1)/PostGIS (1.5/2.0) and AutoCAD Map (2013).
I have even been able to connect from one Windows PC running AutoCAD Map to a PostGIS database hosted on another Windows machine on the network, but not to a database hosted by a Linux server. When I try this from an XP workstation, the application (ACAD) immediately crashes without warning (this happens after I enter the connection information and try to "login"). On Windows 7, the application crash is almost as immediate, but it at least gives me an exit code error "FATAL ERROR: Unhandled e06d7363h Exception at..."
I've tried to view the postgres logs on the db server. I usually get one of these for each failure:
2013-05-31 10:53:42 EDT LOG: could not accept SSL connection: Connection reset by peer
I've tweaked the postgres file (pg_hba.conf) to allow non-ssl/ssl/etc to make sure that I don't have problems there. In fact, I have other GIS apps on the AutoCAD workstation that I use to test the PostGIS connectivity prior to trying AutoCAD. I've looked for other things like Antivirus/firewall that might be contributing, but I've come up empty. I've also tried using the newer "OGR FDO" providers from osgeo.org. I get the same behavior with those.
In short, how to be able to connect AutoCAD Map 3D 2013 to a non-Windows PostgreSQL/PostGIS host? How to get a successful connection.
I have this scene with two characters, if i select a node (i.e. the hip control) and go to the graph editor it only shows one tangent. Even if i select a bunch of them in the left panel it only shows one! It seems like a bug to me because this file works fine in 2011.
I'm an Animation Mentor student and the staff have no clue of what's going on. They just advised me to stick with a working maya version for the moment, but maya 2011 is very slow for my computer.
I'm having trouble designing an alignment from an pre existing road. I drew the polyline and I need it to get curved between tangents (since there isn't a label that informs the angles between these tangents). But when I do it, not all the tangents get curved, just a part of it. The weird thing is that the whole polyline gets converted to an alignment and labeled correctly, but only the tangents near the initial stations get curved.
Other issue is that even if I draw another alignment in the same X, Y, i can't project it to my existing profile view. I can't offset my EG so i can weed it and design my alignment for my pressure pipe.
I'm more experienced working with pound and slopes in architecture design and this part of C3D seems more complicated
I'm adjusting the tangent in animation and every time I select and move the curve of a tangent, the display jumps to a wide shot of the entire curve. I select "frame" to get framed in again, select the tangent and wham...the display goes wide again. I tried it in the larger viewer and it happens again. I did the old restart, and got back in and it's doing it again.
In certain applications you are offered the option to snap the tangents at 45 degrees angles as you hold down a hotkey. Does this option exist in Smoke?
I always draw a polyline to define my alignments. When selecting the polyline for the alignment, in the Create Alignment from Objects box, at the bottom, the default is to "Add curves between tangents". Where do I turn that off so default in NO.
