Lightroom :: Basic Settings Are Changed In LR4 When Saving From Photoshop CS6?
Oct 18, 2012
I am using LR4 and Photoshop CS6. What has recently started happening is when I send an image from LR to CS6 and then save the image I reopen the image in LR and find that all of the basic settings have been changed.
I am referring to the Exposure, Contrast, Highlights, Shadows, Whites, Blacks. Even if I send the image to CS6 and make no changes, only chosing to save the image before closing, when I reopen it in LR it appears blown out because of the changes in these settings. I there a setting in preferences or somewhere that could have somehow been changed and causing this? Have updated both programs so am using the most recent versions.
It seems that when I open the image back up in LR it is way overexposed, however if I send it back to Photoshop the image is appears to be exposed properly like when I saved it.
View 4 Replies
ADVERTISEMENT
Nov 24, 2013
I have been using LR5.2 successfully for a few months now but all of a sudden I cannot see the basic settings in the Development Module. Specifically, I am not able to change Color Temperature, exposure, recovery, Clarity (very important to me), etc. I shoot RAW 100%, so I wonder if i accidentally hit some wrong key to make those basic features hidden?
View 2 Replies
View Related
Mar 21, 2013
I just started using LR4.3. After importing about 1000 photos and establishing my collections of chosen images, I noticed that every image had the same settings already in the Basic panel. These are temp:5500, tint:4, exposure .28, contrast: 24 and Vibrance: 6. All other settings are 0 or some other LR default. I do not recall telling LR to do this on import, and in fact, don't know how to do that. Am I forgetting that I did that? Also, I set preferences to use the default specific to my camera serial number. MIght LR be making these settings based on that selection?
View 6 Replies
View Related
Dec 22, 2013
I'm using Lightoom v5.2. My issue is whenever imporitng photos into lightroom, it automatically choosing the below given settings. Is there any way to disable this feature?
View 1 Replies
View Related
Oct 17, 2012
I have been doing some night time photography and occasionally have images in which I apply some heavy noise reduction and sharpening. I am looking for a way to recall all of the settings in the Detail tab.
I don't want to apply this set of adjustments on all of my images as I import them—just a few specific images after importing.
Can I do this in LR 4.2?
View 1 Replies
View Related
Sep 24, 2013
I'm on CS5 Recently I saved a file on photoshop in the Photoshop PDF format. It changed my default saving format to Photoshop.PDF. How do I reset or revert it back to my default .psd format?
View 3 Replies
View Related
Dec 3, 2012
I'm currently working on a vector in the trial version of Photoshop CS6 that I acquired this Friday(?), and I'm running into a troublesome dilemma every time I re-open the file to work on at a later date. I find that some layers -- not all, but maybe five or six -- have changed their color to whichever color is in my palette, or whatever was in my palette the last time I opened Photoshop.
Is there a setting I'm missing, or is this a current glitch in this version of CS6? And in case you're wondering, yes, I have tried saving with all shape layers locked before I close; it made no difference.
View 7 Replies
View Related
Nov 4, 2011
basically I record using the hauppauge HD-PVR which records the clips in the M2TS format. I've been using Videostudio Pro X3 to edit the files and rendering them and have had no problems until now. I used to render my videos using the WMV HD 720 25p setting and the quality has always been perfect.
Recently though I tried to render a video using the same setting and it renders the video really quickly and the quality looks terrible.How to fix it so it renders the way it used to or would know another format that would give me the same results?
I was thinking of re installing pro X3 in the hope of it working the way it used to but i don't know if i will lose all my projects that i'm currently working on.
View 5 Replies
View Related
Apr 3, 2012
I can't see how to set my basic default settings that I have always used for:- artistc text: color, size, etc.- paragraph text: line spacing, etc.- graphic: color, outline, etc.
I even click "text properties" and nothing happens.
How is it done in X6?
View 3 Replies
View Related
Mar 20, 2012
I have been using autocad for many years but have never experienced this situation before. I have received a simple Electrical layout file from a consultant, after opening this file my settings in AutoCAD changed, for examples the snap angle to the cursor changed to 337.18 degree, the selection box (pick box) went to maximum and a few other settings also changed. I had to manually go back to the options and change some of the settings back to what I normally have which is very much similar to default settings. But I could not change everything back to normal. I had AutoCAD 2010 and later installed 2012 to see if it would fix the problems. What surprised me is that when install fresh AutoCAD 2012, the default settings is now changed to the settings that has changed in my previous AutoCAD.I would like to change the settings back to normal.
View 9 Replies
View Related
Jul 23, 2012
I'm used to having my color picker look like this: [URL] ...
Then one day, it changed to this and I would like it to go back to the default as seen above. [URL] ....
View 3 Replies
View Related
Jan 15, 2004
If rounding dims to the nearest 1/8 inch, what settings have to be changed to make permanent and temp dims be the same value?
View 2 Replies
View Related
Mar 15, 2014
With PSE_6 under Windows 8.1, the Editor doesn't offer saving of changed picture files in stack, though it creates stacks in Organzer automatically. Any solution?
View 2 Replies
View Related
Jan 25, 2012
I am using maya 2012 32bit on windows.
I've painstakingly oriented all the joints in my human ik skeleton and then saved the file out as a backup. When I reload the file and go to component mode to view the joint orientations they are all messed up again. I've gone through this process twice with the same results.
View 1 Replies
View Related
Sep 23, 2002
i'll open photoshop to find all my settings have been erased, such as which scratch disk to use, how many files in the history, and what palettes are open. Is there a way to save settings in a file, so i can load them, and be happy again?
View 5 Replies
View Related
Apr 10, 2012
sometimes you just have to reformat the hard drive and reinstall the OS. Is there a way to save off Photoshop (CS5) settings and preferences for restore later after OS and PS are reinstalled?
Perhaps keps in some xml file somewhere? Or a registry key?
View 3 Replies
View Related
Jul 3, 2012
I loaded an MP4 into Photoshop CS4 and edited some frames. (I'm on a Mac OSX)
Now I need to save the video file. I tried to save the video file as an MP4 and AVI leaving default settings alone. However no matter how I saved the video it looks all pixalated, or save as a much smaller video size and still all pixelated. How do I save an exact copy of my video with the edits I made?
View 5 Replies
View Related
Jul 6, 2004
I know I remember reading about this somewhere a long time ago, how to save lots of images with the same settings. How do I do it?
Example: I need to save over a hundred images as .jpg with a quality setting of 6 and the image size at 1024x768.
View 3 Replies
View Related
Nov 7, 2012
I recently started having a problem saving my UI settings in Max 2012. I launch my scripts and set up the buttons for them and save the UI so they’ll reload but when I restart Max, the buttons are loaded but the scripts to support them aren’t. So I have to go through and start them all again so they’ll work. Everything’s fine after that, till I restart Max, and the process starts over.
View 1 Replies
View Related
Oct 10, 2012
I just started using max 2013 after upgrading from 2011. I read about how you can't import your old UI settings so I started to customize some new ones, saved them to the MaxStart file and the next time I loaded max its gone back to the defaults. The same thing is happening for my preferences. I changed my undo levels to 200 yesterday and today they're back at 20.
View 8 Replies
View Related
Jan 26, 2013
If I create a file in Photoshop without coming from Lightroom or duplicate a file in Photoshop that I opened from Lightroom, is there a way to save the new file from Photoshop to the desired directory on my local hard drive and simultaneously have it added to my Lightroom catalog? Or do I need to save the file then import the file into the catalog? I'm working with CS6.
View 5 Replies
View Related
Aug 18, 2013
I've created a resume in Photoshop CS5 for OS X - I know, I should've used InDesign but I'm more comfortable working in Photoshop.
The PSD is currently 2550x3300 px (8.5x11 in) at 300 dpi. I'd like to save the resume as a PDF flie so I can submit it online. I have no intentions of printing this particular document. Most websites will only accept a file size of under 1MB. What are the ideal settings for saving a PDF in the smallest file size without sacrificing on image quality? I should also note that I do not have Acrobat Pro.
View 1 Replies
View Related
May 2, 2012
I’m a long time Photoshop user but recently picked up LR4 to try to fine tune my workflow. I’ve noticed that after importing new files (RAW, I haven’t tried with jpg) into my library as I scroll through them (1-up, not in grid) the preview comes up and then after a second or so the WB changes to a much colder image.
Does LR4 initially preview at specific settings and then change to the individual image settings? Even if so, the final images seem very cool and I feel like I have to up the temp more than I should have to. My previous workflow was to sort in Bridge and then use ACR to import to Photoshop. I feel like I did much less tweaking of my WB this way. I feel like I’m starting from square one with LR4.
View 8 Replies
View Related
Jun 1, 2011
I'm having a problem where my settings are not being saved.
I like to have the font be Arial, 12 Point and centered. When I upgraded to SP3, I had to start Corel X5 while holding the F8 key because it would keep crashing. After this, I set everything up the way I like it, but it's not keeping my setting for font, size and alignment. It keeps reverting back to Arial, 24 point, Left every time I restart Corel X5.
The way I try to save the settings is in a blank document, I change the font to 12 and X artistic and paragraph text, then I change the alignment to center and X artistic and paragraph text. Then I click CTRL-J, Document - check Save options... then click ok. Previously this always worked. Under SP3 it doesn't.
View 14 Replies
View Related
Jun 3, 2011
Is there anyway to save dimensioning settings, like origin offset, point size, arrow type? When I dimension an object, I have to reset all of these items each time I create a new dimension. I realize that this isn't a CAD program, but why give us this nice tool if you can't save the settings from one dimension to the next?
View 5 Replies
View Related
Nov 2, 2012
I am having an issue with my Sheet Sets keeping the settings I have entered after closing them out.
For example, I create a new Sheet Set (from Existing Drawings) add my layouts to it, organize them, then I right-click on the Sheet Set name and select Publish > Sheet Set Publish Options
In the dialogue box that opens I change four things:
1. Location: I point it to the network location where I want the DWFs stored.
2. File Format: change from DWFx to DWF (this is due to a limitation with our printing equipment)
3. Type: changed to Single-sheet file
4. Merge Control: changed to Lines Merge
It seems to maintain all of these setting until I close the sheet set out (change drawings, close C3D, etc.) Then when I reopen the Sheet Set later, it will revert the File Format back to DWFx and the Merge Control back to Lines Overwrite.
The reply given did not answer the issue but was mistaken for use with the plot dialogue box, which this is not about. The issue we are having is the sam as above with the "lines merge" ALWAYS reverts back to "lines overwrite" after the sheet set is closed and re-opened. I have seen a thread suggesting that If the PC3 files are read only this may be the problem, but as a cad manager in even the smallest of firms, having the pc3 files read only is just about a must to keep from accidental changes from occuring. Is this the reason? I dont see what conection the pc3 files would have with the settings in the sheet set manager. (all of our pc3 plotter setting are set to "lines merge" in each of the printer settings as well) so, where and why it keeps reverting back to "lines overwrite".
View 1 Replies
View Related
Dec 16, 2011
Noticed that after the last update many profile settings like snap aperatures, OSNAPS, and data shortcut working files aren't being remembered? It has only happened to a couple people, but they are having the exact same issues.
I wish it was simple as the shortcut being reset or pathed to the wrong profile, but it's not the case.
View 3 Replies
View Related
Oct 5, 2012
When saving a drawing why do my plot settings not save with it? As in the window I use and the scaleUsing 2007.
View 8 Replies
View Related
Jan 16, 2014
using acad 2010, when trying to save a profile , i set all the desired setting , and expect to have a "save profile" button , but all buttons refer to the selected profile, how can i save a new profile?
View 3 Replies
View Related
Jan 31, 2013
I have recently changed computers, I am apart of a Flexi license system. Now my problem is when i go into Application options and change where to open my templates from it does not save when i quit Inventor. I have also notcied small things like the reverse cusor button i always click but everytime i get out of Inventor it defaults.
(Pictures: One is the custom templates i would like to use. I am selecting them in Application Options/ Templates than applying and closing. Then when i am fnished with Inventor for the day and shut down and the next day when i come back it defaults back to the default templates)
View 3 Replies
View Related
Mar 6, 2013
So we have an HP T1100 plotter and we want all the .pc3 files on the server. I go to the plotter in my devices and printers from the start menu and I add in all my custom paper sizes. Then I create a .pc3 file that points to a system printer on my machine for that plotter. I then move the .pc3 file to the server. Next thing I do is go to .pc3 file on the server and filter out all the unneeded papers sizes (arch, jis, iso, etc.) so all that shows up in the plot dialog box are the custom sizes I created. I then re-path autocad to the server in my options. All is fine so far, everything plots fine.
Now I go to another machine and point autocad to use the folders on the server for the plotters. I go to plot and the .pc3 files are there but when I pick the paper size drop down selection, all the arch, jis, iso sheets, etc... that I filtered out are now there. Well, I can go into the .pc3 file on his machine, re-filter out all those unneeded paper sizes and all is well, but then I come over to my machine and all the unneeded paper sizes are there again. It goes back and forth. I save on one machine and then the other one is messed up.
I cannot get the unfiltered papersizes to stay that way on the .pc3 file thats on the server. Why is this? I know I have the .pc3 file pointed to a system printer on my machine but we have the same printer on each machine with the same drivers. We could just put the plotter on the server so there is no system printer but that is not an option right now.
View 5 Replies
View Related
