how to crop or resize a 4x6 photo so that the entire photo can be viewed thru the opening of a hallmark picture Christmas card that is 3x5. I want to keep the entire picture. I have tried to add a border - but i am not having any success. I am new to photoshop and have elements 12.
View 3 RepliesI am trying to crop or resize an image that is originally 2,122 x 1,415 px | 7.1 x 4.7 in | 300 dpi. I am to crop/resize image to fit 756 x 275 px. However, I don't want to lose the whole image. I would like to use the whole image just adjust it to the dimensions.
How can I accomplish this without creating any distortion or by removing elements by cropping the image?
How can I completely change the background of a photo and use any color or background of my choice using the Adobe Photoshop Elements 12?
View 2 Replies View RelatedHow do I resize a Photo.
View 1 Replies View RelatedI am attempting to resize a photo for the web. Our web site designer has told us that the photos must be 960x297 pixels prior to upload. Each time I "resize" the photo's they appear "stretched out" and out of proportion.
View 3 Replies View RelatedWhy don't Pixel Dimensions (and Document Size) change for Image Size after cropping with "Use Photo Ratio" like it does after cropping with "No Restriction"? Using Photoshop Elements 10 and Crop Tool defaults.
View 4 Replies View RelatedI am creating pages where I add elements and they are all resizing to clip to the page size. Very annoying. Can this be turned off?
View 6 Replies View RelatedIs it possible that I LOST my aspect ratio option in tool options when cropping a photo for the website??? It is gone and I am sure it was there before. Using photo ratio, customer or other is no good for what I am doing. .
View 6 Replies View RelatedDoes anyone know how to crop an image with a preset aspect ratio without resizing the image?
View 2 Replies View RelatedI'm using Photoshop CS3 on Windows XP.
I'm fairly new to this and I'm trying to figure out how to resize and crop a high res photo without it going a bit blurry ... The image is 18cm x 22cm and is 300 dpi. I need to resize the width to 16cm and them crop 5cm off the bottom so that it fits nicely in the space where it's to go. I seem to lose clarity when I do this and I'd like to keep it crisp of course.
1) I have a bunch of images and i need to crop out a rectangle of a specific size out of each one. So each image is going to be croped...but they all need to end up the same size. How do i do that?
2) The images from my camera a pretty big and i'm sizing them down to like 100 X 100 pixel picture. When I do this and just resize by hand it loses quality. How do i solve that?
When resizing the canvas for a photo in some but not all saved images the canvas extension color is greyed out. The particular photo is saved as a Tiff. Why is this and how can I solve the problem.
View 2 Replies View RelatedI must have accidentally changed a setting as now, after I crop an image, I appears much smaller and when I try to resize it back it's very distorted. How can I fix this?
View 3 Replies View RelatedI recently upgraded from X3 to X4 and just noticed a Cropping and Re-sizing issue with X4. When I crop or re-size an image and then save it as a JPG, the size of the image prior to saving and the size displayed after saving and reopening are different. When I open the PRINT LAYOUT screen for the JPG, it confirms that the image was NOT re sized or cropped. It almost appears like there is an issue with the way X4 saves a JPG. When I perform the exact same cropping or re-sizing but save the image as a TIF, the problem does not happen. I also duplicated the cropping and re-sizing under X3, saved the image as a JPG and the problem did NOT happen.
By the way, when I worked with tech support, they could not duplicate the problem on their system but when they remotely accessed my computer, they saw the problem. The only difference seems to be that I have a PC with a 3.33 gigahertz Intel Core i7 X 980 processor.
I have a new digital photo frame that displays images at 480 X 234. Is there any easy technique in Photoshop to crop images to this size (or close), without manually drawing a rectangular marquee and trying to guess at it's size? Is there any way to draw a 480 X 234 pixel rectangle and then position it over the photo, then crop to the rectangle? Any suggestions would be appreciated, since I have about 500 pictures that I want to put on a memory card for Christmas.
View 2 Replies View Relatederasing backgounds or cropping out pics from a photo?
View 7 Replies View RelatedI have a JPEG photo I want to use as the centerpiece for my homepage. The photo is too large however (1700 x 600 pixels) so I want to reduce the size to about 500 x 175 pixels.
The problem I'm having is that when I go to Image -> image size and try to reduce the size with the resample box checked, I still lose a significant amount of resolution to the point where it's not worth putting the photo on my homepage. how I can reduce the size without losing much resolution?
I am trying to resize a photo for printing to a 8x10 as it still crops off the top and bottom when printing. I took this with my D3100. How can I do this? I have tried printing several times.
View 1 Replies View Relatedif this is a duplicate posting. I'm new to using this resource. Just want to be sure my question is getting to the right place for qualified responses.
Here is my dilemma. I'm very anal about this and was able to solve the problem in CS3. But I've lost the instructions. What I want to do:
When I resize (or resample) an image to 30 inches wide for printing I want the image on my screen in CS6 to be exactly 30 inches wide. Thusly I am able to see a true representation of my final sharpening.
As it is now... if I resize it to 30 inches it actually shows up at approx. 24-1/2 inches wide on screen. Any magical trick to adjust this in CS6 as I was able to do in CS3?
Last week I have made photo's of 140 different paintings. Some paintings were very big, some were very small, some where rectangle shape, some were square shape. All paintings were set upon a stand and I photographed all of them from my tripod. So you can understand that on some pictures I have large paintings and on some photos I have small paintings.
Now I want to remove everything around the painting so that my photo ONLY shows the painting (even the border around the painting has to be removed).
First I select only the painting. Then I inverse my selection and remove it. So I'm now left with a photo of only the painting. So far no problem.Then I select the painting and with CTRL T I place the 'reference point location to the upper left corner and than set the height to 2000px. The painting now becomes 2000px high, but the width isn't corrected so I click on the 'maintain aspect ratio' and the painting is okay. This is now done with (for example a square painting).
But when I now perform this action on a rectangle painting, the end-result is a square painting.
After cropping a photo in cs4 i have tried hitting the return key as well as edit/crop and then my photo disappears and the image box reduces in size to about 1 inch square with no image. I have expanded the image box but nil photo. This has never happened before.
I reloaded cs4 onto my computer but the problem still exists. I have also tried out opening the file from Bridge as well as Photoshop with the same result.
I am trying to put several photos on the timeline using overlay tracks. Any taken in portrait layout have large black bars on either side which cover up the other photos on the timeline. I have tried the Crop Borders and cropping effects, but they either don't work as I thought.
View 4 Replies View RelatedAnd the issue I am having, isthat I created a Magazine cover using my son's football pic. To make a longstory short - I can create a fabulous 4x6, but when I try to send it out toblow up to an 8x10, it crops way too much of the cover... How do I save oredit the pic as an 8x10 so that I do not loose my added graphics andartwork?
View 4 Replies View RelatedWhen I crop a photo in LR5 or 4 and open it in PS cc, the photo is not opened. If I go back and reset the cropping, then the photo and all edits made are exported and visible in PS cc
That s happening in both LR4 and 5. FURTHERMORE; if the crop is vertical , from a horizontal èpicture, the photo is opened in PS BUT the crop not maintened i.e the original sized photo is shown.
Running Mavericks, LR 5.3 LR 4,4 and PS CC
The aspect ratios seem fixed to one or other of the presets and custom doesn't seem to work.
View 3 Replies View RelatedI thought that I would take a shot at a possible reason why cropping with the paper size dialog would give different results which appear to be random.
1. The dialog opens with the programmer assuming the user will make the paper size larger than the image. He takes the difference between the paper size’s lower right corner and the image’s lower right corner and subtracts the two. That’s a positive number since the paper size is larger than the image. It’s added to all pixel positions in the image which brings the image to the lower right corner of the paper.
2. Now consider what will happen if the paper size is smaller than the image.
Scenario 1: The user picks paper size before position. The difference between the lower right corners is now a negative number. Using negative numbers to reorder the image pixels will incorrectly display the upper right corner of the image in the canvas.
Scenario 2. The user picks position before paper size. The lower right corners of the image and paper are set equal. Reducing the paper size now leaves the lower right corner of the image to be displayed.
Thus the display of the corner of the image appears to be random. However, it’s following the orders given by the user. Without doubt, there are other possible scenarios for this behavior.
I am completely unable to get a couple of the photos to resize to where they will print in an 8x10 (960x768) format. No matter what I do, they're either cut off or they're distorted. I know the problem is that the original jpg file from my camera is not exactly the right proportions but isn't there some way to correct that using DPX?
In the three above, the people on the ends are cut off when I order the prints, despite my edits and resize efforts.In this one, the print comes out distorted because the sides are squashed in when it is printed at the store.
While exporting photos, it is not allowing me to resize them during the export process. It is faded and won't let me click it.
Here is a link to a screenshot of what it is doing:
[URL]
I am using lightroom 4.1 64 bit.
Is it possible to select a center point to work from, rather than an edge? (i.e. not rectangular select)
And tell it to keep an aspect ratio?
Just installed Elements 11 on a new Asus ET2300 all-in-one with Windows 8. Resolution is set at a recommended 1920x1080. I opened a jpeg in Elements and cropped the image to a square, but when I hit Print, what I see on the print set-up screen (and what actually prints) is an image with a good part of the top and bottom missing (although there is also a small image in the upper left corner that looks intact). I tried setting the computer resolution to 1600x900 and the image was severely cropped on the sides. If I choose one of the other resolution options, I guess that I might get a square or something close to it, but I assume that will effect my results in viewing venues.
View 6 Replies View RelatedI am using PSE 9 to crop JPEG scaned documents. In the past I have cropped these images and used the crop box to center the scanned image. The crop box usually goes past the edge of the document. When I did this in the past, the area off the document and inside the crop box would turn white, which is what I need it to do. Now it is turning black. how to get it back to defalting to white.
View 3 Replies View Related