I have a model part with colors assigned to different features but they do not carry over to the assembly model. The assembly first came up as all grey when our computers were upgraded to Windows 7, I have been playing with it and got some of the color back. I am new to Inventor and not familiar with how the colors work.
View 4 RepliesI quite often import hardware models downloaded form various mfg or supplier websites. McMaster Carr for example provides a great deal of hardware models. While they offer native formats for SW they do not do this for IV (not many places do)
Since the [imported] models often open up with default properties, I change the material to something that closely represents the actual hardware or item. In some cases, there are certain portions of the item that are in reality colored or textured differently and I sometimes want to duplicate that for aesthetics and a more accurate view for people that use my assembly files.
In SW, it was always real easy to select just a face (regardless of whether the surface was part of an entire part, a feature, an imported solid body, etc. I could always change the properties of just a face or slection of faces. Since it was a standard pc of hardware, I had no concern about updates.
I have a part file that contains two imported solid bodies. If I select just a single face and try to change the color of it, it changes the entire part. Not what I want.
My part color is yellow. In the assembly It shows as gray.
I cant seem to get it to change to match the part color. I used to know why this happens and knew how to fix it but seem to have forgot. How do you get this to work?
I also recently loaded 2014, but had the same problem with 2013, so its not a release issue.
Is there a way to have inventor make each part in an assembly have a different color? I like to work in assemblies like this because it is easier to tell the parts from each other. It's just time-consuming to go through and change everything if the assembly was designed with realistic colors. I am thinking there might be a macro for this, but I don't have much experience with macros so idk.
(extra brownie points if the method has the capability of reverting back to realistic colors)
Inventor 2014
HP Pavilion dv6t-6b00
Intel Core i7 2670QM
AMD Radeon HD 6490M
8gb RAM
Windows 7 64 bit
3Dconnexion SpaceExplorer
I have just recently upgraded to 2013.I have one color in particular that use dto be grey - now it is red. I have repaired the appearance so it looks correct in a part. I was able to save this backto the library, overwriting the original. This is all good. I am unable to find out how to push this updated appearance to all parts in an assembly. I used to be able to do this with the update styles tool.
View 1 Replies View RelatedIn 2012 (and earlier) you rotated the texture in Style Editor. This was limited vs the new method.
I have parts with lots of faces and need to rotate all the faces at the same time, like 2012.
Also, I need the changes to be updated in all iparts, whereas at the moment the Adjust only seems to affect each one. Again, much less limited, but I need the option to update all at once too.
I am tryiing to "purge" a local appearance in a part. From the tools>Appearance, I want to delete the Knurled (Coarse), but the delete is greyed out.
I cleared the appearance overrides, but it is still greyed out. Here is a short video of what I have tried.
The reason I am going thru this excersice it to remove the knurl.bmp that shows up in by vault browser... watch the end of the video.
I have a part (several actually) that I made using the mirror command. I made these in 2012. When I converted to 2013 and set up my new appearance freindly materials, I changed the appearance for my 201 S/S matl to "Stainless Brushed". The first image is of the derived part which is stuck on a "Steel" appearance, the second image is of the base model which is correctly displaying the "Stainless Brushed" appearance. I tried playing around with the appearance overrides and I can't seem to get it to update. My assembly looks like **** with the different appearances.
For chuckles sake I'll also mention that every time "appearance" appears in the above paragraph I typed color first and corrected it.
I was wondering if there is a way to change the appearance of a face in a weldment assembly environment. I have a weldment which in the machining process a part of weld bead as well as a portion of one of the components is machined down (spot faced) and I need to change the appearance of those face to polished, but it doesn't let me do that?
View 3 Replies View RelatedWhenever I mport a part it has the welding texture applied to it. Where can I change it to so I don't have go around and select the faces to clear them. Changing the material has no effect on removing the texture.
View 3 Replies View RelatedHow can I scale the mesh appearance on a part body. The holes are appearing too big.
C1
Inventor Professional 2013
Vault Collaboration 2013
Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies View RelatedI`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
I would like to simplify this assembly into one seamless part for FEM calculation:The assembly consists out of parts that, in reality, will be welded together. Due to their form, there is no way to place them exactly onto each other, therefore there are slight gaps between the parts:
Now when I try to merge the assembly into one part via "simplify" --> "create simplified part" and choose "single solid body with seams between planar faces merged", Inventor does not fill these gaps (even though it displays only one part in the bottom right corner of my window). Unfortunately, the remaining gaps brings "contact" problems in the FEM simulation.
how to close the gaps and really merge the assembly into one part?
New user 2014
Part created in assembly does not update to part file.
I have a part that has protrusions. When i mate that part up to another part that second part needs to have cutouts/holes to receive those protrusions.
i mainly use it in sheetmetal parts. and use the rectangular protrusions on de contour to mate up with corresponding cutouts in the other sheet. this works with positioning and also makes for a nice weld spot/area.
But also for making holes to accommodate a mold pin used in custom punch dies. I want the intervening part to receive a corresponding (propperly tolleranced) hole automatically. Much like a bolted connection does.
same for parts like circlips. i want them to automatically generate the seat in the part it's mated to. Rather than using the axle generator.
Ofcourse one can place the parts and do an in assembly interpart projection and go from there, but i want the part to generate the (predifined) modification to the other part. It would save time and also reduces problems as the parts are moved about or even removed.
I have an assembly with 10 parts in it. We use many assembly features at the assembly level (Revolve cut, Extrusion cut..etc). How to find the mass difference of each part by comparing at its parts level and its assembly level.
View 1 Replies View RelatedI have a two part duct fire damper assembly. The IDW has the combined two part assembly, which I know how to turn the CoG on, so that it can be dimensioned. The problem is each piece will more than likely be hoisted separately so I would like to show the CoG for each piece, not the combined master assy.is there a way to do this?
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
If I want to find part which is inside another part or assembly, which means no matter how I turn camera, I always cannot see that part.
Does inventor has this function? Or is it possible to develope by .NET API?
I can't seem to find how to use the Inventor 2012 API to project an entire sketch profile from one .ipt to another .ipt file from within an .iam file.
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
Why when I mirror a part in an assembly the mirrored part gets a new part number? I want to mirror only the position of the part which is always the same part. Is it possible to do that in Inventor?
View 7 Replies View RelatedWhen I open a drawing, i want to be able to change the appearance of its part model.I can do it in part itself using iProperties.PartColor.
But I want to do it from inside the drawing.
I know the material-appearance feature is appalling and badly implemented, but I can not wait until SP1, so any simple method of adding new colors to Inventor. I have looked through the wiki help and there is no simple explanation.
In our company the way we generally work with Inventor is to assign certain colors to parts and sub-assemblies, thus making it easier to build the final assembly. In previous versions of Inventor this was easily done. In 2013 some of the bold (primary) colors are missing and almost all of the various shades of these colors are also missing.
Migrating files across to 2013 has also caused problems with the color appearance not updating correctly. I won't go into the details but the problems and niggles aren't consistent, and there doesn't seem a way to clean/refresh the document library.
What I want is about a dozen bold colors (with a matte finish so when editing the part you do not have to overcome the optical illusion of starring into a morphed mirrored image of a carpark).
I am in Inventor customization using VB.net as development language.
There is one issue which is troubling me from some time.
Is it possible to identify the name of parent assembly of part/sub-assembly.
For Instance there is a Sub-Assembly/Part, how can i identify the parent assembly using VB.net without opening that assembly.
Inventor 2013....Ive assigned appearances (wood etc) to my model but they dont show up in an ISO drawing view when choosing "shaded". It shades it but not the appearances ive chosen.
View 1 Replies View RelatedI have an assembly of stair made from steel. There are lots of part the same. Is there a way to make a hole (inside assembly) to one and that hole would appear on all of them.
And another problem, how can I made cut (inside assembly) through more then one part so that would affect a part also when I open it alone.
I am capturing a book-case design that I made long ago into Intentor. I am almost finished, and I want to produce .dwg files and a bill of materials of parts that can be held.
For various reasons, almost all the items in the existing design are assemblies, and the underlying parts correspond more or less to half of physical parts that are contained inside a repeating cell. I will almost certainly continue using this approach.
A simplified design that shows this is at [URL]..... in the file Display.iam
I created the file Slat.ipt by using derive (Slat.iam).
If I replace the Slat assemblies with the file Slat.ipt, the bill of materials will show parts that correspond to physical parts that I can hold in my hand, or list on an invoice. I can do this with many, many mouse operations.
To make this modification quickly, I attempted to do Component -> replace on the Slat assembly. I use this operation a lot to replace one version of an assembly with another. When I do it with a .ipt file, the system pauses for some tens of seconds, then crashes.
A brute force work around is to use the mouse to do the replacement, essentially rebuilding the entire project in place.
When i create a part in an assembly, i select a plane or face with the cursor, but then i select again a plane for the sketch.
Why this double selection, and what does the first selection do, if the part is actually sketched on the plane i selected in the second time.
Normally you start with new models/assemblies/and drawings when you use the templates the naming by default is part1.ipt, assembly1.iam, drawing1.idw
I am currently at part431.ipt and assemby57.iam
I am concerned I may eventually reach part1000.ipt LOL
Currently using Inventor2012.
as you can see from the image, the blue cone isnt transparent. i set the material properties to "clear blue" to make it "see through", i want to show whats under the cone. however the cone isnt transparent. how can i get the cone to be transparent? is there a step im missing?
View 7 Replies View RelatedI've created a BOM of parts from a large assembly and it has an item just listed as pt.1.
View 9 Replies View Related