I created a photo with text in CS6 and imported it into LR 4.4 as a jpg but the black border on the left and right does not show, only the top and bottom? I need the overall image to be landscape 9.45 W by 7.45 T to fit into a specific presentation folder.
View 2 RepliesI would like to know if there is any way to switch the two sidepanels. So that I get my tools for retouching over to my left hand instead of in the right side as default?
View 2 Replies View RelatedPer the attached exhibit, how to get the plot border to cover the entire sheet border instead of just the bottom left corner.
View 1 Replies View RelatedHow to ADD (almost) white Border around photo(s) to print in print module (not for creating a JPEG) WITHOUT TRIMMING the photo?
I dont understand why I'm so stupid not to be able to acheeve this simple task with Lightroom WITHOUT TRIMMING the image (altering it's proportion and cutting away photo-content)
(on light-gray backgrownd for instance, to use as cutting indications. I know how to use cutting-indications for images i print without a border)
(i do not whant to use workarounds, the kind of preparing "identity plates", a new one each for infinite variations of proportions to use as fullblown-up backgrounds..)
Epson 3880.
Lightroom 4.
Moutain Lion.
All current.
I am trying to print on 5x7 paper. I set the page setup to 5x7. I have the margins set to .2" on each side. The layout image inside Lr looks exactly how I want it to.Then I print. I end up with a .125" margin on the left and top, and a .625" margin on the right and bottom.
In the Print Module, with the Print Resolution box left unchecked, how does LR choose the ppi that will be sent to the printer? I realize that it is using an algorithm to choose a ppi.
View 12 Replies View RelatedI need to get a print out today for Christmas and cannot find a way to layout an 8x10 with a white border on a 8 1/2 x11 photo paper.
I know I have to trim the sheet to make it an exact 8x10 but I cannot find a way to end up with an 8x10 with border all around from 8 1/2 x 11 photo paper.
LR 4.3 Windows
The RGB values of the Border color added in the Lightroom 5.3 Print Module does match the RGB values of a selected spot on the image as seen in the Develop Module. How can one get a correct color from the image itself to become the Print Module Border color? Why do these not match? How can a matching result be obtained other than the very imprecise appoach of visually trying to match the color?
View 9 Replies View RelatedI have designed a book on my laptop. I now need to move the book and its photos to my desktop machine and order the book from there.
Lightroom 4
OSX 10.7.3
In the Print module (LR4.3) under Layout, the unit intervals for margins and cell size seem to be arbitrary. For example, I can get margins of 0.93 or 1.03 inches left and right and 0.94 or 1.06 inches top and bottom, but not 1.00 inch all around. Similarly I can get a cell size of 4.02 x 6.04 inches or 3.93 x 5.95 inches, but not 4.00 x 6.00 inches. why Lightroom offers such seemingly arbtrary measurement intervals or what controls the intervals?
View 5 Replies View RelatedAm trying to create custom print layout and am unable to shift selected image within cell. When I hold down control key hand appears on image though will not reposition within cell. Using Windows 7 Pro, LR 4.4, Core I7 2.6, 8 Gig Ram. New to Lightroom
View 7 Replies View RelatedOur firm has finally decided to leave LDC 2009 behind and moving to C3D 2012.I would like to ask a few questions about the way plan and profiles are created with C3D.
In LDC, we would create a full profile that included everything in it, that is proposed and existing centerline elevations and left and right top of curb elevations. Then on the sheet layouts, we would make many viewports that showed the proposed and existing sets, that is centers, lefts and rights. (medians in the example attached)
I've been watching many online videos on how to sample center, left and right and how to create a proposed center line but I can't figure out how to make a proposed left and right profile so that I can control drainage into existing inlets.
Does CorelDraw has an option to make a booklet with a right-to-left pages layout? (for Hebrew/Arabic)
View 2 Replies View RelatedI have multiple layout pages (58 pages) and would like to print them in a printer at once. How do I do that?
Currently, I open 1 layout at a time then print it 1 by 1, in which its killing me specially if I do have lots of drawings.
Publish does saving in DWF, PDF... But does not print in the printer.
I have a template with layouts of different sizes that had been working fine with a previous Xerox 6204. My D size and E size automatically oriented with the 36" side parallel to the roll feed. I have since moved to a job that got a Designjet T2300. On this machine the D size orients the 24" side parallel. This wastes 1' of paper on the left and uses 1' extra as it runs the 36" side perpendicular. I have been unable to rectify the problem. I have tried printing in portrait, that actually cut off some of the image. I have tried all types of rotation within the driver and layouts. Tech support had me going into the machine settings and set rotation to 90. Nothing. There is a warning that "HP utilities" is not installed. Could this be a remedy? When the tech came to set up the printer he installed the necessary drivers but mad no mention of this utility.
AC2012, HP desighjet T2300
I’ve done it before in the past so I know its possible but I have forgotten how. See the attached image I would like to change the printable area of my paper space layout.
View 5 Replies View RelatedIs it possible to lock the border/block on the layout so it cant be moved deleted etc, but still be able to edit the attributes
View 9 Replies View RelatedIf I'm in the layout view, I want to add a Title Border.All of my layout previews are default in Landscape.When I use the Title Border (via the ribbon) and go thru the options, it seems that my only choice is a A4 PORTRAIT border with title block.
Now my preference is to use a landscape orientation, but I can't get it to work yet.
I reset preferences using the shift key and the instructions on the cited web site. neither worked I also restarted the computer. If I open paint shop X5 the paper edges can be seen behind the image but if you look at the enclosed screen print you can see paper edges are not visible in paint shop pro X6.
View 4 Replies View RelatedI haven't used AutoCAD for seven years and when I did use it, it was for mechanical engineering purposes. Now I am using AutoCAD LT for architectural reasons. I've signed up to my local night school to get back into things.
I am making a location plan for a planning permission application to the local authority. I bought a 4 hectare or so location plan from the Ordinance Survey. I've drawn in the location of the proposed building and changed the relevant site boundaries to red and blue.
Now I want to use two layout tabs with a drawing border at a scale of 1:1250 and 1:1500 respectively. The existing scales appear to be in imperial units.
How can I change this?
suddenly the menu at the left side and the print at the top is really tiny! i tried changing the win7 resolution - then it was too big. it was fine last week!
View 3 Replies View Relatediv'e just created a montage of photos for a portfolio project im working on and now its time to print the montage.
I need to print the page so it fills the A4 or maybe slightly have a 5ml whit border all abpund,
I can't print with no border in elements 10. I used to be able in elements 3. The best I can get is a top and bottom border.
View 1 Replies View RelatedI am trying to create a border around my drawings but I'm not sure how to start. I create A3 progress drawings on a muck shift site, they are very basic but serve the purpose they have to. I would like to insert a page border to appear 10mm inside the perimeter of the page to improve the appearance.
View 2 Replies View RelatedI work with use autocad 2012, and am trying to create a pdf of a plane containing several aerial photos. I have set ImageFrame to 0. And I use Export to Pdf from output tab. When it creates pdf, images have a gray border or white, so I can see the connection between them.
I have ensured that there is no space between the images. I export from a layout with rotated UCS. The images are Tiff format.
I have an HP 6500A Plus, and it should be capable of printing edge to edge, even on custom sizes. After contacting both Apple (I am running MacOS 10.8 Mountain Lion) and HP for answers, I burned a lot of time with Adobe either just plain not getting an answer because I didn't buy it or being given the run-around. I need to know what Photoshop is doing to block the available capabilities from working.
View 6 Replies View RelatedHow can I print a booklet without a white outline around the border? I'd like the front page to be covered entirely.
View 1 Replies View RelatedI have 4 layouts all from the same drawing that I need desperately to print now. But for some reason only the border and Title block will print for me. What have I done to cause this? And how can I rectify it? I need to print these tonight
View 3 Replies View RelatedI'm printing a letter size document from illustrator at 50% size. All pages have a white background so I would like to have the document print with a black rule/ border around it so I can tell what it will look like. Is there a way to do this without manually putting a rule around all 25 existing artboards? Or is there a way to do this in the Acrobat pdf I'm outputting from this doc?(CS5)
View 3 Replies View Relatedhow to set out a drawing to a Layout from model space?
View 7 Replies View RelatedI want to print my finished floor layout but this layout view tab (layout 1) show me a tiny drawing I want it to cover all the A4 format
print.jpg