I am in the WHCC Roes software program, creating a postcard. On the reverse side, I want to insert a small 2" x 1" photo. I therefore exported this size from LR3 (Image Sizing, Resize to Fit, Dimensions: 2.0 x 1.0, inches, and I clicked "Don't Enlarge". It didn't work.
View 3 RepliesWhen I'm looking at photos in my Library, I'd like to be able to sort them in terms of size.Â
Â
A photo of 50 k is only of marginal interest for limited upload only. A photo of 15 mg is of great interest. The size tells me that it's at least moderately hi res and that there are probably a lot of pixels involved, and a good print can be made for publication or whatever. But I can't see a way to sort by image size. Is there a way? I'd like to separate a photo with a size of 720 X 480 from a photo with a size of 100 X 75.
when you're deciding what size to make each photo, there starts to be a point where there is a noticeable lost of visual quality. what feature in any program (doesn't have to be adobe) can automatically enlarge the size up to a point where the visual quality is still good?
Â
doing it manually for each photos is too inefficient.
How can I make mini photos? I don't want several of one photo. I want one of several photos and mini photos of components in a photo, such as a face. I'm a very inexperienced Photoshop user.Â
View 3 Replies View RelatedI'm trying to essentially make a mini frame generator in autolisp. Namely a function where one can enter the width, height, thickness, how many bays, how many day light openings, and then autocad draws the frame. Right now I'm just trying to get two settings to work with each other - and upon opening autocad the function works initially but then when I try to switch to the other setting it does not work. I felt like this was a global/local variable issue.
View 9 Replies View RelatedI use Photoshop CS6 and Lightroom 4 mainly as I am a photographer. It involves both programs live and some huge PSD files kicking around. I am thinking of getting the high end new i7 with 16g and an SSD.
View 3 Replies View RelatedWhat file settings and image sizing (eg- quality, resolution, colour space, pixels etc) should I use to upload photos to my webpage? I dont want to use the web galleries tool.
View 6 Replies View RelatedI recently upgraded to a new Mac mini. I migrated from a Macbook Pro. It seemed to work fine at first but now I'm getting this error: Â
Â
Lightroom sees them fine until I try to import. It's not the card as I'm able to import them into the Macbook with no issues. Could this be a licensing issue with the new Mac mini?
I've created a collage to place on the front cover of my book. It is a JPG file about 6700 pixels wide and 768 px high. When I drop it onto the front cover, it shows only a small fraction of the photo and there is no way to "shrink" the photo.
Â
How can I display the entire 6700 x 768 px photo on the cover of my book?
I have entered Template Browser in LR4 and I am unable to exit it so that I can resume printing A4 size photo's.
View 4 Replies View RelatedI have a Canon 60D, and it has all the different color profiles such as Landscape, Portrait, Standard, Faithful, etc. I noticed that the pictures I took look amazing in the camera's monitor, but when imported into Lightroom they looked kind of washed out, the colors were not as vibrant and the contrast was a bit flat. But rencently I discovered that in the Develop module there's an option for Profile, which by default is set to Adobe Standard, but it's a drop down list that also has all the camera's profiles, and once I select the one I used when taking that photo, it looks excellent, very similar to what I see in the camera.
Â
It's not a terrible deal to apply it to one, then copy settings, go to grid, select all the photos taken with the same profile and then paste settings, but is there a way that Lightroom (4.2) can import the profile that was used for the photo and also apply it, instead of using Adobe standard by default?
I love LRs ability to create great watermarks. Only thing, they seem to come out (from DNGs) at about 3 mb apiece (quality setting at 79)Â - super large. So I clicked the box to limit file size, and I chose 300k (for web), and it says "could not create a jpeg that met your limit".
View 5 Replies View RelatedI would like ot make a smart fodler in LightRoom that will capture all my Instagram photos in one place. The parameter that seems obvious to me is the size 2048x2048.
Â
I cannot see any way to make this an attribute in a smart folder, I am new to LightRoom.
I'm trying to take a black and white photo of a flower and ONLY make the flower in color.. like a layer.... I've tried using the adjustment brush, but that doesnt work well..
View 2 Replies View RelatedI'm trying to find the best way to plan my workflow while I'm on the road. While I'm away from home, I will be uploading and editing photos to my laptop in LR and then when I'm home, I would like to store the files on my external harddrive, so that I don't eat up so much space on my computer. Would I need to make two libraries for this? One for temporarily holding the images, and then a main one for everything on my external harddrive? How do I go about copying the metadate or edits that I make to each photo to my external drive?
View 5 Replies View RelatedWhen trying to place an image into a new document in photoshop elements 12, I select all-copy-paste the image (or even drag it) over to the new doc created. However, when I do this - the image does not paste in at the same size. It typically shrinks down in size.  Do I have to save the file, close out and then open the new doc and PLACE it in the document in order for it to keep size? There must be a better way to do this. Basically, how can I drag a photo that is 4x6 over to a new doc while keeping the size at 4x6.Â
View 5 Replies View RelatedI am checking the size of a photo as it needs to be as near as dammit to 10MB. this is it in Photoshop So it's 9.92MB. But this is what is shown when I select the folder it's in and to go list view (its the picture at the very top of list) / 1.9MB! Which is correct?
View 5 Replies View RelatedWhen I have an PSD icon set and I want to size a layer to a size that looks good. How do I see the dimentions of that layer so that I can select another layer and make it the same size.
View 4 Replies View RelatedHow do I make a photo sepia and leave an item in the photo the original color?
View 1 Replies View RelatedI have tried numerous times to make my paper size and actual plot size the same. My paper size is 24 x 36 but for some reason it rotates the paper and the output is 36 x 36, every time! When I look at it on the preview, it looks correct but then the paper comes out with a foot of paper at the top of the drawing. I've created new page sizes, etc.
View 9 Replies View RelatedI have Photoshop Elements 10 which I work with sparingly. I would like to outline a section of the photo (a face) and somehow select it to be the whole photo - in other words to get rid of all background elements. I can outline the area with lasso, but do not know how to just save that area. When I save, the whole original photo is saved. I also tried the magic extractor, which really worked to make just the face and crop everthing else out, but it has a white background the same size as the original photo, which means it is essentially a reactangle with a face in it. I am trying to just get the face so I can paste it into a document, sort of like when people put heads on fake bodies. This is for a church newsletter. I have done this with my old Picture It software, but that was on my old computer. I think I should be able to do this with all the gadgets Photo Shop has, but I must be missing something.
View 2 Replies View RelatedMy picture’s original size was 108.2 MB in tiff. After I developed my photo in Lightroom and exported the new image, the file decrease to 50MB in tiff. Why did Lightroom decrease the file size to more than half the original size? Is there a way to increase the exportation file size to that I may develop a large size print?
View 7 Replies View RelatedAfter editing in perfect photo I cannot unstack the edited photo in LR4. The thumbnail shows the number of photos in the stack, but right click/expand stack has no effect. The edited photo is not showing.
View 2 Replies View RelatedIs there any way to join a .jpg photo with a Word doc to form a printable photo? It's for a team photo and I want to add the names under
View 3 Replies View RelatedAfter finally running out of space on my computer I've shifted my photo library onto an external hard drive. I did this outside of lightroom as I did not expect there to be too many complications
Â
There is a general folder named "Photos" and within are the sub folders for the photos. I did a simple drag and drop from my computer to the hard drive and expected Lightroom to simple show the new directory in the folder panel.
Â
What would be the simplest way to re-access the files since moving them to the new hard drive?
I have a prob with the Paper size and the Cell Size not matchng in LR4 using a Sony UP-DR150 printer.
Â
I'm running on Windows home premium 64bit,
Â
i have installed the Sony 64 bit printer driver.
Â
When i print the photo, it prints to the size 4.31 x 3.12 on the 5x7 paper.
I want to create a new page , design and print an A3 size photo in landscape view.What is the size (which means width and height) and resolution i have to set in Photoshop CS6.(I don't find any A3 file size when i open a new file)
View 4 Replies View RelatedI have watched a few videos, on changing image size, in cs6, since when I tried it, the photo didn't change size at all. I could change it to 1 million inches tall, and it will stay the same size. I don't really know what to do. I've tried unlocking the default layer, and changing the canvas size and nothing seems to make this image change size.
I want the image in the picture bigger, am I even doing it right by going under image, and changing the image size, and hitting ok? That is all the tutorials say to do, yet nothing happens for my image.
I have a photo where the orientation is landscape and I would like to make it a 5x7 portrait size orientation. Is there a way to do this without screwing up the entire photo?
View 2 Replies View RelatedI have a photo that I want to change to sepia and print it full A4 size but cant find any info on how to do this.
View 1 Replies View Relatedwhen I was using Elements 5.0 I could open two photos, drag one photo into the other, then resize the photo by selecting it and using the handles. I can't find a way to do this in Photoshop CS3. Is this possible?  Am I missing a setting somewhere? I can drag one photo into another and move it around, but just can't resize it.
View 2 Replies View Related