I have been doing some night time photography and occasionally have images in which I apply some heavy noise reduction and sharpening. I am looking for a way to recall all of the settings in the Detail tab.
I don't want to apply this set of adjustments on all of my images as I import them—just a few specific images after importing.
Can I do this in LR 4.2?
Suddenly, as in this never happened before, I can't copy and convert my .cr2 files from my camera into my Lightroom catalog. It says that the file type is not recognized. I restarted with no change, then downloaded the 4.4 update and it still doesn't work. Here is the name of one of the files I want to import. _mg_8765.cr2
I'm on Creatie Cloud and have an older Macbook Pro running ios 10.8.3.
I have previously imported some raw (.raf) files into Lightroom and done my adjustments - i then saved as jpegs and took all files out of the lightroom dashboard.
I now want to go back into a raw (.raf) file that I have re-imported into Lightroom, and apply the same settings that I did previously to the jpegs before.
Obviously, on re-importing the raw files, they have reverted to the original settings and not the jpeg settings that I saved at.
I have recently purchased a new camera (Canon 600D) and am shooting in RAW+jpg.
I make many on-camera adjustments (exposure, creative effects etc) which apply to the JPG fine. Is there a way to apply these to the RAW image also (within LR) without manually changing all the settings using the 'develop' module? For example, can I right-click on a RAW image and select 'Apply camera settings' or something along those lines?
On a side note, is there a way to ask lightroom to simply use the JPG version rather than the RAW version (on an individual photo basis)? Lightroom as I currently have it set up uses teh JPG only as a preview.
Not sure if it is relevent but I am using the latest Lightroom 3.x on Vista.
In Photoshop, I would apply 2 Unsharp Masks to a photo with different settings to achieve the look I want
View 2 Replies View RelatedToday is the first day with Lightroom 3, where I have over 200 photos from an event, that I am walking through each photo. I am in the develop module and I am setting the color label to red or blue. What seems to be constantly (not every time) happening is when I click the color for the label, LR will move to the next photo, but not apply the color label.
As I write this I'm trying it out to notice a pattern. What I see is photo 1, I click on the red label and the photo is labeled red and LR moves to photo 2. I click on the red label and LR does not set any color label and moves to photo 3.
Another thing that happened is I was then at photo 3 and clicked on the blue label. LR did not set the blue label but jumped to photo 4 and put the blue label on that photo
is there any way to prevent lightroom 4 to apply auto settings to the image after it is returned from treatment in a plugin? Typically, I would launch SFX or other plugins from LR4 by specifying "submit a copy of the image with LR adjustments". When finished, the result image is returned to LR4 and auto settings are applied to it, as if it was freshly imported. This is very annoying. I have every time to reset all settings manually (exposure, whites, blacks, etc) one by one. Is there a way to treat plugin returns differently from importing images from a disk/card?
View 6 Replies View RelatedI am using LR4 and Photoshop CS6. What has recently started happening is when I send an image from LR to CS6 and then save the image I reopen the image in LR and find that all of the basic settings have been changed.
I am referring to the Exposure, Contrast, Highlights, Shadows, Whites, Blacks. Even if I send the image to CS6 and make no changes, only chosing to save the image before closing, when I reopen it in LR it appears blown out because of the changes in these settings. I there a setting in preferences or somewhere that could have somehow been changed and causing this? Have updated both programs so am using the most recent versions.
It seems that when I open the image back up in LR it is way overexposed, however if I send it back to Photoshop the image is appears to be exposed properly like when I saved it.
I've got around 400 images in photoshop cs...I basically need to reduce each image size, then alter the canvas size, and save.
My question is, is there a way to do that set of actions once, and then have it automatically applied to the other 399?
Every so often when I save for web and try to change the resolution to something else it doesn't update. CS5 had an apply button, but there isn't one CS6. I find that I have to enter different numbers a few times until it finally updates and I can save.
View 5 Replies View RelatedAfter trimming a clip I can save it by File - Save trimmed clip. But if I use filter(s) with trimming before, after or no trimming, the File - Save trimmed clip greys out and I could not find any instruction how to save (render) the clip.
View 4 Replies View RelatedI recently started having a problem saving my UI settings in Max 2012. I launch my scripts and set up the buttons for them and save the UI so they’ll reload but when I restart Max, the buttons are loaded but the scripts to support them aren’t. So I have to go through and start them all again so they’ll work. Everything’s fine after that, till I restart Max, and the process starts over.
View 1 Replies View RelatedI just started using max 2013 after upgrading from 2011. I read about how you can't import your old UI settings so I started to customize some new ones, saved them to the MaxStart file and the next time I loaded max its gone back to the defaults. The same thing is happening for my preferences. I changed my undo levels to 200 yesterday and today they're back at 20.
View 8 Replies View Relatedi'll open photoshop to find all my settings have been erased, such as which scratch disk to use, how many files in the history, and what palettes are open. Is there a way to save settings in a file, so i can load them, and be happy again?
View 5 Replies View RelatedI’m a long time Photoshop user but recently picked up LR4 to try to fine tune my workflow. I’ve noticed that after importing new files (RAW, I haven’t tried with jpg) into my library as I scroll through them (1-up, not in grid) the preview comes up and then after a second or so the WB changes to a much colder image.
Does LR4 initially preview at specific settings and then change to the individual image settings? Even if so, the final images seem very cool and I feel like I have to up the temp more than I should have to. My previous workflow was to sort in Bridge and then use ACR to import to Photoshop. I feel like I did much less tweaking of my WB this way. I feel like I’m starting from square one with LR4.
sometimes you just have to reformat the hard drive and reinstall the OS. Is there a way to save off Photoshop (CS5) settings and preferences for restore later after OS and PS are reinstalled?
Perhaps keps in some xml file somewhere? Or a registry key?
I loaded an MP4 into Photoshop CS4 and edited some frames. (I'm on a Mac OSX)
Now I need to save the video file. I tried to save the video file as an MP4 and AVI leaving default settings alone. However no matter how I saved the video it looks all pixalated, or save as a much smaller video size and still all pixelated. How do I save an exact copy of my video with the edits I made?
I'm having a problem where my settings are not being saved.
I like to have the font be Arial, 12 Point and centered. When I upgraded to SP3, I had to start Corel X5 while holding the F8 key because it would keep crashing. After this, I set everything up the way I like it, but it's not keeping my setting for font, size and alignment. It keeps reverting back to Arial, 24 point, Left every time I restart Corel X5.
The way I try to save the settings is in a blank document, I change the font to 12 and X artistic and paragraph text, then I change the alignment to center and X artistic and paragraph text. Then I click CTRL-J, Document - check Save options... then click ok. Previously this always worked. Under SP3 it doesn't.
Is there anyway to save dimensioning settings, like origin offset, point size, arrow type? When I dimension an object, I have to reset all of these items each time I create a new dimension. I realize that this isn't a CAD program, but why give us this nice tool if you can't save the settings from one dimension to the next?
View 5 Replies View RelatedI am having an issue with my Sheet Sets keeping the settings I have entered after closing them out.
For example, I create a new Sheet Set (from Existing Drawings) add my layouts to it, organize them, then I right-click on the Sheet Set name and select Publish > Sheet Set Publish Options
In the dialogue box that opens I change four things:
1. Location: I point it to the network location where I want the DWFs stored.
2. File Format: change from DWFx to DWF (this is due to a limitation with our printing equipment)
3. Type: changed to Single-sheet file
4. Merge Control: changed to Lines Merge
It seems to maintain all of these setting until I close the sheet set out (change drawings, close C3D, etc.) Then when I reopen the Sheet Set later, it will revert the File Format back to DWFx and the Merge Control back to Lines Overwrite.
The reply given did not answer the issue but was mistaken for use with the plot dialogue box, which this is not about. The issue we are having is the sam as above with the "lines merge" ALWAYS reverts back to "lines overwrite" after the sheet set is closed and re-opened. I have seen a thread suggesting that If the PC3 files are read only this may be the problem, but as a cad manager in even the smallest of firms, having the pc3 files read only is just about a must to keep from accidental changes from occuring. Is this the reason? I dont see what conection the pc3 files would have with the settings in the sheet set manager. (all of our pc3 plotter setting are set to "lines merge" in each of the printer settings as well) so, where and why it keeps reverting back to "lines overwrite".
Noticed that after the last update many profile settings like snap aperatures, OSNAPS, and data shortcut working files aren't being remembered? It has only happened to a couple people, but they are having the exact same issues.
I wish it was simple as the shortcut being reset or pathed to the wrong profile, but it's not the case.
When saving a drawing why do my plot settings not save with it? As in the window I use and the scaleUsing 2007.
View 8 Replies View Relatedusing acad 2010, when trying to save a profile , i set all the desired setting , and expect to have a "save profile" button , but all buttons refer to the selected profile, how can i save a new profile?
View 3 Replies View RelatedI have recently changed computers, I am apart of a Flexi license system. Now my problem is when i go into Application options and change where to open my templates from it does not save when i quit Inventor. I have also notcied small things like the reverse cusor button i always click but everytime i get out of Inventor it defaults.
(Pictures: One is the custom templates i would like to use. I am selecting them in Application Options/ Templates than applying and closing. Then when i am fnished with Inventor for the day and shut down and the next day when i come back it defaults back to the default templates)
So we have an HP T1100 plotter and we want all the .pc3 files on the server. I go to the plotter in my devices and printers from the start menu and I add in all my custom paper sizes. Then I create a .pc3 file that points to a system printer on my machine for that plotter. I then move the .pc3 file to the server. Next thing I do is go to .pc3 file on the server and filter out all the unneeded papers sizes (arch, jis, iso, etc.) so all that shows up in the plot dialog box are the custom sizes I created. I then re-path autocad to the server in my options. All is fine so far, everything plots fine.
Now I go to another machine and point autocad to use the folders on the server for the plotters. I go to plot and the .pc3 files are there but when I pick the paper size drop down selection, all the arch, jis, iso sheets, etc... that I filtered out are now there. Well, I can go into the .pc3 file on his machine, re-filter out all those unneeded paper sizes and all is well, but then I come over to my machine and all the unneeded paper sizes are there again. It goes back and forth. I save on one machine and then the other one is messed up.
I cannot get the unfiltered papersizes to stay that way on the .pc3 file thats on the server. Why is this? I know I have the .pc3 file pointed to a system printer on my machine but we have the same printer on each machine with the same drivers. We could just put the plotter on the server so there is no system printer but that is not an option right now.
I am trying to save and load plugin's settings, ex. dialog setting values and strings. OS platform is windows XP. First I programmed the way of using *.ini file. But that not appropriate for Macintosh. So, I like to know common way by using SDK's APIs.
Development env. is VS2008 and Ai CS5 SDK.
How do I go about saving the settings on the open dialog box? It keeps moving to different locations and it keeps changing the Name / Date modified / Type / Size columns very narrow where it only shows the name and nothing else.
I do have the dialog box very large across so it can accommodate what I want including the preview.
I am installing AutoCAD for the first time in a lab at a high school. We have roaming profiles for each user. When I launch AutoCAD for the first time as a user, the program goes through it's first time configuration, check the "Privacy Statement" and uncheck the "Show at Start up" on the welcome box. After I log off and log back in and launch the program again, it goes through the setup again and I don't have the setting I had changed on the previous launching of the program. I think it has something to do with the roaming profiles because when I login as myself (I don't have roaming profiles) it works fine.
View 2 Replies View RelatedI know I remember reading about this somewhere a long time ago, how to save lots of images with the same settings. How do I do it?
Example: I need to save over a hundred images as .jpg with a quality setting of 6 and the image size at 1024x768.
I don't have either the lens correction tab or detail tab listed to the right side in develop module. It also appears any standard presets that were there are gone.
View 3 Replies View RelatedIf I create a file in Photoshop without coming from Lightroom or duplicate a file in Photoshop that I opened from Lightroom, is there a way to save the new file from Photoshop to the desired directory on my local hard drive and simultaneously have it added to my Lightroom catalog? Or do I need to save the file then import the file into the catalog? I'm working with CS6.
View 5 Replies View Related