I need to get a print out today for Christmas and cannot find a way to layout an 8x10 with a white border on a 8 1/2 x11 photo paper.
I know I have to trim the sheet to make it an exact 8x10 but I cannot find a way to end up with an 8x10 with border all around from 8 1/2 x 11 photo paper.
LR 4.3 Windows
completely new to printing in LR.
View 4 Replies View RelatedUsing LR 4 print module, 4x6 works fine, but changing to 8x10 still gives me a small print either in the middle of an 8.5x11 sheet or in the upper right corner.
I am using the 8x10 template so the cell shows 8x10, and in page settings I am using US letter (8.5x11) paper, zoom to fill. The image is cropped, but that shouldn't matter, right? It looks fine on screen.
It printed correctly when I printed with PS Elements, but I want to use LR.
Tried attaching a screen shot but that didn't work either.
WinXP MCE SP3
Trying to print a pic from my digital camera the image size is 2896x1944 seemingly plenty big enough. But when windows prints at 8x10 the edges get cut off
Setting it to a canvas size anchored middle gives me a big white border..
How to ADD (almost) white Border around photo(s) to print in print module (not for creating a JPEG) WITHOUT TRIMMING the photo?
I dont understand why I'm so stupid not to be able to acheeve this simple task with Lightroom WITHOUT TRIMMING the image (altering it's proportion and cutting away photo-content)
(on light-gray backgrownd for instance, to use as cutting indications. I know how to use cutting-indications for images i print without a border)
(i do not whant to use workarounds, the kind of preparing "identity plates", a new one each for infinite variations of proportions to use as fullblown-up backgrounds..)
Trying to get an 8x10 print from a digital camera photo on a letter size paper. Reguardless of what we do, the print job only comes up to 8x6.5. How do we get an 8x10???
View 3 Replies View RelatedThe RGB values of the Border color added in the Lightroom 5.3 Print Module does match the RGB values of a selected spot on the image as seen in the Develop Module. How can one get a correct color from the image itself to become the Print Module Border color? Why do these not match? How can a matching result be obtained other than the very imprecise appoach of visually trying to match the color?
View 9 Replies View RelatedI created a photo with text in CS6 and imported it into LR 4.4 as a jpg but the black border on the left and right does not show, only the top and bottom? I need the overall image to be landscape 9.45 W by 7.45 T to fit into a specific presentation folder.
View 2 Replies View Relatedmost of my crops are set for custom. i want an 8x10 print. if i change the aspect ratio from custom to 4.5/8x10 it screws up my crop completely. that means that i cannot upload to an online website, be printed automatically and have it come out the way it want. but can that custom crop image be printed 8x10 manually?
View 2 Replies View Relatediv'e just created a montage of photos for a portfolio project im working on and now its time to print the montage.
I need to print the page so it fills the A4 or maybe slightly have a 5ml whit border all abpund,
I can't print with no border in elements 10. I used to be able in elements 3. The best I can get is a top and bottom border.
View 1 Replies View RelatedI am trying to create a border around my drawings but I'm not sure how to start. I create A3 progress drawings on a muck shift site, they are very basic but serve the purpose they have to. I would like to insert a page border to appear 10mm inside the perimeter of the page to improve the appearance.
View 2 Replies View RelatedI work with use autocad 2012, and am trying to create a pdf of a plane containing several aerial photos. I have set ImageFrame to 0. And I use Export to Pdf from output tab. When it creates pdf, images have a gray border or white, so I can see the connection between them.
I have ensured that there is no space between the images. I export from a layout with rotated UCS. The images are Tiff format.
I have an HP 6500A Plus, and it should be capable of printing edge to edge, even on custom sizes. After contacting both Apple (I am running MacOS 10.8 Mountain Lion) and HP for answers, I burned a lot of time with Adobe either just plain not getting an answer because I didn't buy it or being given the run-around. I need to know what Photoshop is doing to block the available capabilities from working.
View 6 Replies View RelatedHow can I print a booklet without a white outline around the border? I'd like the front page to be covered entirely.
View 1 Replies View RelatedI have 4 layouts all from the same drawing that I need desperately to print now. But for some reason only the border and Title block will print for me. What have I done to cause this? And how can I rectify it? I need to print these tonight
View 3 Replies View RelatedI'm printing a letter size document from illustrator at 50% size. All pages have a white background so I would like to have the document print with a black rule/ border around it so I can tell what it will look like. Is there a way to do this without manually putting a rule around all 25 existing artboards? Or is there a way to do this in the Acrobat pdf I'm outputting from this doc?(CS5)
View 3 Replies View RelatedAnd the issue I am having, isthat I created a Magazine cover using my son's football pic. To make a longstory short - I can create a fabulous 4x6, but when I try to send it out toblow up to an 8x10, it crops way too much of the cover... How do I save oredit the pic as an 8x10 so that I do not loose my added graphics andartwork?
View 4 Replies View RelatedIn LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies View RelatedI am unable to select paper size from the printer driver of my EPSON printer for the iMAC using PS5. Is there a print driver I am missing?
I'm able to select paper size from iPhoto on the MAC, but it also prints according to the paper size. Even though I've selected the image size as 11X14 the image is printed full paper size.
how to create a greeting card using 2 images on a single sheet of 8x10 paper, then cutting sheet in half for 2 cards.
View 2 Replies View RelatedI have found that when I Publish, the drawing comes out shifted about 1/8" down and 1/8" left as compared to when I use Plot. Which of course is just enough to cut off the sheet border which is 1/2" from the paper edge. I am using the same Page Setup for both Publish and Plot, same drawing.
This is to an Oce TDS600, and it only happens with 15x21 paper size. All paper sizes are set to 0" border. Probably an Oce issue, but have any of you seen this before?
I wanted to create an A4 borderless print in my canon mg6150 from within the print module. I can do a borderless print using the canon easyprint.
I go into page setup and the properties of my printer and set the page layout to borderless and click OK.
However, I am unable to set the margins to zero. When I go back into my page setup and check the page layout, it has reverted to normal so it has ignored my setting.
All was working OK and the printer is showing ink cartridges almost full In the Library Module the print review is fine.
Switch to Print Module and the print review is now blank (100% white)
Pictures no longer print
Windows 7
Espon Artisan 835 printer
LR5.3
I have just bought and installed Lightroom 5 and need to set my print size to A3 and in the future even bigger. I do not have the facility at home and need to have them sized correctly for the print shop so they do not have to waste time resizing them. I am at a loss how to do this. I cant find any settings for this size print. A3 is roughly 42 x 29.7 cm.
View 2 Replies View RelatedI cannot seem to reset the print template screen while in the " Print " module. It has adopted the smallest pic size with three times the normal border. I wish to reset to full screen in print module
View 1 Replies View RelatedHow do I get my photos printed? I select a photo but I get the maessage that no photo was selected.
View 2 Replies View RelatedEpson 3880.
Lightroom 4.
Moutain Lion.
All current.
I am trying to print on 5x7 paper. I set the page setup to 5x7. I have the margins set to .2" on each side. The layout image inside Lr looks exactly how I want it to.Then I print. I end up with a .125" margin on the left and top, and a .625" margin on the right and bottom.
It seems that, no matter how many times i save and update the profile, all the print setting (image size, sharpening, bit depth, color management, ...) are store within the preset, all but the Epson Driver settings, which have to be selected every single time.
I really can't remember if this bug was present in 4.0 or not (I'm currently running 4.1 RC), but I'm quite sure it was working OK under 3.x. Here's the thing.
I configure the printing settings and create. a profile: Profile1.I change all the settings and create a second profile: Profile2. The "Print Settings" settings are different, same printer, one for Color (Profile1), one for Advanced B&W (Profile2).I click on Profile1 (which was created with color Print Settings). Clicking on "Print Settings" or "Print", the printer settings selected under the epson driver is the ABW one (the one that belongs to Profile2).I reselect the correct setting from "Print Settings..." (Color).Click "Save" again.Righ-t click on Profile1 -> Update with current Settings. Setting seems to be saved.I then click on Profile2 and bam! The "Print Settings..." seems to be rverted to color instead of ABW.Update the correct settings, back to point #3
Can you reproduce this? This behavior is vanishig the power of the "Print One" button, unless you constantly print with tha same Driver settings.
---
Lightroom version: 4.1 RC [820174]
Version: 10.7 [3]
Application architecture: x64
Physical processor count: 4
Processor speed: 2,4 GHz
Built-in memory: 8192,0 MB
Real memory available to Lightroom: 8192,0 MB
Real memory used by Lightroom: 2388,3 MB (29,1%)
Virtual memory used by Lightroom: 4759,6 MB
Memory cache size: 866,7 MB
Displays: 1) 2560x1440, 2) 1680x1050
---
Epson R3000, latest OS X Epson Drivers.
How do I batch print several exposures at one time that differ in orientation (Landscape, Portrait) or print size (4X6 - 8 X10) or both orientation and print size? I currently have Lightroom 2.3 installed on a XP SP3 machine.
I have been unable to find any documentation on this subject.
My "Print One" button in the Print Module of LR3 is not activated. What is amiss and how do I reactivate the button?
View 1 Replies View Related