Lightroom :: How To Prevent LR4 From Applying Auto Tone Settings Upon Return From Plug-in
Nov 15, 2012
is there any way to prevent lightroom 4 to apply auto settings to the image after it is returned from treatment in a plugin? Typically, I would launch SFX or other plugins from LR4 by specifying "submit a copy of the image with LR adjustments". When finished, the result image is returned to LR4 and auto settings are applied to it, as if it was freshly imported. This is very annoying. I have every time to reset all settings manually (exposure, whites, blacks, etc) one by one. Is there a way to treat plugin returns differently from importing images from a disk/card?
View 6 Replies
ADVERTISEMENT
Feb 14, 2013
Having just loaded 10,000+ scanned negatives in LR 4.3, I am applying Auto Tone as a starting point for development settings. I have selected all images in Grid View, right-clicked to Develop Settings...Auto Tone. I can then go to the Develop page and Auto Tone is shown in every images History.the Auto button is still visible and I can click on it and get different [generally better] settings.
Is there a reason why Auto Tone applied to multiple photos produces different development settings from when it is applied individually to each photo?
View 7 Replies
View Related
Apr 25, 2012
Yes, I'm probably the only person on the planet that wants this, but I liked how the Auto Tone auto adjusted the Exposure slider (ONLY!) and left all the other sliders at zero in the Lightroom 4 beta.
Is there a way to write a preset that returns that behavior?
View 2 Replies
View Related
Feb 9, 2013
I imported tiff images into Lightroom 4 that were scanned by DigMyPics.com. The color of the images look good on the Windows 7 photo viewer. It looks horrible in Lightroom 4. My monitor is callibrated, the import develop setting is set to "none" , the box is unchecked "apply auto tone adjustments".I think that the windows viewer is showing the accurate color of the scan and LR is not. I don't think DigMyPics would send this awful color.
View 10 Replies
View Related
Jul 14, 2013
There is an apply auto tone adjustments checkbox in preferences, but it does not work properly. After checking it, some photos still require to click on auto button on the basic panel.
View 2 Replies
View Related
Nov 25, 2012
when importing in Lightroom 4, the auto tone adjustment function does not work properly. Most images come out strongly overexposed and there is no way to stop it
View 2 Replies
View Related
Dec 17, 2011
Is there a way to batch process (basic auto tone) group of photos in Lightroom?
View 1 Replies
View Related
Apr 12, 2012
How to prevent Lightroom auto-start when inserting flash stick or CD?
View 1 Replies
View Related
Feb 21, 2013
So as soon as I import my files it automatically applies one of my presets and I have to manually undo them. I don't remember ever setting this up.
View 1 Replies
View Related
Jun 7, 2012
Currently I'm trying to save an own "tone curve" but in the menu no entry to save it appears. In my understanding an entry "Eigene" (or "Own") should appear as soon as I am changing the tone curve manualy.
I am using the latest version of Lightroom 3.6 running under Windows 7 64-bit (both in German) with Camera RAW 6.7 installed.
View 2 Replies
View Related
Dec 22, 2013
I'm using Lightoom v5.2. My issue is whenever imporitng photos into lightroom, it automatically choosing the below given settings. Is there any way to disable this feature?
View 1 Replies
View Related
Feb 21, 2014
How do I prevent Lightroom to auto-start after introducing an USB-stick or otherwise in my computer? I want to start when I need it.
View 2 Replies
View Related
Oct 17, 2012
I have been doing some night time photography and occasionally have images in which I apply some heavy noise reduction and sharpening. I am looking for a way to recall all of the settings in the Detail tab.
I don't want to apply this set of adjustments on all of my images as I import them—just a few specific images after importing.
Can I do this in LR 4.2?
View 1 Replies
View Related
Apr 11, 2013
Suddenly, as in this never happened before, I can't copy and convert my .cr2 files from my camera into my Lightroom catalog. It says that the file type is not recognized. I restarted with no change, then downloaded the 4.4 update and it still doesn't work. Here is the name of one of the files I want to import. _mg_8765.cr2
I'm on Creatie Cloud and have an older Macbook Pro running ios 10.8.3.
View 2 Replies
View Related
Feb 17, 2014
I have previously imported some raw (.raf) files into Lightroom and done my adjustments - i then saved as jpegs and took all files out of the lightroom dashboard.
I now want to go back into a raw (.raf) file that I have re-imported into Lightroom, and apply the same settings that I did previously to the jpegs before.
Obviously, on re-importing the raw files, they have reverted to the original settings and not the jpeg settings that I saved at.
View 6 Replies
View Related
Jan 12, 2012
I have recently purchased a new camera (Canon 600D) and am shooting in RAW+jpg.
I make many on-camera adjustments (exposure, creative effects etc) which apply to the JPG fine. Is there a way to apply these to the RAW image also (within LR) without manually changing all the settings using the 'develop' module? For example, can I right-click on a RAW image and select 'Apply camera settings' or something along those lines?
On a side note, is there a way to ask lightroom to simply use the JPG version rather than the RAW version (on an individual photo basis)? Lightroom as I currently have it set up uses teh JPG only as a preview.
Not sure if it is relevent but I am using the latest Lightroom 3.x on Vista.
View 5 Replies
View Related
Mar 2, 2014
In Photoshop, I would apply 2 Unsharp Masks to a photo with different settings to achieve the look I want
View 2 Replies
View Related
Jul 18, 2010
Today is the first day with Lightroom 3, where I have over 200 photos from an event, that I am walking through each photo. I am in the develop module and I am setting the color label to red or blue. What seems to be constantly (not every time) happening is when I click the color for the label, LR will move to the next photo, but not apply the color label.
As I write this I'm trying it out to notice a pattern. What I see is photo 1, I click on the red label and the photo is labeled red and LR moves to photo 2. I click on the red label and LR does not set any color label and moves to photo 3.
Another thing that happened is I was then at photo 3 and clicked on the blue label. LR did not set the blue label but jumped to photo 4 and put the blue label on that photo
View 4 Replies
View Related
Dec 24, 2013
I'm having some problems with drawing paths in Illustrator. Everytime I draw a new path, this new path shows up in the standard settings. The 'brush defenition' turns back to 'basic' and the 'variable width profile' back to 'uniform'. It would save me a lot of time if I could change those standard settings into what I prefer.
View 5 Replies
View Related
Nov 4, 2012
While editing two very similar photos and using the CS6 auto-tone command, one of the photos photoshop was able to truly fix up while the other barely changed. Here is the example:
Photo A was very blue and dark; the auto-tone command magically fixed it up to have nice color variation in the rock and made it brighter. Here is the before/after:
On the other hand, photo B didn't work out the same way; the auto-tone command barely did anything, even though I thought both photos looked to have very similar problems (blue, dark, etc).Here are the links to the full original photo A and photo B in case they are useful...
how can I achieve on photo B the same effect that auto-tone did for photo A! Is there any way to find out what adjustments auto-tone made?
View 6 Replies
View Related
Mar 21, 2014
Every time I try to use Auto Smart Tone, it shuts down the program
View 5 Replies
View Related
Apr 22, 2013
In camera raw, "apply auto tone adjustments" option in the preferences dialog is not same with the "auto" button on the basic panel, isn't it? Both of them control the same sliders, are there any relationship between them?
View 3 Replies
View Related
Oct 2, 2013
Can I prevent PSE editor from autosaving to catalog?
View 2 Replies
View Related
Apr 15, 2005
I quite often need to process digital photo's on CD ROM. By which I mean I am asked to duplicate CDs with sometimes hundreds of pics on. In doing so I notice that the original pictures are invariably poor colour and brightness. When I apply an Image Adjust Auto levels function the picture is wonderfully transformed as to how it should look. If I spend time on each individual photo it takes ages to do and no longer is cost effective.
I like to keep the client happy and so, is there a way I can create a 'droplet' or 'batch' or indeed anything that will allow me to apply Auto Levels or Auto Contrast to say, 200 images at a time? I am using Photoshop 6.1 at present.
View 1 Replies
View Related
Feb 3, 2012
I find that if I have some video that has poor color, if I grab a still from it and bring it into GIMP, GIMP does a good job on correcting it.
Now, I'd like to know what color correction settings were applied by that filter so that I can go back to my video editing package and apply similar color corrections across the entire video clip, not just the still.
View 3 Replies
View Related
Mar 31, 2011
CorelDraw X4 sp4 w/ hotfix
Why is it that when in Draw save the tone curve settings it saves in a totally different directory? Then if I want to open that settings file it takes me somewhere else showing default styles/settings (*.crv)?
View 3 Replies
View Related
Dec 9, 2004
I've got around 400 images in photoshop cs...I basically need to reduce each image size, then alter the canvas size, and save.
My question is, is there a way to do that set of actions once, and then have it automatically applied to the other 399?
View 3 Replies
View Related
May 31, 2012
Every so often when I save for web and try to change the resolution to something else it doesn't update. CS5 had an apply button, but there isn't one CS6. I find that I have to enter different numbers a few times until it finally updates and I can save.
View 5 Replies
View Related
Oct 7, 2013
Sometimes when working with particularly difficult imaging I'll start with a quick auto-level or auto-color adjustment. More often than not these attempts leave little to be desired and I move on to other techniques. But once and a while (like today's subjects) I'l do an auto-color and the result is good enough to warrant inclusion in an action where I want to apply the exact same settings from that single auto-color step to a few more files.
Trouble is, unlike the levels where you can see what's been done and can save the .alv, there seems to be no equivalent for the auto-color adjustment. Can those settings be saved out?
View 2 Replies
View Related
May 8, 2013
When I created our custom profile ".arg" file, with two custom workspaces along with the OTB workspaces. I set the Auto Publish Settings to publish to PDF on Exit. With 50+ users, each can create thier own workspace for thier liking.
I have some users that like the feature, and others that do not. The ones that do not like the feature, want to turn the feature off.
So the question is if, under each individual workspace, we uncheck the Auto Publish feature, then save that workspace, is the feature turn off for JUST that workspace? Or does it cut the feature off for all workspaces?
AutoCAD 2012 / Inventor 2012
View 6 Replies
View Related
Apr 5, 2013
We are experimenting with turning on the auto publish to PDF on prompted save. (Options/Plot and Publish tab) This will be a very nice tool since we create PDF's of every dwg. that we create. However, I am having trouble locating the settings that control the page layout in this feature (The titleblock is not centered and is getting cut off when PDF is generated) but, When I preview the "standard" way of plotting to PDF, the drawing is fine. I assumed the settings would be one in the same?
View 3 Replies
View Related
