I am creating a web page using CS6 Photo Shop and DreamWeaver. I want the photos to be 900 px wide and 294 px high. When I do this it distorts the image by making it look short and squat. Is there a way to change the width and height but keep the image looking like the original?
View 2 Replies
I'm baffled. I do 99.9% of my photo work in Lightroom and then export to jpg. On the rare occasion when I need to remove something from a photo (a fly or leash), I have been using PSP version 9 because I already have it.
However, this morning I opened an 8 Mb jpgs file, did my editing and just saved it (no save as or resizing), and now the file is only 2 Mb.
What the heck? [URL]....
I know how to edit the pipe part properties to change a pipe from the size indicated in my parts list to another common size for the particular material specified. However, I've run into a non-standard size that is not in the dropdown menu, how can I add another size to the list?
Basically, I need a 1.5" on the list in the attached screep cap.
I am trying to change the sizes of markers individually. When I change the marker of one, it changes for all of them. I think this has to do with the point groups. I am able to add all points to a new group but I cant specify which markers i want in that group.
View 2 Replies View RelatedI am editing photo's of documents and I want to make them all the same size after cropping so that when combined into a single pdf they will all be the same size.What is the best way to set the crop feature so my photos will all be the same size as the original paper document they were copied from?
View 3 Replies View RelatedI am new to Lightroom. When I export a group of photos some are around 3000x4000 and others are around 6000x8000.
These larger sizes will not upload to my Picasa Web Albums. Why are they different sizes? Some are only taken on my iphone and are the larger size and others are on my SLR and are the small size.
I scanned a photo in to be edited, once I edited it when it comes to printing it wont come out the same size. My printing options are all about different frame sizes to put the photo into.
So I tried creating a new document where I set the size in centimetres, but when it comes to print how come I cant seem to get the option to print that size.
problems with the Export to JPEG dialog.
1. It does not show the original file size. At one time I used this as a cue to see if I had forgotten to resample.
2. After the installation of version 16.3, the displayed compressed file size is no longer accurate. It varies from perfect to reading 25% too high.
I have a preset in Lightroom set to export photos with the long-edge at 900px in length. Whenever I use the resize feature, the photos that result have horrible noise and I don't know what to do about it. I can export the images at full size without any noise, then use Photoshop CS5 to resize the images and still have cleaner photos.
Here's an example.
The following export preset it set as such:
- Export as JPEG
- Quality = 100%
- DPI = 300
- Resize to 900px on long-edge
The first photo is exported via Lightroom 5 with the above settings, then directly uploaded to Imgur.
The second photo only has the Resize feature disabled in Lightroom. It was then resized to 900px on long-edge in Photoshop CS5 and the uploaded to Imgur.
The only difference between these two photos is which program was used to shrink them down to 900 x 600px.
Here is link to the referenced photos: [URL]
What do you think could be causing this? Since the only difference between the photos is which program resized them, all I can think is that it's an LR5 issue...
I have watched a few videos, on changing image size, in cs6, since when I tried it, the photo didn't change size at all. I could change it to 1 million inches tall, and it will stay the same size. I don't really know what to do. I've tried unlocking the default layer, and changing the canvas size and nothing seems to make this image change size.
I want the image in the picture bigger, am I even doing it right by going under image, and changing the image size, and hitting ok? That is all the tutorials say to do, yet nothing happens for my image.
I'm on a Mac 10.8.2 w/ CS6 13.0.
This is one of the tutorials that seems very straight forward(except for a couple typo's) but when I try it, I'm told the file could not be copied to clipboard because it's too large...however it does appear to paste the car over the bottom photo? Or did it?
"First open one of the shots in PhotoShop and select the entire image by pressing Ctrl-A, then cut or copy the image into the clipboard (Ctrl-X or Ctrl-C, either will do the trick), now close this image ... without saving ! Very important, we don't want to change the original image file, you never know you might need it again in the future.
Now create a new document (Ctrl-N) and just click 'OK', no need to change any of the settings, they are set to the content of the clipboard anyway so I can leave them 'as is'. Once the blank document is there hit the Ctrl-V to paste the first image into place. Time to open the second exposure, again Ctrl-A to select the entire shot, cut or copy the image (Ctrl-X or Ctrl-C) and close this file again (Ctrl-W)... do NOT safe the changes to keep the original image intact !
With this second image closed again I am automatically returned to my new document that already contains my first exposure, just hit Ctrl-C to paste the second exposure on top of this one and I'm halfway done already. The order of these shots isn't really that important, you will be exposing parts of one shot into the second one, which one lies below doesn't matter anyway."
Let's say the screen shot below is workable, if not I'll do it the correct way BUT how do I make the brillant layer masking work from here. Everything I've seen says to select the mask, then select the brush, then type of brush, make sure white is the foreground and black is background and just paint. When I paint nothing happens to my images?
Then I've tried going to File>Scripts>Import as Stacks and this seems to bring them in but w/ transparent layers underneath,
I am trying to replace the gray sky in one photos with the blue sky from another.
I've just gone through several tutorials but can't seem to figure out how to add more than 1 photo into the layers palette.
I open PS CS3, click on the top menu 'file', click "open", click the photo, click 'open' and the photo appears in the layers palette on the right side.
Then I repeat the process with a 2nd photo, and instead of being added in the layers box on the right as a 2nd photo, it replaces the first photo.
If I click the little box at the bottom 'new layer', I just get the blank checkerboard opacity.
How can I get 2 photos to open in the layers box?
I have no clue about photo editing, graphic design, its out of my entire scope. I had hired a grahic designer who has since flaked out on me leaving me hanging high and dry. here is my problem- I have a small (hobby mainly) mineral makeup "company" that I am putting online for my small customers, I had my photographer take the "main" foundation picture and then I was able to have her then change that same photo with my 10 different shades of foundation color- essentially its the same photo except the color/shades are different to correspond with my makeup line.
however, I need 5 more done. I have a jpg of the colors from the manufacturer and of course my original foundation photograph
how on earth you change the color on my foundation to add a new color without taking all new pictures.
the color makes all the difference in the world to weather you want to buy the coin or not. We use a Nikon to take the pics - Pics come out great, the colors looks like actual coin when viewing in photoshop and in the XP viewer and when we ever have to print the pic. Here's the problem, when we go to save for web its changes the color drastically. A penny that once had a red tone to it now has a brown tone. I've read all over the place for ways to fix it and we've tried them all. Changing the monitor color profile, converting the profile, etc. I understand that everyone's monitors are different and everyone is gonna see it differently anyways, but it would be nice if the pic would like the same on our computer vs the website. It seems like when we first starting do this several yrs ago we didnt have this problem. Has things changed within the program and/or the web to have made these changes happen? Is this something we are gonna have to deal with? We dont have the time to adjust every single picture to make sure the save to web looks right.
View 3 Replies View RelatedI need to change a photo into just four colours in preperation for producing a litho, this will allow me to have an image for each seperate colour, that when each colour is printed on the same paper, it makes up the final image, a bit like screen printing.
If you try the 'cutout' filter on a picture and adjust the amount of levels to 4, you will see the sort of thing I am trying to produce.
What I intend to do is once the image is seperated, create 3 other copies, then delete all unwanted colour sections, minus the colour I need for this particular part of the picture.
I have tried by converting the image to "indexed colour" and selected black and white, then entering 4 colours here.
This does give me 4 colours, however when I try to just select one of the colours and remove it, it looks like there is an underlying colour, i.e this colour selected is actually made up from two of the colours, as if it is mixed.
it came with my CS3. My OS is Windows XP. I have 1 G of RAM.
I am interested in changing a photograph into a flat graphic image like clip art. I do not know what it is called and so I don't know how to look it up for directions. But I think it must be possible as I have seen someone do it without permission to a sample of my artwork. I assume they took a photo of the art and then converted it some way to a graphic.
I thought this might be an affect one can use on a photo, but again, I don't know what the right terms are.
I'm placing a copyright on a photo but the smallest text size available- 6 - is still way too large. How can I make this smaller?
View 2 Replies View RelatedI am trying to work with some artists in mexico with their weaving. We are using elements 11 on vista 7. We would like to change colors in a piece to see if they are pleasing to the eye. Is it possible to change colors thoughout the whole piece at once? Using a brush to paint over each and every area would be so time consuming as their work is quite intricate. If this is not possible on Elements does Adobe have another software that would accomplish this task.
View 3 Replies View RelatedWhile designing an album cover...
Album booklet to be printed in CMYK, obviously. I have an RGB photo, mostly black. After converting it to CMYK and using the channel mixer to return to the original brilliance, the black is CMYK 100-92-85-98. This is obviously too long of a black... way too much ink... using thin white fonts over it prints terrible, etc. How do I adjust the black of the image to something more favorable to printing, like 60-40-40-100?
How do I change a colour photo to black and white? I'm embarrassed to ask this but I've spent about an hour going through everything and even looked at the help page. I bet its so simple but I just cant work it out.
View 5 Replies View Relatedsee the same image is used in all color variations of this product. I would imagine they shot something with contrasting dual colors since it would be harder to mask the solid white or black but my question is how do they change the color from black to white or visa versa without loosing any shadow integrity in the process?
View 3 Replies View RelatedI have a landscape photo and I want to change the orientation to portrait photo. I want to save that file to order a enlargement, to put it on my portrait frame. How I do that? I know you can do it for printing, but I want to save the photo as a portrait. I have Adobe Photoshop Elements 11.
View 1 Replies View RelatedI need to soften the outline of a girl in a photo without changing the background. I have tried the Modify Edges tool in the selections menu, but the results of the feathering command do not show up on the photo.
View 2 Replies View RelatedPHOTOSHOP: Changing the background in a photo within a custom-drawn mask
View 1 Replies View RelatedCan anyone tell me how to change a photo to black and white but leave a handband in the photo in color? I just can't quite figure it out!
View 4 Replies View RelatedI am using PSE10 and I have just upgraded from lion to mountain lion 10.8.2. Previously when I clicked "write keyword tag and properties info to photo" it seemed to just do that. Since the upgrade to mountain lion when I click 'write keyword tag and properties info to photo" it also changes the date the photo was created to the date the info was written to the photo .
How I can get it to write the keyword info *without* changing the date the photo was created?
The old photos were scanned in at 300 dpi. Many of them were then cleaned up (spots and scratches removed, etc.) using Microsoft Digital Image Pro 10 (which we also did on previous projects). My wife then began creating her project essentially using all of the VideoStudio defaults. She added a custom pan and zoom to every photo so that the slide show has some motion, and the person or object of interest in the photo gets enlarged and emphasized.
Problem 1: as some of the photos move, there is a visible twitch or judder--not sure what word I should use to describe it. It's like the picture jiggles a little as it moves. The problem is not in the burn, the DVD player or television, because you can see it happening when you watch the preview of the project in the software, edit mode. It seems to be random, I cannot discern a pattern to which photos, where on the timeline, which transition, etc., is related to the issue.
Problem 2: my wife created this project for a 4:3 aspect ratio TV, so the crop box that was used for all of the custom pan and zoom was 4:3. I would like to create a new version of the project, with all of the photos re-cropped, re-zoomed and re-panned using a 16:9 box. The problem is, I cannot figure out how to delete or un-do all of the existing 4:3 panning and zooming. I have tried opening the program with the 16:9 box checked, then opening the project file, then deleting photos from the time-line, and re-linking to a new copy of the same photo. When I open the pan and zoom box for the photo, it has a 4:3 aspect ratio crop box! Note that if I start a new project and drop the same photo on the timeline, I do get a 16:9 box for pan & zoom. So it seems that 4:3 is associated with the existing project, and I can't figure out how to get rid of it. I really don't want to have to re-create the whole thing from scratch. Is there a simple way to be able to re-do the pan & zoom at 16:9?
I tried selecting all of the photos on the timeline, right-clicking, then choosing auto pan and zoom, to see if that would re-do it using a 16:9 crop box (which could then be customized). No joy, it again used a 4:3 box.
Can you change the color of one object to another color of a different object in the same photo?
View 3 Replies View RelatedI would like to be able to change my screen color. It opens in white. For a lot of my work it would be easier for me to see what I am doing with a darker screen color. Can I change the screen color from white to a darker color.
View 9 Replies View RelatedI am designing a logo of the sun rising over the earth from the perspective of earth orbit. The general look will be of the sun(looks like a star) illuminating a narrow crescent of the earth. I am working on a picture, trying to adapt it for the logo. I need to change the white sunlight to be yellow/red - can't seem to isolate the colors from the mix of earth colors or black background colors they mix with. Another thing I need is to use a white background instead of the black background of the picture taken from space. Is there a way to convert all the colors that are a mix of the black background and something else to be changed to be as if the background was white?
View 8 Replies View RelatedI fully understand how to change a picture into a vector in Ai and to be clear, I don't want a silhouette or a black and white image, I want to use the picture. I have had good success with using the high fidelity option to change the pic and it looks great. The problem is, I am using a cutout and when I use the high fidelity option it fills the background in as white instead of a transparency. I've even tried to hit the ignore white button but it does not work. I've resorted to then opening it in PS and removing the white and saving as a PNG24 but, when you then open in Ai to work with again it's then again pixelated.
View 10 Replies View Related
