I am using PSE 9 to crop JPEG scaned documents. In the past I have cropped these images and used the crop box to center the scanned image. The crop box usually goes past the edge of the document. When I did this in the past, the area off the document and inside the crop box would turn white, which is what I need it to do. Now it is turning black. how to get it back to defalting to white.
View 3 RepliesI am putting together a slideshow for my son's high school graduation and I've scanned lots of old photos (as JPEGs) into my computer. They are, of course, all different sizes and my question is what size or ratio do I use when I crop/resize them in Photoshop so that they will be uniform and the right size for a slide show?
View 1 Replies View RelatedI am trying to scan some kids artwork and import into photoshop - I can do that bit!
Then I want to crop the image so that it is around the edge of the actual picture. That is - I dont want a butterfly shape (for example) with a white box around it.
I want to paste the images onto a background colour and don't want the white square around the shape on the background!
know if I can save the image like that in photoshop!
I'd like to Edit a document that's being scanned from a scanner (Epson cx5000 all in one printer)
More specifically i want to edit the text on the document. I know about OCR software and how it will convert the image into editable text in like MS word and what not, but that's not really what i need to do.
i need the document text to look exactly the same after the edit as it does from the scan, if you know what i mean.
I'm editing a certification. I lost my OC cert (oleoresin capsicum, commonly referred to as "Pepper Spray." you only need to be sprayed with it once in your life (so long as you have the cert); and I'm absolutely not about to get sprayed again, as I'd probably rather shoot myself in the leg.
I have another person's cert that i can scan, i just need to change the date and name on the cert.
I'm not having much luck getting the edited version too look right though. The text looks too sharp compared to the other text; matching fonts is proving tricky, and when printed off, the area that's edited looks "whiter" than the areas not edited.
I have scanned one document. Then I added some text in that. I want to give the same effect like scanned document to typed text. How I will do?
View 3 Replies View RelatedI have a photo 36" x 24". I have cropped to 18.5 x 12.5" yet the document size remained the same. Now when I go to print on 13" x 19" paper, only a portion prints because the photo is too big. I shouldn't have to "scale" as then I have no way of confirming that it really will print to the crop dimensions.
Since upgrading to CS6, I have had issues with how the crop is done. For example, why when I open a photo in CS6, the crop tool is already selected by default?
I need to crop my images at 500x500 pixels for a project. I do a Save For Web & Devices and use JPEG, optimize at 80%. When I open up the new JPEG file, the pixel size says 500x500, but the document size says 6.944x6.944 inches at 72 resoultion, instead of 5x5 inches at 100 resolution. I've been doing the same process for months and it was correct in pixel and document size until recently, but I haven't changed any settings or my process.
View 6 Replies View RelatedI have a scanned document but need its text edited/altered. Got be done by tomorrow morning Its only 3 words that need editing and i will send the document to interested parties as its rather personal.
View 3 Replies View RelatedI scanned a document into PSP X5 and I am trying to use the materials palette to highlight (in red) certain spots on the document. The palette defaults to grey shades only. I reset the workspace to factory defaults and even tried the SHIFT-START - without luck. However, if I open any color images, the palette shows full color options. if this is a problem with how I scanned the document into PSP X5?
View 2 Replies View RelatedI have a senior project within CorelDRAW X6 (Student) that spans around 1200 pages spread across about 25 different .CDRs. I need to export all of those pages as .JPEGs so I can manipulate them in another program.
I know that you can batch export using a macro. But I only need exactly what's on the page at the page size. My solution was to crop each page (yes, one by one) and then later do a batch export on all of them. However, when batch exporting to .JPEG, I noticed that I was getting different results than when I had exported pages individually in the past. At first I thought this was a macro issue. But when I was trying various things I realized that anytime I closed a document after cropping it, upon reopen my drop shadows would be gone. And of course, I didn't realize this until I had already cropped all 1200 pages and was doing my batch export. I've tested it and if I crop a document and then batch export the pages before closing the document I can get the results I need. But that would require me to crop all 1200 pages again and my time is running short.
(Ignore the color differences here...I'm fairly certain it's because I didn't pay attention to my color settings on export here) Export before closing via file converter macro:
Export after closing file and then batch exporting via macro:
Any macro for cropping to page size and then exporting to jpeg (or other format) all in one fell swoop? This would hopefully bypass this issue and save me the huge problem of having to crop them all again. I could just open each document and run the macro. In theory, that would be quick.
I inadvertently saved a document as a jpg and wondered if there is any way I can convert it to a document file that is handled more easily with a file that is other than a photo file?
View 1 Replies View RelatedI need a software program to edit scanned pictures in my computer
View 1 Replies View RelatedI have photos that were sent to me. Is there a way in PSE8 to determine what dpi these photos were scanned at?
View 2 Replies View RelatedI need to produce a DVD that will use scanned images and then import both music and a voice over narration track. Which Abobe product is easiest and cheapest to use. I heard you could do this with Elements.
View 1 Replies View RelatedHow do you merge scanned documents (2 halves of the same document) into the whole document in Adobe Photoshop Element 12?
View 1 Replies View RelatedI was using PSE6 and just installed PSE12. I work alot with pictures and the option in editor/image to divide multiple photos in one scan does not work. It is pale in print and does not have an arrow like the other choices.
I have a HP PC using Windows 7 and a scanner that worked just fine, Canon LIDE.
I scanned a number of photos and when I went into editor>image and the divide scanned photos was not an active choice. It was on the menu but I couldn't select it. I scanned a number of times to include setting the pictures at an angle just to be sure it could be detected. It used to work in PSE 9
I am using an HP office jet Pro 8600 premium. OS is windows 7
How do I separate multi pictures that are scanned into the organizer of photo elements 12?
View 1 Replies View RelatedI am scanning a large number of negatives using VueScan. Vuescan automatically creates the digital files in numerical order (if you use the proper settings) as they are scanned and places them in the proper folder. The process of scanning the negatives takes several days. Upon opening PSE 11, all the files should be in numerical order as created, but at times, PSE 11 will put today's files (say numbers 400 - 500) near the top of the list (like 001, 400, 401 etc, then 002, 003 etc) What is wrong? At other times everything is correct. Is there a way to correct this?
View 1 Replies View Relatedwhat is the highest resolution I can use in photoshop from a scanned picture
View 2 Replies View RelatedI have briefly used 3 versions of Photo Elements (9, 10 and11) and have experienced the same problem in all 3. Scanned images are labeled Image1.jpg, Image2-###.jpg, Image3-###.jpg and Image4-###.jpg. As you noticed, the first scanned image is ALWAYS NAMED IMAGE1.jpg.
Because this is happening on every scan, Elements is giving me the message that the first scanned image in each subsequent scan is already in the catalog (as Image1.jpg). All the remaining images in the scan are sequenced without any problem.
It appears as though Elements places all scanned photos into a temp location under AppData and then enters them into the catalog after the scan is complete. The file names in this temp folder are Image1, Image2, Image3, Image4. Image2-4 have their filenames changed, but Image1 doesn't.
The easiest way I have found to fix this is to rename Image1.jpg after each scan. I have looked around Elements and have no user available procedures to fix this.I am using an Epson Perfection V600 Photo scanner with Epson Scan software 3.83.
I am running Elements 11.
Organizer won't accept a new scanned photo, saying "file already exists"
View 1 Replies View RelatedIs it possible to correct a digital image from an old scanned slide, which has been scanned back to front, using Photoshop Elements 10?
View 3 Replies View RelatedI'm a professional artist so I need really good photos of my work for promo and gallery applications. My Brother gave me a really good Canon Scanner. He told me I should try and scan my paintings, laying them on the scanner one way then the other (from top bottom and then side to side). Once in the computer he said I should overlay them in photoshop (Elements 7) to minimize the glare from the brushstokes (It's oil paint). [URL]. It worked but it's really blurry.
View 3 Replies View RelatedCan I obtain a proper image from a scanned B&W negative?
View 2 Replies View RelatedJust installed Elements 11 on a new Asus ET2300 all-in-one with Windows 8. Resolution is set at a recommended 1920x1080. I opened a jpeg in Elements and cropped the image to a square, but when I hit Print, what I see on the print set-up screen (and what actually prints) is an image with a good part of the top and bottom missing (although there is also a small image in the upper left corner that looks intact). I tried setting the computer resolution to 1600x900 and the image was severely cropped on the sides. If I choose one of the other resolution options, I guess that I might get a square or something close to it, but I assume that will effect my results in viewing venues.
View 6 Replies View RelatedI need a tool or option in order to set the time/date of a series of scanned slide files into the date/time sequence of my choice (when browsing with the Organizer in "Thumbnail View" (I.e. in Date/time order).
For those slides that I had sent within slide-trays, I asked the scan shop for the following for the photo-files resulting from the scan:That the name of the photo-files include a trailing number reflecting sequence as the slides within their trays.That the scan timestamp sequence reflects the sequence of the slides within their trays (this was and is important for me, in order to be able to browse within the PSE Organizer through the scan-result of one tray, in the same sequence as the slides within their trays; even when the resulting photo-files are not organized in a PSE Album; and even when being in “Thumbnail View” sequence). Unfortunately, the scan shop forgot about this request and I can therefore not look (in Thumbnail View” mode) at the scan results in the same sequence as the slides within their trays.
I am looking for a Windows Tool (or a PSE Organizer Tool/plug-in) that will allow me to set the time of a series of Foto-Files in ascending time sequence. A tool that will for example allow me to select multiple foto files • then, allow allow me to specify the date/Time of the first photo-file within the selected files to the date/time of my choiceand then add an increment of 1 or n seconds (or 1 or n minutes) to each one of the fotos that follows in the selected series. Question: For a Windows 7 and PSE 8 environment are you aware of such a tool? (the scan shop told me, they are not aware of such a tool)
Two details: When looking (before importing the foto files into the PSE Organizer) with Windows Explorer at a folder containing the scanned photo-files I can see the following: the foto files have both a “Date Created” and a “Date Modified”. But they have not yet a “Date Shot”. I do not know, whether this can make it simpler to find a solution.I tried without success, the following within the V8 Organizer, I displayed the photos in “Folder Location” view (in V8, this will show the foto-files of each folder in file-name sequence),while in Folder Location view, I selected all photos of one folderthen, while still in Folder view I did “Adjust Date and Time of Selected items” --> “change to a specified date and time”.
It seems that all selected photos got (exactly?) the same time, Unfortunately this did not work for me. Why that?
After the Time-Adjust, when switching from “Folder Location” view to “Thumbnail View”, the photos of that folder were still in the desired sequence (that looked great and I was happy). After editing one of these photos (and when storing the edited result within a versionset) , the edited version of the photo was still in the desired sequence (this still looked great!). But surprise – surprise..., once I exited from the Organizer and then relaunched it, the Versionset containing the edited Photo changed its position to the end of the series of photos having the same date/time – this was no more its desired position/sequence.
I think Divide Scanned Photos feature is amazing! [URL] ....
For those scans I put black construction paper in the rear, it works like a charm.
However, my mom scanned multiple photos prior to us finding Elements and did not use a dark background.
Is there any way to salvage this or is it too late?
When we attempt to Divide Scanned Photos on a set of B&W photos with a white background, no luck.
PSE11 just spits out a copy of the same photo.
I scan newspaper articles then add them to a PDF collection. I want the newspaper tones of grey to disappear. What is the easiest way to change the greyscale to black and white?
View 1 Replies View Relatedhow to crop or resize a 4x6 photo so that the entire photo can be viewed thru the opening of a hallmark picture Christmas card that is 3x5. I want to keep the entire picture. I have tried to add a border - but i am not having any success. I am new to photoshop and have elements 12.
View 3 Replies View RelatedAll of a sudden, when I try to crop a picture (Elements 8), the whole picture disappears.
View 3 Replies View Related