Lightroom :: Show Presets Used On Screen And On Prints
Jun 3, 2012
I have 9 copies of the same image with a different develop preset on each one so to compare. How do you get Lightroom to show the preset used on the image when viewing in lightroom and when you print, how do you get the preset name included on the print so you can tell which preset is on each print? At present I have to note the preset down and then write each preset name on each photo to show I know what was used.
View 2 Replies
ADVERTISEMENT
May 20, 2013
I am having trouble getting my presets to show up under presets on the left hand side of the screen. They are still in develop presets but there not showing up and Ive tried deleting them and adding them again then closing out of lightroom 4 and going back in but I can not seem to get them to show up again. I must have hit something but there not showing up again
View 2 Replies
View Related
Dec 8, 2011
On both LR1.4 and LR2, the develop presets always showed along the left navigation bar (antique photo, etc.). I don't use them often, but I like to have them handy. A couple months ago they disappeared from LR2 navigation bar and I just downloaded LR3 and the develop presets are in a named folder but I can't figure out how to get them to show up on the left navigation bar again.
View 4 Replies
View Related
Apr 28, 2013
My user presets do not appear in LR4 since I installed the LR5 Beta, but they do show up in LR5. How do I get them back into LR4?
View 1 Replies
View Related
May 8, 2013
When trying to print in Elements 11, after clicking "Print/Page Setup/Presets/Show Presets", the box freezes. Clicking Cancel or OK does not work. I then have to Force Quit Elements to clear it. Apple say that it is a problem with Elements. Using the same procedure in other applications, clicking Cancel or OK does work.
View 8 Replies
View Related
Sep 3, 2013
Whenever I click to show the presets folder in Lightroom 5.2 Beta preferences it wants to launch Path Finder to show me the files. I no longer own a current license for PathFinder and want Lightroom to use the normal Finder application. I do not have Path Finder even installed any longer and so clicking the button does nothing at all.
View 1 Replies
View Related
Feb 16, 2013
I just bought an iMAC... 3 days now... still trying to get it going and up and running.
Well I finally got my presets downloaded, by importing on the left side of the screen.. which is great.
But I still need to dowload my adjustment brushes...
When I go to preferences, and go to "show lightroom presets folder"IT WONT OPEN......nothing comes up.. I click and click and click.. I restarted LR, over and over.. nothing comes up..
View 1 Replies
View Related
Feb 25, 2013
I have LR3. Following function doesn't work for me: there is no preview in Navigator for presets.
Should be: " To preview the effects of a preset on your photo, move the pointer over it in the Presets panel and view the effects in the Navigator panel."
View 2 Replies
View Related
Nov 30, 2012
Only 422 of 468 photos show up on the import screen. What's happening?
View 12 Replies
View Related
Jul 31, 2013
I'm trying to use the develop module in lr for the first time, I normally use Breezebrowser. in Library mode.I have quick develop options, but in the develop module nothing shows on the right hand side of the screen at all.I have went into presents and ticked all the boxes but the only way I have options to develop are from the library module and that does not show the straigten option which i want. I have hit the D button until its worn out. This has been like this since I installed lr5, I used lr3 previously but only as a method to export images to zenfolio did not use anything apart from import and export. What do I need to do to get the options for the Develop module to show on screen? I have also hit the T for Toolbar several hundred times with no difference.
View 3 Replies
View Related
Mar 3, 2013
I have recently installed Lightroom 4. In the develop module, any adjustments will not show in the photo on the screen. The photo frequently will not load onto the screen. If I select crop mode, the photo disappears and the screen turns to gray. If I select before/after, the screen turns to gray. I have read the manual multiple times and have watched the video. I do not see any step that I am omitting or doing incorrectly. Should I uninstall & reinstall the program, or what?
View 3 Replies
View Related
Nov 17, 2012
I have recenty had to reinstall all my software, and manged to find most of my old Lightroom settings in the Lightroom Presets folder (inside the Appdata folder on a PC) but I seem to have lost my custom tone curves.
Do you know which folder they should be in (indise the Lightroom Presets folder)
I STILL don't understand why there are TWO comminty forums for Lightroom;
View 2 Replies
View Related
Sep 22, 2013
I have been using CS5 64 bit and recently my prints have printed darker than the screen. I recalibrated the monitor and then new icm is being used. I also have the correct icc for the paper. I switched back to CS5 32 bit and the problem goes away.
View 2 Replies
View Related
Mar 20, 2013
After a support call, I've lowered the brightness on my imac OS 10.6.8 but the prints are darker than ever.
I've calibrated. The printer is an Epson 4900. Photoshop is managing the colors. I did not download the no color management app.
View 7 Replies
View Related
Nov 10, 2011
The problem I`m having is that I have some text I want to have printed out. When viewing the image on GIMP the text image is the proper size that I want. When I print it out on my epson printer the text is much smaller. I called Epson and they said it must be a setting in GIMP. how to correct this? The file is a .png file.
View 1 Replies
View Related
Mar 30, 2011
I can't see the text in several paragraph text boxes but they print fine. The outline is red on-screen but the contents aren't visable unless I print it.
Can I do something to the file, clean it, save as, reindex it, re-build it ?
View 6 Replies
View Related
Jul 3, 2006
Prints from 2400 look good, but darker (about a stop darker) and bit more saturated that seeing on my calibrated Sony Artisan Monitor.
I can get good prints, but I now have to add an adjustment layer to files and lighten them all up, a real hassle. I don't remember this issue ever before.
I've tried all the different rendering intents.
View 9 Replies
View Related
Mar 1, 2013
My prints are getting clipped no matter what I try to do. I am losing approximately 1/8" from all sides of the finished print. From what I can tell, the picture is actually printing larger than the specified size.
This is my process:
In the Develop module I am cropping to the desired aspect ratio using LR presets, then going straight to the print module. My printer is an HP Photosmart C4780. In the Print module I set my margins to 0 and cell size to 4in x 6in. The picture on the screeen looks exactly how I want it to print. I go to Page Setup, select my printer, paper size (borderless 4x6) and orientation, click OK. Then to Print Settings, select the HP paper I am using, click borderless, click save. If I click "scale to fit paper size", I still lose approximately 1/16" on each side. Under Image Settings, I deselect zoom to fill. I have tried selecting it but still experience clipping. I have tried moving the margins in by fractions of an inch and I seem to recover some of the image, but its a long trial and error process that I feel I shouldn't have to do.
A 4x6 test print on regular 8.5x11 paper measures 4-1/8" x 6-1/8". The print layout in LR clearly says 4x6.
View 12 Replies
View Related
Nov 10, 2011
Does the watermark only used for images to be used for web base or put your watermarks on the actual printout?
View 2 Replies
View Related
Dec 15, 2011
how to get rid of the border on 5x7 prints. i've removed them before but can't seem to remember what i did to get the full 5x7 print.
View 1 Replies
View Related
May 21, 2009
I recently upgraded to PS-CS4 from CS3 and notice that I can only view one image on my screen. Is there a way to view more than one image on the screen at the same time? I cannot seem to find a way to change this feature.
View 4 Replies
View Related
Mar 21, 2013
I use the print module extensively and have a large collection of "saved prints".How can I search this list by name ? (My saved prints names include date and original picture name) Browsing the collection in grid view is not very practical.
View 3 Replies
View Related
Jan 20, 2013
I print using Lr 3.6 and seem to never get on paper what Lr shows on screen. A case in point is that if I print with no (zero) borders specified in the Layout section of the Print module I get a print which is identical to the one I obtain when I set the left and right borders to non-zero values (e.g. 2mm). This is even though Lr's screen does show no borders in the first case and the expected borders in the second case.
View 1 Replies
View Related
Aug 24, 2013
I print out of Lightroom, monitor and printer calibrated with Colormunki. Soft proof with the paper profile looks fine (whether the manufacturer's or mine).
Print into jpeg file - looks fine..Print to printer with identical profile - colors don't match. It makes a significant difference whether perceptive or relative is chosen in color management, but in both cases colors just don't match. Perceptive - colors look completely different, relative - most colors are good, but deep black shadows for example are dark grey instead of black.
Printing the colorsamples for the colormunki - all colors look perfect.I've spent a fortune meanwhile on paper and ink..
View 13 Replies
View Related
Oct 1, 2013
I have profiled my monitor and my printer. I can print from photoshop and prints match my display. When I print out of lightroom, they are not even close. I use the same printer profile and the program manages the color.
View 10 Replies
View Related
May 27, 2013
I have used LR 2 in the past with Windows 98 and an HP Photosmart Pro B9180 shooting with Pentax k10d using DNG files and printing with few or no problems with minimal developing. I am now trying LR 4 with the same printer and camera but with Windows 7 and with little or no changes in developing the prints are very dull and almost black. I have the latest driver updates and am have the printer letting the application manage the color with the correct setting in profile.
View 5 Replies
View Related
Dec 1, 2013
I am trying to print an US Letter sized print, no matter what I do in the page setup and print settings, it still comes slightly off center, top and bottom are goo, but the print area is offset about 1/8" to the left?
View 1 Replies
View Related
Jan 17, 2014
I have an Imac running Maverick and an Epson 3880. I have calibrated my monitor, my printer and my paper with a ColorMunki. I use ProPhoto for all apps. All settings the same in both PS and LR.
If I print an image in LR 5 and then export the same image to PS and print it (all settings the same), the PS image is almost spot on. The LR5 image is very bad, being much darker and bluer.
View 1 Replies
View Related
Aug 10, 2012
OK. So how do I print a 4x6 borderless print on my new 7510 Photosmart? My only options seem to be a 4x6 tab print. What gives?
View 7 Replies
View Related
Oct 28, 2012
I watched Matt Kloszowki's LR killer tip on borderless printing and followed his instructions but my 4x6 print only fills about a 40% of the paper and I'm not getting the full image. I added a border to outline the edge of the =print whic I scanned. What do I need to do to print the full image?
View 5 Replies
View Related
Mar 22, 2013
I am currently running win 7 64 with lightroom 4.3and an Epson Stylus Pro 3880 networked. I also have a HP 2610 as local. When printing to the Epson I get print with a lot of red to the point it looks pink or purple. This is with the color management driver set to custom and color management turned off or vice versa with color controlled by printer. If I print to the HP colors look great. I have tried different paper outputs with no luck. I also have the same problem in CS5.
View 1 Replies
View Related
