Lightroom :: Facebook Posting Making New Multiple Bars On Left Panel
Jan 10, 2013
Everytime I post an album to facebook a new facebook icon bar on left panel is created. Is this correct? The bar has the facebook icon as well as arrow to expand with only one album listed under it. I cannot imagine having endless bars for facebook as I upload albums. How do I correct this path.Also it doesn't show a wall post place as I saw on a tutorial. there is only an option to amke albums. What if I want to post a single photo to my wall?
View 1 Replies
ADVERTISEMENT
Oct 1, 2013
In LR5 I am trying to import a folder but it is so deep within my hard drive that there are lots of parent folders I have to click through to get to it. The problem is that the left pane is only a few inches wide and by the time I get closer to the folder I wan, I can't see it. It seems like I should be able to simply widen the panel by clicking and dragging the edge of the panel but no slider arrows appear when I hover there. How do I widen the panel?
View 1 Replies
View Related
Oct 21, 2012
I finally installed lightroom 3 after many, many months of it sitting on my desk. I have been watching tutorials, and playing around with it, and I have found that the default presets are only on the right side panel in library. On the left panel in develop the heading presets shows up but when I click on the triangle nothing shows up under them. I did see a question already on here to right click on the heading and check it which I did a few times just to see if it would work and nothing.
View 5 Replies
View Related
Nov 25, 2012
I am currently working with a trial version of Lightroom 4.2 and i have been doing some silly things. The end result is that Catalog has disappeared from the left hand panel of the library tab ie i only see Folders, Collections and Publish Services..
I have tried to use File/New Catalog, Open Catalog and Open Recent but, in each case, I get an error box appearing: " ....catalog address refers to a location that is not available" it does not close and re-open LR
Now for the confession as to how this situation arose. I had been using LR quite happily using the catalogue which was automatically created when i started. Then I decided to try creating a new catalogue, in fact I ended up creating a few new catalogues. I decided to remove all the catalogues and start again with one catalogue which I would set up (I was not worried about losing the updates to the photos i had been playing around with) But, as i could find nothing within LR about deleting catalogues, I decided to remove them via Windows Explorer. When i went back into LR, Catalog was still showing in the left hand panel and, when i looked in Explorer, it was in the original folder My Pictures/Lightroom which I thought i had deleted along with all the other catalogues. Presumably it had been re-created automatically as in my original use of LR
I then compounded my mistakes by clicking on the + to the right of Catalog and, for interest, choosing whatever was at the top of the resultant list. It was at this point that Catalog disappeared never to be seen again.
View 4 Replies
View Related
Jan 14, 2013
My lr4 doesn't have a folders panel on the left hand side. Is the software defective or is it hidden?I just lost all my images!
View 3 Replies
View Related
Mar 26, 2014
While working in Lightroom today when I scroll down on the left side panel in grid view in the Library module the last item is Collections and the Publisher box is no longer there?
View 1 Replies
View Related
Aug 24, 2013
what setting, the end mp4 video will always have black vertical margins. I never have this problem when generating videos with Quicktime using the same source.
The source dimension is 4256x2832, and specifying this as output size will also create the bars.
View 2 Replies
View Related
Mar 17, 2013
I am trying out the free trial of LR4. My OS is Windows 7. The program is constantly freezing up and posting "Not Responding" at the top of my screen. I really dolike the program and would like to purchase it at the end of the trial, but only if the "Not Responding" stops.
View 1 Replies
View Related
Jul 10, 2011
i have problem with 3Ds Max 2012. When I go to click on one of my mesh and select and left click the pannel that is soposed to pop up doesnt. I dont know if I locked it some how or if there is a bug.
View 9 Replies
View Related
Feb 21, 2013
I am using Lightroom 4.3 on Windows 7 pc. I have a collection with approximately 650 images. I was working in the collection and had all the images selected. Somehow I inadvertently must have hit a keyboard shortcut that effected all the images. All of the images are negatively effected and they now look terrible. When I go to the History Panel, all the images have "blue filter" as their most recent entry. If I select one image and go back to the step before the "blue filter" everything looks fine again. My problem is I have this effect in 650 images. When I try and do the change in one image and then synch to the rest, I don't know what box to check to remove this "blue filter" that has been added to all the images. I know I can do them one by one, but with 650 images, it's a long and tedious process. Any way I can remove the "blue filter" from multiple images in a collection?
View 4 Replies
View Related
Jan 21, 2014
How can I get the tool selection panel back on the left of my screen? (elements 12)
View 2 Replies
View Related
Apr 30, 2013
1. Why do Illustrator, Fireworks and InDesign (these are the ones I have checked) open with floating panels, tabs and windows, even in full screen mode... but Photoshop opens nicely in windowed mode with all the panels, tabs and windows fixed?
2. In full screen mode the left ruler is hidden behind the tools panel?! Why?!
3. How can I have Ai, Fw and Id open like Ps opens?
I have Adobe Creative Cloud CS6 for Mac.
View 2 Replies
View Related
Aug 29, 2012
Just wanted to know what the best way of taking a rectangle and making the top left and top right corners only, rounded.
View 3 Replies
View Related
Nov 28, 2013
lost basic panel from righthand side adjustable panel, how can i restore it? There are everything else but basic ones.
View 1 Replies
View Related
Sep 16, 2013
As title says, can you Disable Properties Panel Popping up When Making Shape?
I can't seem to find the anwser anywhere. Whenever I make any shape it keeps bringing the panel up.
View 2 Replies
View Related
Jan 18, 2013
How do I authorize facebook in LR
View 5 Replies
View Related
Jun 6, 2013
i cant set up facebook in my lightroom 4 , when doing set up it always says ( no album selected ) trouble is it doesn't allow me to pick an album.
View 1 Replies
View Related
Jul 31, 2004
I know this problem is really simple, but I just can't seem to get it to work. I should be able to left-click on a layer, hold in the shift key while left-clicking on a layer further down the list to select multiple layers. It doesn't work, I can't even get the (Alt-Left Click) command to work, allowing me to select individual layers.
Both these commands work in Image Ready and Flash just fine.
I have checked the keyboard settings, but I am not really sure what to look for - nothing seems out of the ordinary.
View 3 Replies
View Related
Jul 30, 2012
Ability to upload any videos to Facebook via Lightroom's publish?
I go to the Lightroom Publishing Manager, and in the middle it says, "Videos will not be uploaded into this album. Facebook organizes them under "My Videos". OK, but it doesn't have an option for selecting that album.
View 6 Replies
View Related
Dec 2, 2013
Problem authorizing Facebook plugin in LR4. Access is denied everytime I reopen LR.
View 2 Replies
View Related
May 2, 2012
My .JPG exports look more vibrant and contrasty when viewed on Flickr and Facebook. I didn't have this issue until I calibrated my monitor. I recently purchased a new monitor (Dell Ultrasharp U2711) and went with the factory calibration for awhile. Using the factory calibration my test prints were acceptable for color but the prints came back a little too dark so I decided to calibrate the monitor with an Xrite i1. I haven't submitted test prints with the new calibration on the monitor yet but I have exported and uploaded some .JPG's to Flickr and Facebook and they look way more vibrant and modestly more contrasty than they do in Lightroom.I want others to see my images the way I intend them to.
When exporting the images I have always selected sRGB as the color space. I tried selecting the monitor profile as the color space for the .JPG's but it didn't make a difference. The exported .JPG images looked the same on Flickr and Facebook. I also tried using a color space called sRGB IEC61966-2.1 but it did not correct the boost in saturation and contrast that I am seeing now either.
I want my exported .JPG's displayed on Flickr and Facebook to look the same as they do in Lightroom. I had no problems with this when I first got the new monitor and was using the factory calibration. It's only become a problem since calibrating the monitor with the i1. I don't think I can go back to using the factory calibration but even if I could, eventually I am going to have to calibrate my monitor.
View 5 Replies
View Related
Jan 25, 2012
I don't often publish to facebook, but in the past I have created several collections under the facebook publish service, each going to its own album of the same name.
However today I decided to add 2 photos to an existing album, but when I click publish they appeared in a new album called "Adobe Photoshop Lightroom Photos" instead of the existing album.
Is this a change in the plugin or maybe something facebook has changed?
Is there any way to get it to publish direct to albums again?
View 3 Replies
View Related
Mar 22, 2013
I have Lightroom 4.3 and am using Windows 7, 64 bit, and wanted to use publish services with Facebook. Add photos to Facebook through Lightroom which is stated possible. When I try to utilize it, I am told under the Mozilla Firefox that
" it doesn't know how to open this address, because the protocol (lightroom) isn't associated with any program. You might need to install other software to open this address."
View 2 Replies
View Related
Mar 9, 2012
I'm attempting to set up the Facebook plug-in in LR4. I get as far as logging into Facebook, and clicking "allow" on the permissions page. Then LR4 attempts to go to: URL....
which of course, fails and LR complains that it did not receive the authorization token from Facebook.
View 11 Replies
View Related
Mar 29, 2014
I have LR 5.3 and when I go to File>Plug-In Extras it says "(none defined), even though when I go to the Plug-In Manager it indicates that the Facebook plug-in (and others) is installed and running. The Facebook plug-in is on my machine but LR doesn't seem to recognize it. All I want to do is export some photos to Facebook.
View 4 Replies
View Related
May 16, 2013
While trying to upload pictures from LR4 to FB, I got the message " 7.0 attempt to index a nil value " this referred to an error while uploading LR's plug in portion for export!
View 2 Replies
View Related
Jun 20, 2012
Trying to export a slideshow I made in LR4 to Facebook using the Publish Services option. I made my slideshow and exported in one fo the formats that said it was optimized for web publishing and Facebook. I then dragged the slideshow to my Facebook publishing service, and it shows up as ready to publish.
View 1 Replies
View Related
Jan 30, 2013
I can no longer publish to facebook!
I get the "Photo upload failed, but no error string was returned from Facebook" and "Can’t update this collection. Photo upload failed, but no error string was returned from Facebook."
The plugin diagnostics report is as follows:
**** Error 1
This plug-in’s post-processing task did not finish successfully.
Photo upload failed, but no error string was returned from Facebook.
Now I have searched and searched for answers, which is normally it's a permission problem with facebook. Well it's on fb page, it's set to public and app has a permission of public.
I have removed the app from fb, removed authorisation from lightroom, deleted the prefs file, logged out of fb, tried to publish when all access to fb was logged out etc, etc and still no joy.
It doesn't matter if it's a new album, an existing album, my profile or a page!
Lightroom: 4.3
Mac OSX: 10.8.2
View 16 Replies
View Related
May 25, 2012
I want to crop an image visually, by sliding the cropping bars by eye. Not by typing in a specific size. How do I do that? My cropping tool seems to be set on some dimension. I've "reset" it, tried recropping from the "original" but still when I move the top horizontal bar in the cropping tool, it automatically is moving the vertical sides. As if a preset size/dimension/ratio is applied to it. Although I didn't apply any such dimension.
View 2 Replies
View Related
Sep 10, 2012
Image below shows 6 core usage during edit of an image using LR 4.2RC. Image import was running in the background. This only occurs when I use the develop module sliders (it doesn't matter which slider).
View 18 Replies
View Related
Nov 19, 2012
I am not able to publish my pictures on Face Book, after dng conversion , its not letting the face book album to publish on wall, its not letting the dng photos, the errormessage coming that "cant upload to the facebook album named cover photos please make sure the adobe photoshop lightroom app has permission to upload with the privacy level off this album''.
we have checked the privacy level is ok, the light room is not permitting to publish the photos on the wall, it only comes as cover photo,
View 1 Replies
View Related
