Photoshop :: CS6 Not Changing Photo Size
Nov 5, 2013
I have watched a few videos, on changing image size, in cs6, since when I tried it, the photo didn't change size at all. I could change it to 1 million inches tall, and it will stay the same size. I don't really know what to do. I've tried unlocking the default layer, and changing the canvas size and nothing seems to make this image change size.
I want the image in the picture bigger, am I even doing it right by going under image, and changing the image size, and hitting ok? That is all the tutorials say to do, yet nothing happens for my image.
View 6 Replies
ADVERTISEMENT
Nov 17, 2007
I'm placing a copyright on a photo but the smallest text size available- 6 - is still way too large. How can I make this smaller?
View 2 Replies
View Related
Aug 28, 2007
i currently have a logo that is 460X440 pixels and 12.17cmsX11.69cms and the resolution is 96 pixels per inch.
i am wanting to change it into a 2cm X 2cm avatar that is less than 6K in size,
how do i do this? everything i try makes the output file about 24k in size.
the reason i am doing this is the forum i regularly post on has a max avatar size of 6k.
View 3 Replies
View Related
Mar 20, 2013
I'm not sure what I did to make this happen or how to change it back, but for some reason when I change the size of an object/line it changes the stroke weight as well. (For example, if I drew an ellipse with stroke weight 2 pt, and then increased the size the stroke weight would be 2.856 pt or some such number instead of 2 pt.) How to change this back?
View 3 Replies
View Related
Mar 17, 2013
I want to change the size of the image in Gimp to 3957x4429 px (67x75 cm) at a 150dpi (the image we have has a 300 dpi.) When i do this in image - print size it keeps changing the width.
The system is not allowing me to get the picture a few cm larger. Is there any way I can overwrite this?
View 1 Replies
View Related
Mar 9, 2013
When I'm looking at photos in my Library, I'd like to be able to sort them in terms of size.
A photo of 50 k is only of marginal interest for limited upload only. A photo of 15 mg is of great interest. The size tells me that it's at least moderately hi res and that there are probably a lot of pixels involved, and a good print can be made for publication or whatever. But I can't see a way to sort by image size. Is there a way? I'd like to separate a photo with a size of 720 X 480 from a photo with a size of 100 X 75.
View 6 Replies
View Related
Mar 24, 2009
Is there a way to change the leader arrowhead size without changing the dimension arrow/tick size?
View 9 Replies
View Related
Nov 20, 2013
When trying to place an image into a new document in photoshop elements 12, I select all-copy-paste the image (or even drag it) over to the new doc created. However, when I do this - the image does not paste in at the same size. It typically shrinks down in size. Do I have to save the file, close out and then open the new doc and PLACE it in the document in order for it to keep size? There must be a better way to do this. Basically, how can I drag a photo that is 4x6 over to a new doc while keeping the size at 4x6.
View 5 Replies
View Related
Sep 23, 2013
I am checking the size of a photo as it needs to be as near as dammit to 10MB. this is it in Photoshop So it's 9.92MB. But this is what is shown when I select the folder it's in and to go list view (its the picture at the very top of list) / 1.9MB! Which is correct?
View 5 Replies
View Related
Jun 5, 2012
How do I make cursor size the same as paint brush size in CS6? It isn't and it makes selecting more difficult. Preferences>cursor does not seem to fix.
View 11 Replies
View Related
Oct 23, 2002
I want to know how to change the size of a layer.
View 5 Replies
View Related
Apr 6, 2005
I'm trying to change the size of a certain object in my image. It's a simple clip art that I got off the web and pasted into Photoshop. What I'm trying to do is select it with the select tool and then resize. None of the resize options I'm using seem to do exactly what I want though. Here's what I've tried:
1) Image -> Image Size -> do my adjustments. This changes the size of the whole image, not the selection.
2) Image -> Canvas Size -> do my adjustments. This changes the size of the canvas and has no bearing on the size of any of the objects within it or the entire image.
3) Select -> Modify -> Contract/Expand -> enter the number of pixels. This changes the size of the selection box, but not the contents within it.
4) Select -> Transform Selection -> do my transformations -> hit enter. This changes the size and shape of the selection box, but not the contents within it.
What do I need to do in order to change the size of a particular object within my image?
View 6 Replies
View Related
Mar 10, 2003
I have 120 picture in 1280x960 and want to change them in 1024x768?
View 1 Replies
View Related
Oct 2, 2013
I am creating a web page using CS6 Photo Shop and DreamWeaver. I want the photos to be 900 px wide and 294 px high. When I do this it distorts the image by making it look short and squat. Is there a way to change the width and height but keep the image looking like the original?
View 2 Replies
View Related
Mar 21, 2013
I'm on a Mac 10.8.2 w/ CS6 13.0.
This is one of the tutorials that seems very straight forward(except for a couple typo's) but when I try it, I'm told the file could not be copied to clipboard because it's too large...however it does appear to paste the car over the bottom photo? Or did it?
"First open one of the shots in PhotoShop and select the entire image by pressing Ctrl-A, then cut or copy the image into the clipboard (Ctrl-X or Ctrl-C, either will do the trick), now close this image ... without saving ! Very important, we don't want to change the original image file, you never know you might need it again in the future.
Now create a new document (Ctrl-N) and just click 'OK', no need to change any of the settings, they are set to the content of the clipboard anyway so I can leave them 'as is'. Once the blank document is there hit the Ctrl-V to paste the first image into place. Time to open the second exposure, again Ctrl-A to select the entire shot, cut or copy the image (Ctrl-X or Ctrl-C) and close this file again (Ctrl-W)... do NOT safe the changes to keep the original image intact !
With this second image closed again I am automatically returned to my new document that already contains my first exposure, just hit Ctrl-C to paste the second exposure on top of this one and I'm halfway done already. The order of these shots isn't really that important, you will be exposing parts of one shot into the second one, which one lies below doesn't matter anyway."
Let's say the screen shot below is workable, if not I'll do it the correct way BUT how do I make the brillant layer masking work from here. Everything I've seen says to select the mask, then select the brush, then type of brush, make sure white is the foreground and black is background and just paint. When I paint nothing happens to my images?
Then I've tried going to File>Scripts>Import as Stacks and this seems to bring them in but w/ transparent layers underneath,
View 17 Replies
View Related
Oct 16, 2007
I am trying to replace the gray sky in one photos with the blue sky from another.
I've just gone through several tutorials but can't seem to figure out how to add more than 1 photo into the layers palette.
I open PS CS3, click on the top menu 'file', click "open", click the photo, click 'open' and the photo appears in the layers palette on the right side.
Then I repeat the process with a 2nd photo, and instead of being added in the layers box on the right as a 2nd photo, it replaces the first photo.
If I click the little box at the bottom 'new layer', I just get the blank checkerboard opacity.
How can I get 2 photos to open in the layers box?
View 1 Replies
View Related
Mar 13, 2009
I have no clue about photo editing, graphic design, its out of my entire scope. I had hired a grahic designer who has since flaked out on me leaving me hanging high and dry. here is my problem- I have a small (hobby mainly) mineral makeup "company" that I am putting online for my small customers, I had my photographer take the "main" foundation picture and then I was able to have her then change that same photo with my 10 different shades of foundation color- essentially its the same photo except the color/shades are different to correspond with my makeup line.
however, I need 5 more done. I have a jpg of the colors from the manufacturer and of course my original foundation photograph
how on earth you change the color on my foundation to add a new color without taking all new pictures.
View 2 Replies
View Related
Jun 2, 2013
When changing brush size in CS6, I've noticed that it is has granular resolution from 0 pixels up to around 500pixels, incrementing in size very slowly. However, above 500 pixels it increases in size very rapidly, jumping to 800, 1200, 1500 and then into the 2000s.
As most of the photos that I work on have a high pixel count I find that my ideal brush size is between 400 and 1000, occasionally I use it at around 100 pixels, and occasionally at 2500.
Is there any way of changing the scale of the brush size so that it allows greater sensitivity in the 400 to 1000 range?
View 4 Replies
View Related
Jun 17, 2011
i have used photoshop for years now. However, I still have CS3 or 4 still. Anyway, my brackets ( [ ] ) aren't changing the brush size any more. Instead they're changing the opacity. I can't figure out how to change it back. I desperately need it to change my brush sizes again. It takes way too long doing them manually ;)
View 9 Replies
View Related
Nov 8, 2011
II need to cut and paste an image from one photoshop doc to another. This I can do just fine, but when I do, it resizes the image I pasted and makes it smaller. Since I'm wokring with scans that need to retain their exact size, this is not good.
-Also, the piece of the doc I'm cutting from is a little bit bigger than the 8..5 x 11 letter size doc I'm pasting into.
View 3 Replies
View Related
Oct 3, 2013
I have a photo 36" x 24". I have cropped to 18.5 x 12.5" yet the document size remained the same. Now when I go to print on 13" x 19" paper, only a portion prints because the photo is too big. I shouldn't have to "scale" as then I have no way of confirming that it really will print to the crop dimensions.
Since upgrading to CS6, I have had issues with how the crop is done. For example, why when I open a photo in CS6, the crop tool is already selected by default?
View 4 Replies
View Related
Apr 24, 2009
I created a 12 X 12 composition - I would now like to send it out to print at 8 X 8 -
View 6 Replies
View Related
Nov 24, 2006
I just switched from the GIMP and I am not accustomed to some of the ways in Photoshop. I wanted to ask how to change a layers size only. I don't want to change my whole images size, I just want a part of the image changed. I've been using Image - Image Size to do this,
View 2 Replies
View Related
Feb 21, 2013
Theres a screen in Photoshop where you can change size of a picture from large to medium to small by sliding a scale. I found it once but now cant find it.
View 2 Replies
View Related
Jan 21, 2014
I have adobe photoshop elements 7 and I am wanting to make my pictures be maximum 200kb and 72dpi, how do i go abouts doing this?
View 3 Replies
View Related
Oct 27, 2008
the color makes all the difference in the world to weather you want to buy the coin or not. We use a Nikon to take the pics - Pics come out great, the colors looks like actual coin when viewing in photoshop and in the XP viewer and when we ever have to print the pic. Here's the problem, when we go to save for web its changes the color drastically. A penny that once had a red tone to it now has a brown tone. I've read all over the place for ways to fix it and we've tried them all. Changing the monitor color profile, converting the profile, etc. I understand that everyone's monitors are different and everyone is gonna see it differently anyways, but it would be nice if the pic would like the same on our computer vs the website. It seems like when we first starting do this several yrs ago we didnt have this problem. Has things changed within the program and/or the web to have made these changes happen? Is this something we are gonna have to deal with? We dont have the time to adjust every single picture to make sure the save to web looks right.
View 3 Replies
View Related
Aug 28, 2005
I need to change a photo into just four colours in preperation for producing a litho, this will allow me to have an image for each seperate colour, that when each colour is printed on the same paper, it makes up the final image, a bit like screen printing.
If you try the 'cutout' filter on a picture and adjust the amount of levels to 4, you will see the sort of thing I am trying to produce.
What I intend to do is once the image is seperated, create 3 other copies, then delete all unwanted colour sections, minus the colour I need for this particular part of the picture.
I have tried by converting the image to "indexed colour" and selected black and white, then entering 4 colours here.
This does give me 4 colours, however when I try to just select one of the colours and remove it, it looks like there is an underlying colour, i.e this colour selected is actually made up from two of the colours, as if it is mixed.
View 2 Replies
View Related
Nov 5, 2008
it came with my CS3. My OS is Windows XP. I have 1 G of RAM.
I am interested in changing a photograph into a flat graphic image like clip art. I do not know what it is called and so I don't know how to look it up for directions. But I think it must be possible as I have seen someone do it without permission to a sample of my artwork. I assume they took a photo of the art and then converted it some way to a graphic.
I thought this might be an affect one can use on a photo, but again, I don't know what the right terms are.
View 1 Replies
View Related
Aug 29, 2013
I am trying to work with some artists in mexico with their weaving. We are using elements 11 on vista 7. We would like to change colors in a piece to see if they are pleasing to the eye. Is it possible to change colors thoughout the whole piece at once? Using a brush to paint over each and every area would be so time consuming as their work is quite intricate. If this is not possible on Elements does Adobe have another software that would accomplish this task.
View 3 Replies
View Related
Jun 19, 2013
With CS6 i loved the addition to combine vector layers into 1 new vector layer but when i do this in PS CC and then try to enlarge it it only enlarges the first shape.
Example:
I create 3 squares, vector shapes, i cmd+E the layers to combine them, and then i want to enlarge the new shape..what happens is, only 1 square becomes larger..
View 2 Replies
View Related
Sep 4, 2013
It's a bit hard for me to word, but when I change my canvas size I want my adjustment layers to have black additional canvas added instead of white.
View 2 Replies
View Related
