And the issue I am having, isthat I created a Magazine cover using my son's football pic. To make a longstory short - I can create a fabulous 4x6, but when I try to send it out toblow up to an 8x10, it crops way too much of the cover... How do I save oredit the pic as an 8x10 so that I do not loose my added graphics andartwork?
View 4 RepliesIs it possible to select a center point to work from, rather than an edge? (i.e. not rectangular select)
And tell it to keep an aspect ratio?
Trying to get an 8x10 print from a digital camera photo on a letter size paper. Reguardless of what we do, the print job only comes up to 8x6.5. How do we get an 8x10???
View 3 Replies View RelatedI am trying to put several photos on the timeline using overlay tracks. Any taken in portrait layout have large black bars on either side which cover up the other photos on the timeline. I have tried the Crop Borders and cropping effects, but they either don't work as I thought.
View 4 Replies View RelatedWhen I crop a photo in LR5 or 4 and open it in PS cc, the photo is not opened. If I go back and reset the cropping, then the photo and all edits made are exported and visible in PS cc
That s happening in both LR4 and 5. FURTHERMORE; if the crop is vertical , from a horizontal èpicture, the photo is opened in PS BUT the crop not maintened i.e the original sized photo is shown.
Running Mavericks, LR 5.3 LR 4,4 and PS CC
I have a new digital photo frame that displays images at 480 X 234. Is there any easy technique in Photoshop to crop images to this size (or close), without manually drawing a rectangular marquee and trying to guess at it's size? Is there any way to draw a 480 X 234 pixel rectangle and then position it over the photo, then crop to the rectangle? Any suggestions would be appreciated, since I have about 500 pictures that I want to put on a memory card for Christmas.
View 2 Replies View Relatedhow to crop or resize a 4x6 photo so that the entire photo can be viewed thru the opening of a hallmark picture Christmas card that is 3x5. I want to keep the entire picture. I have tried to add a border - but i am not having any success. I am new to photoshop and have elements 12.
View 3 Replies View Relatederasing backgounds or cropping out pics from a photo?
View 7 Replies View RelatedHow can I completely change the background of a photo and use any color or background of my choice using the Adobe Photoshop Elements 12?
View 2 Replies View RelatedThe aspect ratios seem fixed to one or other of the presets and custom doesn't seem to work.
View 3 Replies View RelatedI thought that I would take a shot at a possible reason why cropping with the paper size dialog would give different results which appear to be random.
1. The dialog opens with the programmer assuming the user will make the paper size larger than the image. He takes the difference between the paper size’s lower right corner and the image’s lower right corner and subtracts the two. That’s a positive number since the paper size is larger than the image. It’s added to all pixel positions in the image which brings the image to the lower right corner of the paper.
2. Now consider what will happen if the paper size is smaller than the image.
Scenario 1: The user picks paper size before position. The difference between the lower right corners is now a negative number. Using negative numbers to reorder the image pixels will incorrectly display the upper right corner of the image in the canvas.
Scenario 2. The user picks position before paper size. The lower right corners of the image and paper are set equal. Reducing the paper size now leaves the lower right corner of the image to be displayed.
Thus the display of the corner of the image appears to be random. However, it’s following the orders given by the user. Without doubt, there are other possible scenarios for this behavior.
Why don't Pixel Dimensions (and Document Size) change for Image Size after cropping with "Use Photo Ratio" like it does after cropping with "No Restriction"? Using Photoshop Elements 10 and Crop Tool defaults.
View 4 Replies View RelatedWhen I open a rectangular photographic image (JPG) and rotate it 90 degrees, the canvas remains the same and the ends of the photo are cropped. I there a way to rotate the whole shebang so this cropping doesn't happen?
Telling the canvas to resize to the picture doesn't seem to work for me.
Gimp 2.6.11 on Linux
I need to crop the edge (non-map) area from an old map that I scanned for use in QGIS. How do I remove the edge and not have it replaced with white. I need for the new edge to truly be the new edge. I also need to save it as a Tiff. Is it possible to crop and make the outside or background transparent and still save it as a Tiff? I need to georeference my result without any kind of edge beyond the map data.
View 3 Replies View RelatedAfter cropping a photo in cs4 i have tried hitting the return key as well as edit/crop and then my photo disappears and the image box reduces in size to about 1 inch square with no image. I have expanded the image box but nil photo. This has never happened before.
I reloaded cs4 onto my computer but the problem still exists. I have also tried out opening the file from Bridge as well as Photoshop with the same result.
How to create my own cropping guides in GIMP, is this possible? The guide shows a central cross, or a thirds, or a golden thirds, over the selection that is being cropped.
I would like to create 2 different passport ones, adhering to the rules of the 2 countries I am a citizen of. With 5 in the family, and 2 passports each, it comes up often.....
I have a 4608 x 3456 pixel photo, trying to resize to 960 x 190 pixels for the web. I tried cropping and and scaling the photo, but it is still coming out very blurry, and still not sized properly.
View 3 Replies View RelatedI have many scanned images of my collection and need to automate the process of rotating the image so that it is "square" and then cropping to remove unwanted background.
I have learned GIMP enough to do this manually with the rotate and crop tools but I have 1000s of images so how to automate this process.
I have an animated GIF whose edges I'd like to trim off. Some forums say you can only do this by breaking down animated GIFs to individual frames, cropping each, then recreating the single GIF. This would be a lot of work for 93 frames. Is there a better easier way to do this?
View 2 Replies View RelatedI have been taking a series of pictures of a church over the seasons and would like to make a slide show from them showing the changes. The problem is I have taken them by hand and so the images do not completely overlay.
Is there a way I can select part of the image, for example the top of the church door beam and then align each other image to the same position. This may require some of the images to rotate themselves slightly. I would then like to be able to crop each image to a defined area, the same in all cases, and then save the images. I was planning to produce a slide show in powerpoint with the images to show how the church has changed over the seasons but if there is an option to do this with better results I would like to consider it.
Is it possible that I LOST my aspect ratio option in tool options when cropping a photo for the website??? It is gone and I am sure it was there before. Using photo ratio, customer or other is no good for what I am doing. .
View 6 Replies View RelatedSo I'm trying to make a modified loading screen for a game (Homeworld 2 to be exact) but I'm not sure how to do this. You see the loading screen has a black background with a blue line in the shape of a hud, with the actual picture inside of it (Example, the loading bar is rendered dynamically and not part of the image). What I was thinking of doing, is erasing the inside, then copy & pasting the picture I want as a new layer over it, then cropping out the area outside the blue "hud" to give a black background with a internal picture. I was wondering if there would be a way to do that without overwriting the blue outline and having to do it manually.
View 6 Replies View RelatedI'd like to take my rectangular photo image and crop it to a pentagon shape prior to printing. This must be a regular pentagon, each side equal length (variable) and each internal angle 108 degrees (strictly).
Is there a way to do this in GIMP simply?
When I croped image to make a background for my web, I couldn't return back to first size - history was empty. All layers(about 30) have 192px*1px now. What I have to do?!
View 2 Replies View RelatedIm having some problems with GIMP and my graphire4 tablet. Im not using the pen, only the mouse in gimp. Using Windows Vista and a Wacom Graphire4 tablet. When drawing, the pointer is offset from where I am actually pointing my mouse. This only happens while drawing or selecting/cropping on the canvas. All the menus work fine, and the mouse works perfectly in other graphic programs and windows.
View 1 Replies View RelatedWinXP MCE SP3
Trying to print a pic from my digital camera the image size is 2896x1944 seemingly plenty big enough. But when windows prints at 8x10 the edges get cut off
Setting it to a canvas size anchored middle gives me a big white border..
I need to get a print out today for Christmas and cannot find a way to layout an 8x10 with a white border on a 8 1/2 x11 photo paper.
I know I have to trim the sheet to make it an exact 8x10 but I cannot find a way to end up with an 8x10 with border all around from 8 1/2 x 11 photo paper.
LR 4.3 Windows
Debian updated GIMP this morning (2.8.2) and I notice that after cropping an image, the crop lines remain on the picture. Is this a bug or a "feature" ?
View 1 Replies View RelatedI am unable to select paper size from the printer driver of my EPSON printer for the iMAC using PS5. Is there a print driver I am missing?
I'm able to select paper size from iPhoto on the MAC, but it also prints according to the paper size. Even though I've selected the image size as 11X14 the image is printed full paper size.
completely new to printing in LR.
View 4 Replies View RelatedUsing LR 4 print module, 4x6 works fine, but changing to 8x10 still gives me a small print either in the middle of an 8.5x11 sheet or in the upper right corner.
I am using the 8x10 template so the cell shows 8x10, and in page settings I am using US letter (8.5x11) paper, zoom to fill. The image is cropped, but that shouldn't matter, right? It looks fine on screen.
It printed correctly when I printed with PS Elements, but I want to use LR.
Tried attaching a screen shot but that didn't work either.