My dock and top menus have completely disappeared in Adoby LR (both 4 and the new 5) and I cannot get them to stay permenantly. Super annoying and this only happened after my Maverick upgrade. I contacted Apple, but the issue is ONLY with Lightroom -- not any other program, so Apple thinks it's an Adobe bug.
View 2 Replies
I'm running the latest Illustrator CC version on my Mac OSX 10.8.5 and it won't launch !
Basically, once you click the icon, the Illustrator logo comes up in the dock for a split second, and then disappears.
I have look at the Console Utilities and there are no Diagnostic Reports or System errors concerning Illustrator.
I have shot tethered through various versions of Lightroom with various cameras with mixed results. With each new version of LR, it seems that shooting tethered becomes more prone to crashes and in LR 5, I have found that the transfer of images is so slow as to be unusable. I recently had a shoot where I used LR 5 for the first time. The transfer of images was so slow that, after trying disk doctor to repair the disk and restarting the computer several times, I finally switched back to LR 4 and found that the transfer, while still prone to its odd temperaments, was much much faster than LR 5.
While LR 4 seems to be much better than LR 5 for shooting tethered, it is still so temperamental. If the camera sits for more than a few minutes without activity, LR no longer accepts images from the camera. I then have to shut down LR and restart it, making sure to have the camera off until LR is relaunched and tethering is turned on once again. If I do it in the wrong order, it doesn't work. During a shoot, it is maddening to have to constantly restart LR 4.
Looking for making LR 4 less temperamental and LR 5 functional when tethering?
I created a new pull down menu in AutoCAD 2011 and everytime I close out of AutoCAD or switch workspaces it disappears from the Menu bar. So I type in CUI at the command line and checked the customization window and it shows the menu as being active. I had no problems in previous versions of AutoCAD.
View 4 Replies View RelatedI have just run CC Cleaner and Glary Utilities , which we have been running for years , and every time it removes the Edit Bitmap link menu, in other words it greys out.
How can you edit the bitmap in Photoshop ? And get it the edit Bitmap menu functioning ?
Whenever I maximize a document in Illu. CS6 it overrides the application menu! It simply covers my whole screen making it impossible to reach my menues unless i drag the documents corners to make it smaller or click the minimize icon.
View 12 Replies View RelatedMy folders disappeared from dock, they are now showing as date and no longer as named folders. How do i recover my original folders? also now when i click on lightroom i only get an old version..
View 2 Replies View RelatedIs Photoshop CS Ver 8.0 compatible with Mac Maverick?
View 2 Replies View RelatedAfter installing Maverick osx, many dng do not open and I get the message:
Could not complete your request because the file format module can not parse the file.
The error occurs randomly on files that have always worked well.I already tried to reinstall Photoshop CC and Bridge but the problem remains.What can I do?
I use an iMac late 2012, 16gb of ram, graphics card GTX 680MX and disk fusion.
After Updating OS X (Maverick) Illustrator CS6 is not able to open .svg and .svgz files with SVG text under the condition, that the fonts not installed on the system. Is there any solution available to open such files without installing the fonts?
View 1 Replies View RelatedI get the following crash meassage on booting AE 12.1 from Mavericks
I have re-installed & trashed Prefs.
It would appear that my licensed copy of Lightroom 5, which I downloaded online, has disappeared with the install of CC. In my dock I have a question mark on the Lightroom icon. And installing from CC asks for a license number. Is there a way to retrieve my license?
View 4 Replies View RelatedI just installed gimp 2.8.10 for os maverick. But when I tried the plugin "liquid rescale" i got the following message:
"Plug-In 'Liquid rescale' left image undo in inconsistent state, closing open undo group"
and
"Plug-in liep vast: "gimp-lqr-plugin"
(/Applications/Gimp.app/Contents/Resources/lib/gimp/2.0/plug-ins/gimp-lqr-plugin)"
as well as this report from apple :
Process: gimp-lqr-plugin [710]
Path: /Applications/Gimp.app/Contents/Resources/lib/gimp/2.0/plug-ins/gimp-lqr-plugin
Identifier: gimp-lqr-plugin
Version: 0
Code Type: X86-64 (Native)
Parent Process: gimp-2.8 [688]
Responsible: gimp-2.8 [688]
User ID: 501
Date/Time: 2013-12-07 11:10:06.661 +0100
OS Version: Mac OS X 10.9 (13A603)
Report Version: 11
Anonymous UUID: E823D4A3-0A15-B1E3-324D-8CB84342FD80
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Dyld Error Message:
Symbol not found: _lqr_pixel_get_rgbcol
Referenced from: /tmp/*/Gimp.app/Contents/Resources/lib/liblqr-1.0.dylib
Expected in: flat namespace
I've updated programs and installed latested version of Java but did not resolve any of the issues.
View 7 Replies View RelatedI just downloaded Apple's new operating system "OS X Version 10.9" (Maverick). When I tried to open Adobe After Effects CS6 (which I purchased within the last year), immediately the following message came up (it wouldn't even open):
"You can't use this version of the application 'Adobe After Effects CS6' with this version of OS X.
You have 'Adobe After Effects CS6' 11.0."
When I googled this problem, I discovered that I could download "Adobe After Effects CC 12.0.1 Update." When I did this, the following message came up when I clicked "AdobePatchInstaller" :
"Update Failed
Updates could not be applied
This patch is not applicable for you. Pleas check for updates from the Help menu in your product to see a list of the latest updates available.
If the problem persist, contact customer support for further assistance."
The problem with those instructions, is that I can't even open the application to access the "Help menu" inside.
This behavior started in LR2. Thinking back it may be related to OSX upgrade to Snow Leopard. After I hit print, the print job is sent to the printer and almost immediately “disappears” like nothing was sent. I have also gotten an error message of “/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpll.app/Con tents/MacOS/rastertoescpll failed”. This only occurs in Lightroom. My workaround is to take the image into Photoshop and print from there. This happens with both of my Epson printers and also with an HP LaserJet, so I think it is a LR problem and not an Epson problem. All drivers for all printers updated to latest available for Snow Leopard. The behavior continued with LR3. Fixed itself for awhile, then in the middle of printing a series of prints, started again. I cannot print from within LR at all. MacBook Pro 2.16 core 2 duo, OSX 10.6.4, LR3, Photoshop CS3.
Through google searches I found the “rastertoescpll failed” issues reported after Snow Leopard, but they were related to Epson printers, and not just LR related and fixed with driver updates. This has not worked for me.
I really like the LR print module.
I have updated my MAC to Maverick and Adobe CC and all was fine till the main screen disapeared but tool bar remains. I unistalled, re-installed...rebooted, and spent three hours on the phone with New Delhi trying to reset Java, permissions etc...still nothing. how to get the screen back?
View 1 Replies View RelatedAfter deleting the top thumbnail in a stack, the entire stack disappears. The remaining stack-thumbnails reappear after Lightroom is restarted. I use Win7 and Lightroom 4.2. Donno if this issued occurred with v4.1. This issue does not occur with all stacks.
View 1 Replies View RelatedWhen I am working on an image, for some reason SOMETIMES, the cursor vanishes and all I will see is different elements momentarily highlighting but not enough to do anything in LR. pressing ESC gets me out of the module and somehow I have to exit the program...restart to get it back to normal again...
View 13 Replies View RelatedI'm running LR5 on Windows. I've got the grid view on my primary display and a second display showing the loupe view.
If the focus moves to another application (i.e. a small notepad window on the primary display) then I can still see LR with its grid view in the background behind notepad on the primary display however the loupe view on the second display disappears and I can see the desktop.
Is it possible to configure LR not to automatically hide the 2nd display when the input foucs moves to a different wiindow? I'd like to be able to continue displaying the image on the 2nd display while I'm doing something else on the primary display.
I've not been able to check but I've a feeling this is new behaviour in 5, I don't think 3 or 4 did this.
When I am working on an image, for some reason SOMETIMES, the cursor vanishes and all I will see is different elements momentarily highlighting but not enough to do anything in LR. pressing ESC gets me out of the module and somehow I have to exit the program...restart to get it back to normal again...
View 1 Replies View RelatedAfter installing Mavericks, I can no longer link files in illustrator CC as the finder window closes by itself after one second or if I click on anything. It was happening with save as also, but that seems to have rectified itself by reinstalling the program.
View 11 Replies View RelatedI am using LR 4.4 on an iMac. Why the White Balance Selector tool would disappear when moved across an image?
it seems to change to a vertical line with an arror top and bottom.
The areas of the image on which it disappears seem to be consistent, in other words, it disappears on the same portion of the image eveytime.
UPDATE: Since posting the above a few minutes ago I've noticed that my cursor is behaving eractically. For example, on a different image to the one used above, in the library module using the Loupe the cursor changes from a magnifying glass to an arrow pointing to the right. It does this on the same part of the image every time.
I'm going to try this again. Using PS CC for photographers, that is Photoshop CC and Lightroom 5.x, new iMac running Mavericks.
Having processed an image in LR and PS, and saved as TIFF back to LR. All is well.
If and when I subsequently take the TIFF back into PS for further tweaks and again save as TIFF back to LR, replacing the original TIFF, I then get the Metadata Conflict warning, the exclamation mark.
As far as metadata goes, I don't want to lose what I did in LR....that is, keywords, color codes, captions, gps data, etc. I do want to retain the additional adjustments I made in PS.
I've noticed that when I choose to 'import settings from disc' that the color code disappears and I have to re-do it.
If I select the 'overwrite with LR settings' option, my concern is that I lose those PS adjustments.
My questions is: WHAT settings could have been changed in my round trip to PS that trigger the warning?
I had a palette on my dock which gave me a thumbnail of all my imported images available
anyway at some point i clicked on the x after I had finished the project, but now it seems to be gone forever (does not automatically appear) when I open a new project...question is where is it and how do i get it back.
i have the PSCC icon on the desktop but I cannot make it go on the Mac dock. Is there a way to do this?
View 1 Replies View RelatedHaving just successfully installed Photoshop CS4 for Windows (XP-SP3), I was arranging my worksapce.When I tried to move the options bar from the top of the screen and dock it at the bottom (as I have always done in CS3) I find that I cannot.Has the ability to dock the options bar at the bottom of the screen been removed..? If not, how does one accomplish this..?
View 2 Replies View RelatedI have updated to 10.3.3, after updating I can no longer drag a file onto the dock icon to open it, any suggestions, is it a 10.3.3 problem or did I turn something off that I am unaware of. It will launch the program if it is not open but it will not actually open the file.
View 1 Replies View Relatedgetting a copy of Adobe Creative Suite and have succesfully installed it onto my imac, however when I try and run any of the programs the icon just bounces in the dock then quits.
View 2 Replies View Relatedwhen I select the crop tool, my image disappears during the entire crop process. I can only see the image in the preview pane. Why is this happening? I am using the most current version of Lightroom, and I am on a PC.
View 1 Replies View RelatedIs it possible to dock OPTIONS bar to the bottom of the window in CS4?
View 3 Replies View Related
