Photoshop :: Odd Pattern In Scanned Photo
Oct 26, 2011My wife gave me an old photo to scan and repair, and it has an odd pattern in it due to the textured photo paper it was originally printed on. How to remove this pattern?
View 3 Replies
ADVERTISEMENT
Photoshop :: How To Get Pattern Out Od Scanned Photos
Apr 12, 2008when I scan the photos, they are showing up with a pattern on them.
I can not get this pattern out unless I use a blur more filter several times, but that makes the photo extremely blured and useless..
Photoshop :: Transferring Scanned Photo
Oct 13, 2013How do I transfer a photo that I scanned into Photoshop.
View 1 Replies View RelatedPhotoshop :: Scanned Photo Issue
Nov 29, 2005I'm having a problem getting consistency in the background of several prints I've scanned. I've cleaned my scanner glass and have made several scans at differing resolutions and contrast levels but the problem is persistent.
View 2 Replies View RelatedPhotoshop :: Repairing Old Grey Scanned Photo
Dec 11, 2012I am using Photoshop CS8 (and also have Photoshop Elements) with Windows 7.
I am trying to repair an old image which is about 40-yrs-old (please see below). The original image that was scanned in was a lot more uniform grey, but I have managed to add a little more contrast.
However, much still needs to be done. I was going to attempt to remove the stain on the right using the clone tool, but my main concern is to replace the sky. This would add some clouds, a little contrast, and remove the scratch at the top of the photo.
However, when I try to remove this old, dull sky using Photoshop Elements's magic wand based on this tutorial
[URL].....
I find that the wand also removes the head and body of the duck due, no doubt, to the similarity of grey tones.
How to replace this dull sky with a more interesting one, but I am not sure how to do so while keeping my duck. In fact, I would like to emphasise the presence of the duck more. Should I use a mask technique (I am not very good at masks, I am afraid) to mask the duck from the changes that a new sky will bring about?
Photoshop :: Where To Change The Settings For The Scanned Photo
Aug 29, 2004I am having a scanner - Acer ScanPrisa.
I am scanning my photos using photoshop's import command in the file menu. While scanning there exists some settings for correction in the scanner software. Now I would like to know which settings (either settings in the scanner software or the settings in the photoshop) should i use for a scanned photo. Should I first scan without changing any settings in the scanner software and change the settings in the photoshop or to change settings in the scanner software?
Photoshop Elements :: Determine What DPI Photo Was Scanned?
May 17, 2013I have photos that were sent to me. Is there a way in PSE8 to determine what dpi these photos were scanned at?
View 2 Replies View RelatedPhotoshop Elements :: Scanned Photo File Names?
Oct 6, 2012I have briefly used 3 versions of Photo Elements (9, 10 and11) and have experienced the same problem in all 3. Scanned images are labeled Image1.jpg, Image2-###.jpg, Image3-###.jpg and Image4-###.jpg. As you noticed, the first scanned image is ALWAYS NAMED IMAGE1.jpg.
Because this is happening on every scan, Elements is giving me the message that the first scanned image in each subsequent scan is already in the catalog (as Image1.jpg). All the remaining images in the scan are sequenced without any problem.
It appears as though Elements places all scanned photos into a temp location under AppData and then enters them into the catalog after the scan is complete. The file names in this temp folder are Image1, Image2, Image3, Image4. Image2-4 have their filenames changed, but Image1 doesn't.
The easiest way I have found to fix this is to rename Image1.jpg after each scan. I have looked around Elements and have no user available procedures to fix this.I am using an Epson Perfection V600 Photo scanner with Epson Scan software 3.83.
I am running Elements 11.
Photoshop Elements :: Organizer Won't Accept A New Scanned Photo?
Jul 13, 2013Organizer won't accept a new scanned photo, saying "file already exists"
View 1 Replies View RelatedPhotoshop :: Remove White Dust Specs From Scanned Photo?
Aug 15, 2007I have some 3x5 glossy photos taken from about ten years ago. They are no longer in the best condition, and have dust specs and superficial scratches on them. Recently, I decided to scan them and was less-than-happy with the result.
For example, one of the photo's is of me and my friend against a blue-ish wall behind us. The entire scanned image, though, is covered in little white specs. I have black hair, but it looks almost as if i have dandruff lol. even the blue background has a bunch of little white speckles
I was wondering if there was a tool or filter or other way to remove some of the small white specs from the picture.
Lightroom :: V5 Will Not Sort Scanned Photo Properly
Oct 28, 2013Light-room 5.2, Windows 7 Home Premium 64 bit.
I have some scanned photos from a trip to England in 1996. I have assigned to each photo the date it was taken. Lightroom clearly displays the date taken. But two photos will not sort properly by date, as you can see in the screen capture; the highlighted photo was taken August 31, 1996, and sorts between photos taken Sept 2, 1996 and Sept 3, 1996.
GIMP :: Eliminating White Space Around Scanned Photo
Feb 27, 2012I scanned a family photo and the result is about 25% of a letter size sheet.
I wish to attach this to a 'My Family' post, but the result I desire is just he photo without the white space around the photo.
Code:
Paint Shop Pro :: X5 - Dividing Multi-photo Scanned File?
Jan 12, 2013I recently downloaded a Trial Version of PSP X5, and one of Adobe PSE11. For my purposes, I find PSP easier to use and therefore preferable. However, in PSE11, a scan of several photos contained in a single file can be "auto" split or divided into individual files, and as such can be edited individually. Try as I have, I have found nothing similar in PSP X5. This could be a deal breaker, as I have numerous old photos to scan and edit, and I find that doing 3 to 5 at a time is a big time saver. Does PSP 5 has this feature?
View 2 Replies View RelatedCorel PHOTO-PAINT X5 :: Improve Quality Of Scanned Images?
Jan 27, 20124705.sample2.tifOur customers have given us some black and white .tif Monochrome Bitmap images at 400 ppi (see attached sample) and 600 ppi of some scanned black and white engineering drawings. Some of the small text on the drawings is not very legible because open areas are filled in with black. Some of the vertical and horizontal lines are ragged (digitized) on the edges. Is there any way that I can improve the visual quality of these Monochrome Bitmap images in Corel Draw (which I use) or Corel Paint (of which I'm not very knowledgeable, or adept)?
View 2 Replies View RelatedPaint.NET :: Scanned TEXT In JPG Photo - How To Correct Spelling Errors
Jan 27, 2013I've been using Paint.net for a few years, but only with .jpg photos. I recently scanned some text as a .jpg and cannot figure out how to correct some spelling errors.
Also, the paper I scanned was far removed from the original, so the white blank areas are full of black artifacts. Is there some way to have Paint.net recognize the actual test so I can have a clean text copy?
Paint Shop Pro :: How To Remove Vertical Lines From Scanned Matte Photo
Jul 2, 2013I want to copy a black and white photo which was printed (old original 'wet' method) on matte paper. When I scan it the scanned image has thin white vertical stripes through all the dark areas of the photo. I have located a method of removing them using Photoshop (using layers etc) but cannot duplicate those 'instructions' using PSP X2.
how I can remove these thin stripes (they make the photo look like everyone one is wearing pin striped clothing).
Corel PHOTO-PAINT X5 :: How To Correct Scanned CMYK Images Originally Printed Out Of Register
Jun 10, 2012I'm working on a job that requires recreating vintage box artwork. This involves recomposing scanned images into a new layout, recreating text from matched fonts - that sort of thing. Unfortunately, some of the scanned images (originally printed offset press in cmyk) were printed with one or more of the plates out of register, creating a halo effect on one side. Can this be corrected in PhotoPaint? Is there a way to create each channel as an object which could be moved to realign the colors and then flattened again?
View 9 Replies View RelatedPhotoshop Elements :: Remove Raised Texture Pattern From Scan Of Original Photo?
Aug 11, 2013How can one remove a raised texture pattern from a scan of the original photo?
Have several wedding photos scanned into PS Elements that were printed by the pro, photography studio on a raised pattern paper. How to remove the honey comb type pattern so that the picture canbe printed flat on glossy color photo paper?
Illustrator :: Photo Based Pattern In Perspective
Jul 30, 2012I am drawing a house in perspective, and I have a photo of shingles. I used "Image Trace" to convert the raster image of the shingles to vector, and made a new pattern with it, but I can't get that pattern to appear in perspective on the grid.
View 4 Replies View RelatedPhotoshop :: Pattern Stamp Is Not Loading Correct Pattern In CS6
Sep 3, 2013The pattern stamp is not loading the correct pattern in Photoshop CS6. Although it shows the correct image when I go to Edit - Define Pattern, once I start painting I see that is not correct.I tried resetting my preferences.
View 3 Replies View RelatedPhotoshop :: Use Pattern Maker To Create A Tiled Pattern
Sep 18, 2012I have a pretty basic knowledge of Photoshop and I am trying to change fabrics on curtains I have managed to do this but now I am trying to use pattern maker to create a tiled pattern with a fabric so it repeats correctly I have worked out how to start this off but every time I generate a pattern and tile it it becomes distorted I have tried increasing the sample detail but this just seems to distort it more.
View 2 Replies View RelatedAutoCAD Inventor :: Find Pattern Overlay / Pattern Of Holes For Metal Floor?
May 25, 2012where could i find a pattern overlay/pattern of holes for a metal floor.
View 9 Replies View RelatedAutoCAD Inventor :: Creating Circular Pattern Of Single Occurrence Of Rectangular Pattern
Mar 27, 2012How can I make a circular pattern of a single occurence of a rectangular pattern?
A shaft has a rectangular pattern of holes (along its axis) on its surface. I want to pattern the 4th occurence of this hole pattern as a circular pattern? Can I do it in Autodesk. I can not select the a specific occurance of a patterned feature to pattern it again.
AutoCAD Inventor :: Circular Pattern / Rectangular Pattern Features
Jul 25, 2012As you see in the template photo (the photo was scanned by Microsoft Security Essentials, healthy) I wanted to extrude my circle, and I made 28 pieces with circular pattern feature; now, do I have to choose all the pieces by one by to be able to choose all?
The sum of the problem: while using the Circular Pattern feature or rectangular pattern feature in Inventor, sometimes I want to extrude (join) or cut the drawings that I made (augmented) with using circular pattern feature, rectangular pattern feature. in this case do I have to choose all the augmented members one by one (for instance I make 42 augmented members), it can take a lot of time.?
AutoCAD Inventor :: How To Use Feature Pattern Select While Creating Pattern
Jun 29, 2013How is it possible to use "Feature Pattern Select'' to make the Pattern a want in an assembly?
View 9 Replies View RelatedAutoCAD Inventor :: Create A Pattern Off A Feature In Another Pattern / 2013
May 31, 2013Is it possible to take a feature created by a pattern and reuse it to create another pattern? I have a circular part on which I have created a linear pattern (using the rectangular pattern feature) of holes, 6 in total listed as 3 ccurrences. if we number the holes 1-6, I would like to make a circular pattern based off holes 2 and 5. I have been unable to figure out how to select the individual "occurrence" related to the hole once in the pattern feature. If I create the circular pattern first and then the linear and try to suppress the others it supresses both holes in the occurrence.
View 4 Replies View RelatedIllustrator :: Create Seamless Pattern Bigger Than 9x9 With New Pattern Tool In AI6?
May 26, 2012I played with the feature a bit and understand how to create the patterns. Problem is when I go to fill in my 12x12 space there are seams. I have chosen different sizes in the pattern window but all show up with seams when I fill the larger space. Am I doing something wrong or is the largest size you can create with this tool seamlessly only 9x9?
View 8 Replies View RelatedPhotoshop :: How To Add New Pattern To Preexisting Pattern Set
Jun 12, 2013Well, the title pretty much says it all... if you have a pattern set that you've already created, how do you continue to add new patterns to it while keeping those already there? I'm going to end up with a few gazillion of them because I do texture maps in Poser. So I HAVE to be able to keep adding new patterns to the Plaid Set, the Polka Dot Set, the Purple Monkey set... But I can't find this info anywhere.
View 3 Replies View RelatedAutoCAD Inventor :: Pattern Component - Associated Feature Pattern
Jul 31, 2012I am creating an assembly with my base part being a weldment. I've added other components that mount to my base part. Now I need to add fasteners to the mating components. I have added my first fastener and now want to pattern the said fastener using the "Pattern Component" and by using the "Feature Pattern Select" option and selecting "Associated Feature Pattern". At this point I have already selected the component that I want to pattern and selected the "Associated Feature Pattern" to select my base pattern. The only problem is that I am unable to select the pattern desired.
A note on how my Weldment was constructed -The holes were created in the "machining" step of the weldment, not in the individual part before it was placed in the weldment assembly.
If I move the hole feature and its pattern to the individual part and then place it in the weldment assembly, I can then create an "Associated Feature Pattern" in my assembly file.Why can I NOT create the associated pattern when my hole features are created in the weldment assembly? Or am I missing something?
AutoCAD Inventor :: Pattern Won't Update Unless Edit The Pattern?
Nov 20, 2013I have an assembly which I am using as a icopy component. In the assembly I have the adaptive sketch which os used for the icopy function and a part which is adaptive to the sketch. I then have the part pattern itself in the assembly. The problem is the pattern will not update when changes are made unless I edit the pattern. The pattern references parameters from the sketch so that when the sketch changes the pattern should change. It works but the pattern will not update unless i open the pattern to edit it. Is there a vb function which will force the pattern to update when a change is made? I tried the update document vb functions but no change. I will try to get a sample together that is a smaller file size so you can see what I am talking about.
View 2 Replies View RelatedIllustrator :: CS6 Pattern Maker Cannot Save Non-grid Pattern?
Jun 23, 2012I love the new Pattern Maker in CS6, but I keep running into a problem:
When I create a pattern that is NOT tiled in Grid (i.e. Brick), it usually works without any problem. But once I save and re-open the file, opening the pattern in PM again will show this message:
A clipping mask was created around the pattern tile bounds to preserve legacy pattern appearance. For best results, release the clipping mask when changing the tile size or editing art that overlaps the tile edge. I would then find that, instead of a single motif layed out in a Brick tile, I would have one complete motif in the center and four quartered motifs on the corners of one clipping box. This is tiled in a Grid pattern to emulate a Brick appearance.
So long story short, what's supposed to be a Brick tile turns into a Grid tile that's faking a Brick tile.
Is there a way to keep the simple Brick tiles?