I'm adjusting the tangent in animation and every time I select and move the curve of a tangent, the display jumps to a wide shot of the entire curve. I select "frame" to get framed in again, select the tangent and wham...the display goes wide again. I tried it in the larger viewer and it happens again. I did the old restart, and got back in and it's doing it again.
View 2 RepliesIn certain applications you are offered the option to snap the tangents at 45 degrees angles as you hold down a hotkey. Does this option exist in Smoke?
View 1 Replies View RelatedAny tips on smoothing out animation rendered at 24p? My sequence is 29.97. The shot is of two cars going across the screen and I'm trying to smooth out the stutter. From what I've read side to side motion is the not good for 24p as it really shows the stutter. I've tried various timewarp settings but nothing works. Do I need to have the cgi guys re render at 29.97 or 30fps or is there a technique for smoothing out the motion?
View 3 Replies View RelatedI would like to crate some animation in Action or CFX. (Start text or some lens flare, etc). I would like them to start in just the right time on music (on certain beat or place in music). Is it possible to see wave form of an audio clip in Action or CFX?
View 9 Replies View RelatedIs it possible to animate an image along a path? Or can you only track text on a path?
View 1 Replies View RelatedIn PR1 I was able to access a much larger Animation Graph - not sure how to do is in PR2
View 2 Replies View RelatedI occasionally have the ACE become inaccessible at the bottom of the GUI. Can still get it on "F5" but no editorial buttons. How to get it back without restarting.
View 3 Replies View RelatedI was wondering how do I set up the flat for in tangents and stepped for out tangents as a default so that I can block out poses?
How do you create controllers for the biped rigging?
How do you zero out transformation and Rotations and how do I freeze all the channels?
How do you create a character set for animation in 3Ds Max?
Is there any way to connect (Expression Link) a tracker data from Action or 2dTransfom to parameters inside of Spark plugin? I want to find a way to make usable a tracker in Sparks.
View 1 Replies View RelatedHow do I set the animation graph in Axis FX to show only those parameters that have been modified ? Currently takes me a while to locate the parameters that I want to tweak.
View 5 Replies View Related1. Windows/Animation Editors/HumanIK/Skeleton Generator - Generate Skeleton
2. Create control rig for it.
3. Set keys to rotate shoulder down and back.
Keys are linear by default and cannot be changed, except to "stepped". Clicking Spline, Auto, etc. Doesn't change anything. Works fine on translation curves. URL....I accidentally check the "force FIK curves to linear" button? It's totally killing our animation pipeline.
So perhaps I'm missing something blindingly obvious, but in previous versions of Maya, I've been able to simply hit F8 and check the '?' icon to be able to go in and individually rotate Local Rotation Axis to be the way I want.
For some reason I cannot find how to do this now in 2011? I've only been able to do them using the auto-tool.
Looking for the steps I need to take to be able to manipulate the local rotation axis individually as I have in the past now?
What I'd like to do is adjust the color and brightness/contrast of many layers of an animation. Now, for a still image with many layers I know you can generally add a partially transparent layer over the whole thing, however, since it's an animated .gif I have to do the same thing to each individual layer. I could probably go through and do it by hand and just get it over with. But, I'm curious if there's a feature for this, or is there a plugin that can repeat actions for multiple layers?
View 1 Replies View RelatedI know that the AJA Kona 3 card has 2 outputs. Can Smoke send one eye to one channel and the other eye to the other of the Kona 3 card? Dual Stream output is what I am really getting at.
View 4 Replies View RelatedIs there any way that Smoke can see/output sub-blacks and super whites? Can't find any way of seeing them on my scope, Smoke just clamps everything. It won't even see anything below zero in order for me to make a correction on it, everything seems to be clamped on import. I'm using ProRes HQ footage.
View 9 Replies View RelatedWhat is the best plugin to do spline warps in smoke?(need something like the distort in flame) I notice revisionfx don't make a warper for smoke on mac.
View 7 Replies View RelatedI am experimenting with Smoke 2013 pre-trial and I am having issues with importing images and video with alpha channels.
1. If I have a layered Photoshop file or png with an alpha channel (a still frame lower third), I see that I can import it as a multi layered clip, but what is the best way to have it in the sequence to show up properly?
2. If I have a QuickTime in animation format or Pro Res4444 format with an embedded alpha, how can I import that file to show and cut it on a top layer to animate above my video?
Can Smoke support the OFX architecture?
View 1 Replies View RelatedDoes Smoke have selection functionality similar to that of Combustion? As an example, you might want to selectively blur part of an image. In Combustion, you would draw a selection and then apply an operator above the selection to achieve this. I don't see a similar selection tool function in Smoke, but I imagine you could achieve the same effect by duplicating a layer and using a Gmask via the Wipe timeline FX.does Smoke not have a selection tool similar to Combustion?
View 3 Replies View RelatedWhats the dealing with importing TWs to Smoke? I have a show that's 70% keyframed with timewarps and need a way other then baking the effect to bring it into Smoke. It's comming from FCP7 and we have Automatic Duck but neither the XMLs or AAF bring anything other then the first speed of the clip. Any way to retain the keyframes?
View 1 Replies View RelatedI am having trouble getting my Civil3d line labels to adjust with the annotative scale.
View 4 Replies View RelatedIs it possible to run Flame or Smoke over a VPN? I mean, is it possible to get a license over VPN?
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
I tried Smoke 2013 PR2 on my MacBook Air 11".
It uses all the available RAM that is 4GB.
Same experience with Smoke 2012 on my MacBook pro 13"".
Is that normal?
I have RED footage which I exported as EXR. When I import them back in, they look exactly like the RED footage. But when I import the EXR in Fusion, export it back out, and then import that EXR into Smoke, it looks brighter, although I didn't change anything in Fusion. (when I compare the EXR from Smoke and the EXR from fusion in my finder on my desktop, they look exactly the same). So what is Smoke doing with the "foreign" exr on import?I was also playing with the LUT settings. I get a result which is close, but I need to be exact.
View 6 Replies View RelatedWhere do you set context in batch in the 2013 prerelease?
View 9 Replies View RelatedWhen I export a XML from FCP 7 all of my files come over and link but there is no video with my HDV files (1440 x 1080) all of my other files (Canon FX etc) come over fine.
View 9 Replies View RelatedWhat is the best way to downconvert 5D HD to SD?
I converted the h.264 files to uncompressed 10bit. Bringing in the footage and XML was fine, but as soon as I resize to PAL (the timeline was changed to PAL, as was the output on the AJA) the picture starts anti aliasing in detail areas. I have processed this with every filter in Smoke with no satisfactory result.
I am having issues for a long time regarding importing XML into smoke 2013. Will try and explain you in breif.
First When we try an import XML into smoke it just doesnt do anything, in the message history box it comes up saying FOUND 0 SOURCES.
Nothing gets imported at all. No footage is imported, nothing is shown in timeline as well.
Second For a different project when the XML does get imported, the videos get imported but then again nothing is coming up in the timeline and in the message history box we get the following error.
XML Validation Failed.
Cannot process unliked media.
we have checked all the import options to make this work, including max up level and the rest but nothing is working.
I must have changed a setting because today my interactivity in CFX has taken a hit, specifically when making Axis moves. The move doesnt register until after I have made a change in the Axis field.
I know there is a setting for this but cannot remember. Am not having the same issue grabbing Axis in viewer.
I'm currently trying to conform an XML from FCP 7 into Smoke 2012 (Linux). The issue I have is that the files I want to conform with are MFX, however the files used in the FCP timeline are PRORES, therefore have a '.mov' extension. This means the Smoke is not seeing the MXF files due to the extension & the only way around it I have found, is to edit all of the '.mov' extensions to '.mxf' extensions in the actual XML. This works well, but is a complete nightmare, particularly as I'll have to do this for 13 half hour episodes!!!!
I have tried all the different combinations of Filename, Timecode, Tape, etc, but none work due to other metadata issues from the filming of the footage to it being delivered to our edit suites!!!!
Any way of making the Smoke ignore the file extension?
Can i remove the fx history ? for example i render a cfx clip. then i want to keep the render only and disconnect the relationship with its 'cfx history' . And is there any practical benefit of it ? You maybe will ask me : 'why do you wanna do it?' , my answer is " i don't know man, it just came across my mind .
View 3 Replies View Related