Photoshop Elements :: Determine What DPI Photo Was Scanned?
May 17, 2013I have photos that were sent to me. Is there a way in PSE8 to determine what dpi these photos were scanned at?
View 2 Replies
ADVERTISEMENT
Photoshop Elements :: Scanned Photo File Names?
Oct 6, 2012I have briefly used 3 versions of Photo Elements (9, 10 and11) and have experienced the same problem in all 3. Scanned images are labeled Image1.jpg, Image2-###.jpg, Image3-###.jpg and Image4-###.jpg. As you noticed, the first scanned image is ALWAYS NAMED IMAGE1.jpg.
Because this is happening on every scan, Elements is giving me the message that the first scanned image in each subsequent scan is already in the catalog (as Image1.jpg). All the remaining images in the scan are sequenced without any problem.
It appears as though Elements places all scanned photos into a temp location under AppData and then enters them into the catalog after the scan is complete. The file names in this temp folder are Image1, Image2, Image3, Image4. Image2-4 have their filenames changed, but Image1 doesn't.
The easiest way I have found to fix this is to rename Image1.jpg after each scan. I have looked around Elements and have no user available procedures to fix this.I am using an Epson Perfection V600 Photo scanner with Epson Scan software 3.83.
I am running Elements 11.
Photoshop Elements :: Organizer Won't Accept A New Scanned Photo?
Jul 13, 2013Organizer won't accept a new scanned photo, saying "file already exists"
View 1 Replies View RelatedPhotoshop :: Transferring Scanned Photo
Oct 13, 2013How do I transfer a photo that I scanned into Photoshop.
View 1 Replies View RelatedPhotoshop :: Odd Pattern In Scanned Photo
Oct 26, 2011My wife gave me an old photo to scan and repair, and it has an odd pattern in it due to the textured photo paper it was originally printed on. How to remove this pattern?
View 3 Replies View RelatedPhotoshop :: Scanned Photo Issue
Nov 29, 2005I'm having a problem getting consistency in the background of several prints I've scanned. I've cleaned my scanner glass and have made several scans at differing resolutions and contrast levels but the problem is persistent.
View 2 Replies View RelatedPhotoshop :: Repairing Old Grey Scanned Photo
Dec 11, 2012I am using Photoshop CS8 (and also have Photoshop Elements) with Windows 7.
I am trying to repair an old image which is about 40-yrs-old (please see below). The original image that was scanned in was a lot more uniform grey, but I have managed to add a little more contrast.
However, much still needs to be done. I was going to attempt to remove the stain on the right using the clone tool, but my main concern is to replace the sky. This would add some clouds, a little contrast, and remove the scratch at the top of the photo.
However, when I try to remove this old, dull sky using Photoshop Elements's magic wand based on this tutorial
[URL].....
I find that the wand also removes the head and body of the duck due, no doubt, to the similarity of grey tones.
How to replace this dull sky with a more interesting one, but I am not sure how to do so while keeping my duck. In fact, I would like to emphasise the presence of the duck more. Should I use a mask technique (I am not very good at masks, I am afraid) to mask the duck from the changes that a new sky will bring about?
Photoshop :: Where To Change The Settings For The Scanned Photo
Aug 29, 2004I am having a scanner - Acer ScanPrisa.
I am scanning my photos using photoshop's import command in the file menu. While scanning there exists some settings for correction in the scanner software. Now I would like to know which settings (either settings in the scanner software or the settings in the photoshop) should i use for a scanned photo. Should I first scan without changing any settings in the scanner software and change the settings in the photoshop or to change settings in the scanner software?
Photoshop :: Remove White Dust Specs From Scanned Photo?
Aug 15, 2007I have some 3x5 glossy photos taken from about ten years ago. They are no longer in the best condition, and have dust specs and superficial scratches on them. Recently, I decided to scan them and was less-than-happy with the result.
For example, one of the photo's is of me and my friend against a blue-ish wall behind us. The entire scanned image, though, is covered in little white specs. I have black hair, but it looks almost as if i have dandruff lol. even the blue background has a bunch of little white speckles
I was wondering if there was a tool or filter or other way to remove some of the small white specs from the picture.
Photoshop Elements :: How To Determine Number Of Photos
Feb 19, 2014I cannot find anywhere in Photoshop Elements where it tells the total of photographs I have in my collection. The old version told this number in the lower right hand corner. Is there somewhere in this newer version where I can find how many photos I have without having to count them?
View 2 Replies View RelatedPhotoshop Elements :: How To Pre-determine Preferred Crop Size In PSE11
Nov 1, 2013I have just upgraded from Elements 6 to Elements 11.
All my scanned 35mm images & digitals from my DSLR are cropped to my prefeered 3000x2000 with a res of 300 I can find it in the 'quick' section, but not in the 'expert' In the 'expert' section I found the clone tool I use a lot in E6, but its not in the 'quick' section To make this all happen I often need to correct the horizontal in my old 35mm images; i cannot find this either.
Lightroom :: V5 Will Not Sort Scanned Photo Properly
Oct 28, 2013Light-room 5.2, Windows 7 Home Premium 64 bit.
I have some scanned photos from a trip to England in 1996. I have assigned to each photo the date it was taken. Lightroom clearly displays the date taken. But two photos will not sort properly by date, as you can see in the screen capture; the highlighted photo was taken August 31, 1996, and sorts between photos taken Sept 2, 1996 and Sept 3, 1996.
GIMP :: Eliminating White Space Around Scanned Photo
Feb 27, 2012I scanned a family photo and the result is about 25% of a letter size sheet.
I wish to attach this to a 'My Family' post, but the result I desire is just he photo without the white space around the photo.
Code:
Paint Shop Pro :: X5 - Dividing Multi-photo Scanned File?
Jan 12, 2013I recently downloaded a Trial Version of PSP X5, and one of Adobe PSE11. For my purposes, I find PSP easier to use and therefore preferable. However, in PSE11, a scan of several photos contained in a single file can be "auto" split or divided into individual files, and as such can be edited individually. Try as I have, I have found nothing similar in PSP X5. This could be a deal breaker, as I have numerous old photos to scan and edit, and I find that doing 3 to 5 at a time is a big time saver. Does PSP 5 has this feature?
View 2 Replies View RelatedCorel PHOTO-PAINT X5 :: Improve Quality Of Scanned Images?
Jan 27, 20124705.sample2.tifOur customers have given us some black and white .tif Monochrome Bitmap images at 400 ppi (see attached sample) and 600 ppi of some scanned black and white engineering drawings. Some of the small text on the drawings is not very legible because open areas are filled in with black. Some of the vertical and horizontal lines are ragged (digitized) on the edges. Is there any way that I can improve the visual quality of these Monochrome Bitmap images in Corel Draw (which I use) or Corel Paint (of which I'm not very knowledgeable, or adept)?
View 2 Replies View RelatedPaint.NET :: Scanned TEXT In JPG Photo - How To Correct Spelling Errors
Jan 27, 2013I've been using Paint.net for a few years, but only with .jpg photos. I recently scanned some text as a .jpg and cannot figure out how to correct some spelling errors.
Also, the paper I scanned was far removed from the original, so the white blank areas are full of black artifacts. Is there some way to have Paint.net recognize the actual test so I can have a clean text copy?
Paint Shop Pro :: How To Remove Vertical Lines From Scanned Matte Photo
Jul 2, 2013I want to copy a black and white photo which was printed (old original 'wet' method) on matte paper. When I scan it the scanned image has thin white vertical stripes through all the dark areas of the photo. I have located a method of removing them using Photoshop (using layers etc) but cannot duplicate those 'instructions' using PSP X2.
how I can remove these thin stripes (they make the photo look like everyone one is wearing pin striped clothing).
Revit :: Determine Elements On A Workset In A Schedule
Dec 12, 2011Is there a way to determine elements on a workset in a schedule?
View 1 Replies View RelatedPhotoshop Elements :: Cropping JPG Scanned Document
Jan 19, 2013I am using PSE 9 to crop JPEG scaned documents. In the past I have cropped these images and used the crop box to center the scanned image. The crop box usually goes past the edge of the document. When I did this in the past, the area off the document and inside the crop box would turn white, which is what I need it to do. Now it is turning black. how to get it back to defalting to white.
View 3 Replies View RelatedPhotoshop Elements :: How To Edit Scanned Pictures
Jun 25, 2013I need a software program to edit scanned pictures in my computer
View 1 Replies View RelatedPhotoshop Elements :: DVD Production From Scanned Images
Feb 3, 2014I need to produce a DVD that will use scanned images and then import both music and a voice over narration track. Which Abobe product is easiest and cheapest to use. I heard you could do this with Elements.
View 1 Replies View RelatedPhotoshop Elements :: How To Merge Scanned Documents
Dec 2, 2013How do you merge scanned documents (2 halves of the same document) into the whole document in Adobe Photoshop Element 12?
View 1 Replies View RelatedCorel PHOTO-PAINT X5 :: How To Correct Scanned CMYK Images Originally Printed Out Of Register
Jun 10, 2012I'm working on a job that requires recreating vintage box artwork. This involves recomposing scanned images into a new layout, recreating text from matched fonts - that sort of thing. Unfortunately, some of the scanned images (originally printed offset press in cmyk) were printed with one or more of the plates out of register, creating a halo effect on one side. Can this be corrected in PhotoPaint? Is there a way to create each channel as an object which could be moved to realign the colors and then flattened again?
View 9 Replies View RelatedPhotoshop Elements :: Cropping Scanned Photos For Slideshow
Apr 25, 2013I am putting together a slideshow for my son's high school graduation and I've scanned lots of old photos (as JPEGs) into my computer. They are, of course, all different sizes and my question is what size or ratio do I use when I crop/resize them in Photoshop so that they will be uniform and the right size for a slide show?
View 1 Replies View RelatedPhotoshop Elements :: Dividing Scanned Photos On One Scan?
Feb 8, 2014I was using PSE6 and just installed PSE12. I work alot with pictures and the option in editor/image to divide multiple photos in one scan does not work. It is pale in print and does not have an arrow like the other choices.
I have a HP PC using Windows 7 and a scanner that worked just fine, Canon LIDE.
Photoshop Elements :: 11 Divide Scanned Photos Is Not Active?
Feb 25, 2013I scanned a number of photos and when I went into editor>image and the divide scanned photos was not an active choice. It was on the menu but I couldn't select it. I scanned a number of times to include setting the pictures at an angle just to be sure it could be detected. It used to work in PSE 9
I am using an HP office jet Pro 8600 premium. OS is windows 7
Photoshop Elements :: Separate Pictures After Being Scanned Into Organizer?
Jan 25, 2014How do I separate multi pictures that are scanned into the organizer of photo elements 12?
View 1 Replies View RelatedPhotoshop Elements :: 11 - Scanned Files Not Put In Numerical Order
May 27, 2013I am scanning a large number of negatives using VueScan. Vuescan automatically creates the digital files in numerical order (if you use the proper settings) as they are scanned and places them in the proper folder. The process of scanning the negatives takes several days. Upon opening PSE 11, all the files should be in numerical order as created, but at times, PSE 11 will put today's files (say numbers 400 - 500) near the top of the list (like 001, 400, 401 etc, then 002, 003 etc) What is wrong? At other times everything is correct. Is there a way to correct this?
View 1 Replies View RelatedPhotoshop Elements :: Highest Resolution That Can Be Used From Scanned Picture
Dec 26, 2012what is the highest resolution I can use in photoshop from a scanned picture
View 2 Replies View RelatedPhotoshop Elements :: How To Correct Digital Image From Old Scanned Slide
Oct 26, 2013Is it possible to correct a digital image from an old scanned slide, which has been scanned back to front, using Photoshop Elements 10?
View 3 Replies View RelatedPhotoshop Elements :: Overlay Two Scanned Photos Of Real Painting?
Jan 26, 2014I'm a professional artist so I need really good photos of my work for promo and gallery applications. My Brother gave me a really good Canon Scanner. He told me I should try and scan my paintings, laying them on the scanner one way then the other (from top bottom and then side to side). Once in the computer he said I should overlay them in photoshop (Elements 7) to minimize the glare from the brushstokes (It's oil paint). [URL]. It worked but it's really blurry.
View 3 Replies View Related