I've seen a procedure for LR4, but it doesn't work for LR5 (the LR4 procedure involved right clicking the preset to save from a context menu after making edits to the existing preset).
View 3 RepliesI have Lightroom4.2 ~ month & have taking it slow with the DVD-ROM insrtuctions & book. The presets are fine on the left side of the screen; but when I try to access the presets under edit>preferences, they only show the Adobe logo. (I thought I was following the directons from the DVD closely enough, but they are confusing when they mention to have your presets in your catalog.)
View 1 Replies View RelatedI am looking to edit the pre-defined selections in the metadata presets. Please see screenshot [URL]....
View 1 Replies View RelatedI'm running LR3 and CS5 on a MBP Lion, and I'm working directly with RAW files. I have adjusted the images in LR and used 'edit in photoshop' to correct blemishes on some photos. I want to apply some presets at the end to render a couple of different looks (B/W and Vintage) to the final edited image. However, I find that after the file comes back from PS, it looks good, but the photo gets 'normalized' and the develop module tools get reset to zero. Hence my presets totally blow the 'edited in photoshop' image while it works just fine on the original raw.
I have also tried to work on the original image prior to any LR adjustments. Same thing, after coming back from PS, both stacked files look similar, but at the time of running the preset, the 'edited in photoshop' file gets blown out.I do not have any auto adjust settings turned on. No presets running on import/export. What am I doing wrong?
Can I export LR Raw Develop Presets to PS?
View 2 Replies View RelatedAm just setting up on a new laptop and would like to transfer my metadata presets over from my old computer. How do I export and then import them to the new computer?
View 4 Replies View RelatedIs it possible to export brush presets from Lightroom 4? I created custom brush presets on my laptop and I would like to export them and import them onto my desktop if at all possible. Did a bit of research online and could only find this link which only applies to 'Presets' in general, [URL]
View 1 Replies View RelatedI have a style frame made in Lightroom that I need to match an animation to. Is there some way to export the presets/CC settings out to After Effects or Nuke?
View 1 Replies View RelatedI recently reformatted my computer and I just realized that I lost all of my export presets even though I copied the catalog over. I've searched Finder in the all the usual places that Adobe programs store user data but I can't find them. where I can find my export presets to copy to my new home folder?
View 2 Replies View RelatedI'm using Lightroom3 version 3.6. I made all my cropping adjustments, exposure, sharpening and noise reduction adjustments. Also added LR presents like sepia tone, black and white, bleach bypass. on several of my photo's. Then I selected all photos, clicked on export button, and saved them in a folder on desktop. All of the LR presents are visible in LR and they look great. However, when I open the saved folder on my desktop....all the photos are not edited. None of the presets or crops took.
View 1 Replies View RelatedMac OS X 10.7.4, Lightroom 4.1. File>Export Presets has two groups: Lightroom and User.
Under 'Lightroom' there are a number of duplicated items which I would like to delete (cleanup).
In Library>Application Support> Adobe> Lightroom>Presets>Export .. there is ONLY User. No 'Lightroom.'
I am using a Sony Alpha 99V camera, but it is not detected on Lightroom 5, however, it appears in the compatible cameras list.
View 3 Replies View RelatedWhen I create an export preset and then return later to use it, the folder for saving it to has changed (to whatever I used last. Because I use the presets to re-size images for my 40 odd web sites, this is really inconvenient. Can this behaviour be changed so that the preset remembers the selected folder? And if not could it be considered as an option for the next update?
View 2 Replies View RelatedHow can I use multiple export presets in a single step. After I am done editing, I like to export my RAW images as JPG in 4-5 different resolutions and sizes. Currently, this means having to use the export dialog for each preset. Can I do this in a single step by grouping the presets or something?
View 1 Replies View RelatedLR 3.6, Win 7 ultimate 64 bit. Yes, I am so afraid of all the talk I hear about LR 4 being slow (it DID slowed down from 2 to 3) that I still work in 3.6 It is no longer showing/updating my export presets (see left column). Whether I add folders from the OS or from withing LR, they are not visible. If I select them in FOLDER CHOOSE (see right side of the screen shot), then it will export them properly to the right folder but I have no way to UPDATE FOLDER WITH CURRENT SETTINGS.
View 16 Replies View RelatedI am trying to create some export presets, but LR wont allow me to create any that export to Hard Drive. They all change when I hit "Add" to Email. I go and try to update with current settings, but they all keep reverting to Email and not Hard Drive.
Lightroom 4.4, btw.
I cannot find this folder?
View 2 Replies View RelatedCan I auto export like auto import. I want to auto import raw files, add presets, then auto export DNGs or JPGs.
View 4 Replies View RelatedI am having trouble getting my presets to show up under presets on the left hand side of the screen. They are still in develop presets but there not showing up and Ive tried deleting them and adding them again then closing out of lightroom 4 and going back in but I can not seem to get them to show up again. I must have hit something but there not showing up again
View 2 Replies View RelatedI have recenty had to reinstall all my software, and manged to find most of my old Lightroom settings in the Lightroom Presets folder (inside the Appdata folder on a PC) but I seem to have lost my custom tone curves.
Do you know which folder they should be in (indise the Lightroom Presets folder)
I STILL don't understand why there are TWO comminty forums for Lightroom;
If I export a photo, then make edits and want to save them, should I export them again? It looks like when I export a photo a 2nd time, then I get an additional photo on my hard drive. This is not really want I'm trying to do - I'm just trying to save it as an edited copy.
I think this contributed to some of the problems I was having with getting too many photos, then discarding the "extras" - that apparently was a bad, bad thing to do, but I'm still not quite sure how to handle this.
When i am clicking rmb and choose edit in cs6 there is no export dialog like i had before ( export with lightroom settings, copy or original). My cr2 opening in cs without changes i made in LR ?
View 4 Replies View RelatedI want to edit an export preset and in this example I want to remove the check mark to "Add to This Catalog". How do I "save" this change to that preset?
View 3 Replies View Relatedjust started with my lightroom 4 / photoshop cs5 set up? when i edit a image in lightroom4 and export to photoshop cs5 ,the image apears to be over exposed ,quite a lot.i export from lightroom with lightroom adjustments and it keeps coming into photoshop overexposed.
View 1 Replies View RelatedQuestion:
I want to edit the PDF presets I have already set up in Illustrator CS6. They were set up for a specific print job that I no longer need. For the life of me I cannot find an edit button OR a reset to default list button.
Either I am blind or digging too deeply and haven't found it yet but I'm now at an offical loss.
I can't find how to add or edit render video presets used in (File->Export->Render Video) dialog.
Am I missing something?
When I go to create a new Document in Illustrator I'll select a default document type like : Mobile and Devices. Then I go down to the different sizes and bam. The problem. I can't pick a default size that "I" want to use. Yes there are preset sizes but none of them are the ones I want to use. Ok there has to be a text file or something that lets me edit/add new document sizes to illustrator. It shouldn't be this hard. I don't own CS6. I'm on an older version of Illustrator right now. I don't know if you guys fixed this in CS6. But it should be like photoshop or indesign. Why it's different baffles me.
This is a JDI if there ever is one. Make all presets in all programs the same (editing wise) and if possible make a preset manager that allows for one preset to be added or edited and all apps see these presets.
My issue is that I have a number of presets-brushes, tools, actions, workspace setup, etc, that allow me to have speed and focus on getting the job done. I also work with a wacom tablet, and although that is 3rd party, I need know that photoshop is set up to maximize the brush sensitivity of the tablet.
Is there a way for me to export my settings from one machine to another? And a way for them to revert back to thier own after I finish?
When trying to print in Elements 11, after clicking "Print/Page Setup/Presets/Show Presets", the box freezes. Clicking Cancel or OK does not work. I then have to Force Quit Elements to clear it. Apple say that it is a problem with Elements. Using the same procedure in other applications, clicking Cancel or OK does work.
View 8 Replies View RelatedAfter finally getting X6 to be stable and usable I have two things I'd like to mention..
First, I've been using a 3rd party file manager called Ztree for years and one of its most wonderful capabilities is to copy paths to the clipboard which alleviates opening/saving frustrations with the typical Windoze Explorer dialogs. Anyway, one of the first problems I noticed with X6 is that Paste no longer works in the Open Drawing dialog, while it worked just fine in X5 and as far as I can remember, all previous versions. I sure would like to get that back.
My second complaint is the File/Export routine and specifically the presets. I do a lot of exporting to PNG and JPG and use multiple presets for fixed size/print resolution image output in both file formats. During the typical export session, I essentially export multiple different drawings all of which are exactly the same size/resolution in CD and in the past (X4 and prior as I recall,) was able to just hit <Enter> when the Export dialog appeared once the preset was set to the one I needed for that session.
In X6 though (and to some degree in X5,) even though the correct preset is listed, CD doesn't appear to recognize it, i.e., the math for the size/dpi conversion doesn't take place which forces me to waste time selecting "Original" or some other preset first, waiting for CD to render the new version, and THEN selecting the conversion preset that was pre-selected when I first opened the export dialog.
I have Lightroom 4 installed but can't get any presets to work.
View 1 Replies View Related