When I make changes to a raw file using the graduated filter and then edit the photo in photoshop the graduated filter changes do not carry over to photoshop but all the other changes do. Whats up?
View 6 RepliesAll of a sudden, when I use my graduated filter while I am developing, it does not have any effect. I can see the lines, it appears to be working, but If I try and adjust the exposure, it does the whole photo, not just the section that I am trying to filter.
View 2 Replies View RelatedWhen I'm trying to use the graduated filter tool in 3.5 I don't end up with the lines or the marker to adjust it after I've applied it, the line and marker don't show up while I'm applying the filter and aren't there afterward either. Is there some place I need to select that as how it's shown? Also, I have a windows 7 laptop that meets the requirements for running lightroom but I'm having trouble with it not running very fluid-ly. That is if I move a slider to make an adjustment it doesn't apply it while I'm doing that it takes quite a few seconds and then applies it, which leaves me really all over the place trying to make fine little adjustments. It takes it's time to load photos and such which really isn't a big deal to me but for the little movements of the sliders or the curves I really would like to see what it's doing as it's doing it. If I had a more powerful laptop (or desktop but at this stage of my life I prefer laptop) would that improve that?
View 3 Replies View RelatedI scanned an old, somewhat degraded photo, The horizontal center (i.e., top to bottom between left/right edges) is faded, getting better towards the left/right edges.
Is there a way to apply a graduated filter so that I can increase make adjustments to the center, fading out towards the right AND the left? That is, the effect normally graduates towards an edge; I want it to be strongest in the center and fade towards both edges.
If you see the face iv used a smooth brush and its bringing out all these noise spots. If i try to darken a background its totally unusable. Iv never had these presets and brushes do this but the last 2 sessions iv had massive issues, Its happening on pics which i wouldnt think would have issues and have never had issues before. Lightroom 4 had none of these problems.
View 3 Replies View RelatedThis is a weird one, but I am new to lightroom. I have these pins on my image, which are all grey, and when I click on them, they jump to another image. I can't seem to figure out what is happening here.. I think they were created when I add a graduated filter,,,
I cannot delete them because when I click on them they jump to a diffeferent image... It's super annoying trying to add graduated filters when you keep jumping to a different image...
The problem I have is with the graduated filter in the develop module of LR 4.1.
I have installed CS6 and LR4.1 on both my new Macbook Pro and Mac Pro.
When using the Macbook Pro the the pin marker appears as it should.
On the Mac Pro no pin marker appears but the rest of the action is performed.
I pasted the same graduated filter arrangement into several hundred action photos. I then slog through them in capture order, nudging them one way or another depending on crop and subject. On the next photo, the first time I click and drag --the filter NEVER moves! I must release and reclick to get it to move. This becomes highly annoying after a while. Enough so to write this.
View 4 Replies View RelatedUnable to see the lines of the Graduated filter tool or the outlne and handles of the new Radial filter tool. They were visible when I first installed Lr5 and used them on several photos
View 4 Replies View RelatedIs there an Adjustment Tool or Graduated Filter Tool in Camera Raw for Photoshop Elements 12?
View 2 Replies View RelatedLR 3.3 with ACR 6.3
After selecting "Edit in CS5" I do not get the dialogue box asking if I would like to apply Lightroom adjustments.
Image opened in CS5 includes some adjustments from the Develop Module, but not the Transform Lens Corrections that I had applied.
I'm using Lightroom 4.4 on Mac.
Having an issue where all brushes and graduated filters are adding a warm yellow tint, no matter what the color settings are for the brush. The tint persists, even if I convert the image to B&W within Lightroom.
Is there any way to "carry on" a lasso selection once you have released it?
What do I do if I make a mistake with the lasso tool right at the end of a big lasso? How to I delete the little bit it messed up and carry on where I left off with the selection?
Also, how do I "add" to a lasso selection? Say I have made a magnetic lasso selection and it selects my t shirt ok but cuts across the neck line of my t shirt (thus cutting off my head) because it cant tell the difference between the background and head. How do I then use the manual lasso to cut around my head and join the two pieces together into one selection?
Is there a way to have mtext content carry over into a second mtext box when it overfills the first mtext box?
View 4 Replies View RelatedI have a random question. I have a layer that I want to set in front of a background image, and I want the edges of the top layer to be transparent. However, I don't want it in some kind of blocky, obvious way. Something more like an outer/inner glow to where it's smooth and gradual, but transparent instead of with a color. I sidestepped the issue once before by giving the layer a white inner glow and making the background white as well so that it LOOKED like the desired effect, but now I can't really cheat like that.
View 2 Replies View RelatedInventor 2013....Ive assigned appearances (wood etc) to my model but they dont show up in an ISO drawing view when choosing "shaded". It shades it but not the appearances ive chosen.
View 1 Replies View RelatedI have made a foreground to background linear graduated screen in PS6 / windows xp and although the color selector shows black, foreground shows black, and background shows white, I get an almost rainbow like assortment of various color bands across the page. I have made the screen with the rectangle tool and also with a new fill layer and get the same results.
I try to change the color... red, green, pink just to see what happens, but nothing changes. It also prints the same way. I put a second new fill layer with a pattern fill to hide the effect, but the page still has faint bands of the wrong color running across it. Any ideas on this issue?
I have a model part with colors assigned to different features but they do not carry over to the assembly model. The assembly first came up as all grey when our computers were upgraded to Windows 7, I have been playing with it and got some of the color back. I am new to Inventor and not familiar with how the colors work.
View 4 Replies View RelatedI'm trying to make a curve that follows a path that changes direction. I've tried to carry the zigzag effect accross line using the compound path option, but the curve double in on themselves and don't make a continuous line.
View 1 Replies View RelatedMy current task:
1. I have two lines, they represent a winding footpath of varying width, I would like to create a centre line between the two (not just eyeball it in)
2. I would like the centre line to be graduated every 5m, with parallel lines that join/cross the shoulder lines
If the first task proves to difficult don't worry about it, I just need to know how to graduate the lines.
I thought of using the divide tool, but it divides the line into equal segments, can I nominate how long those segments are
I have Designer Pro 7. Is there a way to get the outline of an object to take on the graduated fill transparency of an object? The line goes transparent with the object's fill when a linear transparency is applied, but remains opaque with a graduated one. I understand that I could turn the outline into an object and then apply the transparency but if I have to edit the object later, I would have to repeat the process.
View 4 Replies View RelatedI am using the trial of LR5. I have made some adjustments with the Radial Filter. When "opening as a smart object in CS5," the radial filter adjustments do NOT show up. Crop does, basic exposure adjustments, but no radial filter.
Would it show up in CS6? I do not want to go to CC.
I tried to use the lens flare filter in Photoshop CS6.While the lighting effect is interesting, it introduces ugly artifacts like blue or orange blobs (which are supposed to be the reflection of the diaphragm, but do not look anywhere close to that, but instead are just cheesy looking blobs of color).
In the "movie prime" setting blue lines are added which have nothing to do with lens flar.On top of it, the preview is about the size of a stamp. Any way to use the filter without getting these artifacts, or is it - what I assume - just a useless toy filter, that has probably been dragged on for years and years because it's always been there? What do you use to create a lens flare effect? Are you just building it from scratch with brush work?
camera raw filter does not show up on the filter drop list on CC. I am trying to determine why this is the case. So far everything else seems to work.
View 2 Replies View RelatedPhotoshop CS5 already in 32-bit mode; Lighting Effects filter not showing in the FIlter Menu.
View 38 Replies View RelatedSuddenly while working on may images in LR5, doing all the usual with Development module I've realised that Radial filter effect is not being exported to CS5; all others ark: healing, spotting, grad filter, and brushes are ok.
View 3 Replies View Relatedwhy not appear filter gallery (fade out) in filter menu
View 2 Replies View RelatedI do not have the Camera Raw filter in my filters menu, and I've just updated Photoshop this AM.
View 1 Replies View RelatedI've deleted my PS preferences and restarted, and I cannot get this filter to do what is was just doing a day earlier. It doesn't matter what the foreground/background colors are, nor does it matter what the resolution of the file is. I've experimented with every variable. The filter effect changes the filled layer to a solid color of the current foreground color. No lines, dots or circles at all.
I'm trying to make lines in a filled layer, or a rasterized text layer.Adjusting the sliders has no effect at this point, but the other Gallery filters DO work, oddly enough.
I've used this filter effect many times over the years, and it just started acting wonky. This is PS CS6, on Mac OSX 10.8.5.It seems to be unpredictable or temperamental. Is there a reasonably-priced plugin that will create lines that are completely adjustable?
I have Photoshop CS4 running on a 8 gig Vista 64 bit system. When I click on Filters, there is no Extract Filter. I did a search prior to posting and saw some threads talking about not moving files, icons etc from their original folder. I am un sure if anything has been moved. However, when I click on Filters, they all seem to be there (at least not greyed out), EXCEPT for the Extract filter. Any help would be apprecited and if you let me know where the filters should reside I can make sure they are in the correct location.
View 3 Replies View RelatedI have a big collection of scanned photos many of which are in b&w. Unfortunately they have not all been tagged, so now I'm looking for an easy way of finding all my b&w images.
Can this be done in LR?