Lightroom :: Widen Left Panel In Import In 5?
Oct 1, 2013
In LR5 I am trying to import a folder but it is so deep within my hard drive that there are lots of parent folders I have to click through to get to it. The problem is that the left pane is only a few inches wide and by the time I get closer to the folder I wan, I can't see it. It seems like I should be able to simply widen the panel by clicking and dragging the edge of the panel but no slider arrows appear when I hover there. How do I widen the panel?
View 1 Replies
ADVERTISEMENT
Oct 21, 2012
I finally installed lightroom 3 after many, many months of it sitting on my desk. I have been watching tutorials, and playing around with it, and I have found that the default presets are only on the right side panel in library. On the left panel in develop the heading presets shows up but when I click on the triangle nothing shows up under them. I did see a question already on here to right click on the heading and check it which I did a few times just to see if it would work and nothing.
View 5 Replies
View Related
Nov 25, 2012
I am currently working with a trial version of Lightroom 4.2 and i have been doing some silly things. The end result is that Catalog has disappeared from the left hand panel of the library tab ie i only see Folders, Collections and Publish Services..
I have tried to use File/New Catalog, Open Catalog and Open Recent but, in each case, I get an error box appearing: " ....catalog address refers to a location that is not available" it does not close and re-open LR
Now for the confession as to how this situation arose. I had been using LR quite happily using the catalogue which was automatically created when i started. Then I decided to try creating a new catalogue, in fact I ended up creating a few new catalogues. I decided to remove all the catalogues and start again with one catalogue which I would set up (I was not worried about losing the updates to the photos i had been playing around with) But, as i could find nothing within LR about deleting catalogues, I decided to remove them via Windows Explorer. When i went back into LR, Catalog was still showing in the left hand panel and, when i looked in Explorer, it was in the original folder My Pictures/Lightroom which I thought i had deleted along with all the other catalogues. Presumably it had been re-created automatically as in my original use of LR
I then compounded my mistakes by clicking on the + to the right of Catalog and, for interest, choosing whatever was at the top of the resultant list. It was at this point that Catalog disappeared never to be seen again.
View 4 Replies
View Related
Jan 14, 2013
My lr4 doesn't have a folders panel on the left hand side. Is the software defective or is it hidden?I just lost all my images!
View 3 Replies
View Related
Jan 10, 2013
Everytime I post an album to facebook a new facebook icon bar on left panel is created. Is this correct? The bar has the facebook icon as well as arrow to expand with only one album listed under it. I cannot imagine having endless bars for facebook as I upload albums. How do I correct this path.Also it doesn't show a wall post place as I saw on a tutorial. there is only an option to amke albums. What if I want to post a single photo to my wall?
View 1 Replies
View Related
Mar 26, 2014
While working in Lightroom today when I scroll down on the left side panel in grid view in the Library module the last item is Collections and the Publisher box is no longer there?
View 1 Replies
View Related
Mar 31, 2013
Missing apply during import panel in lightroom 4.
View 3 Replies
View Related
Jan 15, 2012
I've been using LR3 for over a year - current version 3.6. For no apparent reason, the 'Make second copy' menu item no longer shows in the import panel. Imported files are copied to the location specified the last time the item was available. I've looked in all of panels, but don''t find any way to disable the second copy function, or to manage the second copy function. I'm running MAC 10.6.8.
View 3 Replies
View Related
Apr 23, 2012
I had an old phone that I used to connect to my computer but it has been lost for a while now. When I go to import images from lightroom, the first device that Lightroom 4 sees is the old phone. How can I get rid of this device when I go to import images?
View 9 Replies
View Related
Jul 10, 2011
i have problem with 3Ds Max 2012. When I go to click on one of my mesh and select and left click the pannel that is soposed to pop up doesnt. I dont know if I locked it some how or if there is a bug.
View 9 Replies
View Related
Jan 21, 2014
How can I get the tool selection panel back on the left of my screen? (elements 12)
View 2 Replies
View Related
Apr 30, 2013
1. Why do Illustrator, Fireworks and InDesign (these are the ones I have checked) open with floating panels, tabs and windows, even in full screen mode... but Photoshop opens nicely in windowed mode with all the panels, tabs and windows fixed?
2. In full screen mode the left ruler is hidden behind the tools panel?! Why?!
3. How can I have Ai, Fw and Id open like Ps opens?
I have Adobe Creative Cloud CS6 for Mac.
View 2 Replies
View Related
Nov 28, 2013
lost basic panel from righthand side adjustable panel, how can i restore it? There are everything else but basic ones.
View 1 Replies
View Related
May 4, 2012
Im using Civil 3d 2012 and I couldn't find the function that I could offset the smooth curve alignment as shown on the attached pdf. I've looked through the offset alignments but those linear, curve-cube-reverse curve, curve-line curve doesn't work much.
View 3 Replies
View Related
Feb 28, 2012
I want to widen my website banner image from 950px to cover the whole width of the screen no matter what resolution or monitor
it's the blue image at [URL].......
I want to position the logo and the words exactly where they are right now but 'stretch' the image along with its shading gradient, right across the screen.
View 1 Replies
View Related
Jul 8, 2013
How do you widen /thicken fonts?
View 14 Replies
View Related
Jun 26, 2013
I'm working on a project to widen a roadway through some mountains. The problem i am having is getting the corridor to apply to a future surface so that i can determine the volume difference. my profiles show there should be some cut and fill, but i cannot get the model to reflect this. when i try to preform a bounded volume i recieve a "the surfaces do not overlap".
View 3 Replies
View Related
Apr 25, 2013
I have created a presentation file. When I record it and open up the media file only half of my model is seen throughout the video. Is there any way to widen the camera view?
View 9 Replies
View Related
Jan 9, 2014
Can we import a clip to "project" panel from custom panel in "premier pro".
View 3 Replies
View Related
Apr 15, 2011
I like the dark skin, but it seems more difficult to grab the bottom of the Color Gallery in order to stretch it down. The Grey was easier. The area where the mouse converts to the double arrow is quite narrow. At least for an old shaky man like me. Is there a REGEDIT value I could change to widen the "active" area of the gallery borders for the purpose of stretching them?
View 1 Replies
View Related
Jan 8, 2012
I need to mix left to right and right to left (hebrew) text in a textbox. How can I do that? If I copy/paste hebrew text the text is inserted as if it was left to right, that is: reversed. Can I somehow work around that?
View 2 Replies
View Related
Jun 3, 2012
I just bought Photoshop CS6 and it seems that it isn't working properly. I run Windows 7. The left click and left alt are not working. The buttons work perfectly on other programs.
View 1 Replies
View Related
May 22, 2012
I would like to know if there is any way to switch the two sidepanels. So that I get my tools for retouching over to my left hand instead of in the right side as default?
View 2 Replies
View Related
Sep 30, 2013
On an image in Develop, right click to bring up the context menu. In the past, when I moved down to "Edit", the flyout menu appeared on the right. It does this in pretty much ALL the software I use. Unless I'm against the right edge of the screen/window, the flyout comes out the right side.
In 5.2 (and possibly earlier V5 versions), ALL my flyouts come out on the left side no matter where the context menu is...
Did this change? Or is there a setting to control this? 'Cause everything else, including Photoshop, still seems to use the behavior that's been there in the past...
View 3 Replies
View Related
Jul 15, 2012
I have a photo that I want to crop a little off the top and left side. However, the size of the photo must be 8 x 12. I set the aspect ratio to 8 x 12. Then on the photo, I move the line on the top and left to where I want it. The aspect ratio then goes back to original size. What am I missing?
I am using LR3 on a mac
View 11 Replies
View Related
Jan 9, 2014
In Lightroom 5.3, in the Slideshow Module and in the Impromptu Slideshow, the left and right arrow keys should move the slideshow backwards or forwards respectively when pressed. However, in my copy of Lightroom 5.3, pressing these arrow keys while the slideshow is running or paused has no effect whatsoever. (The arrow keys work as they should)?
View 7 Replies
View Related
Jun 16, 2013
Lightroom 4.3, Win 7 64 bit
I am trying to edit an Adjustment Brush in the Develop module.
I want to fine tune the coverage area for the brush.
I can use Ctrl +/- keys to zoom in/out, and the Page Up/Down keys to scroll up and down when zoomed in, but there does not seem to be any way to scroll right and left when zoomed in. The key shortcut lists I've seen don't list anything for scroll left and right. How to scroll the image left and right when zoomed in ?
View 4 Replies
View Related
Oct 29, 2013
I created a photo with text in CS6 and imported it into LR 4.4 as a jpg but the black border on the left and right does not show, only the top and bottom? I need the overall image to be landscape 9.45 W by 7.45 T to fit into a specific presentation folder.
View 2 Replies
View Related
Feb 28, 2013
I would like to continue using the Adjustment Brush outside of a currently zoomed area without having to jump out to pan with the mouse to the next area of the image. (If I change from the Adjustment Brush to mouse-click driven panning, I simply lose the end of my formerly brushed (painted) area, because it can be 're-activated' only with its pin, which is outside of the new area where I have just moved by panning with the mouse.)
I can move up and down with the scrolling roll without quitting the Adjustment Brush, but I have not figured out how to pan horizontally with a shortcut (e.g. something like Shift + Left/Right arrow key).
I am aware that by using the Shift + PgUp/PgDn keys I can pan up to the top, then down to the bottom in the adjacent strip, and then up again in the third strip, etc. But this 'vertical zig-zagging' is very time consuming and does not necessarily take me right to the targeted next area.
Is there any shortcut for horizontal panning in Zoom?
View 6 Replies
View Related
Feb 6, 2013
I am trying to make my first blurb book in LR 4.3. The type on the spine is going left to right instead of top to bottom. How can I change that?
View 1 Replies
View Related
Feb 13, 2014
Previously shown folders from Pictures (iMac / Mavericks) on left side, no longer show up. When selecting Import, they show up on the lower right side. LR5 will not let me select from library so that I can work with the folders.
View 1 Replies
View Related
