Lightroom :: 4 Export To JPG Colour Washes Out When Viewed In Preview
Nov 26, 2012
LR4 4.2 with ACR 7.2Mac OSX 10.8.2Nikon D600 NEF (Raw) files This problem has occured everytime I use LR4 and I've tried exporting to different colour space - sRGB, AdobeRGB with the same result. This is using my new Nikon D600, when I export a photo processed in LR4 and shot from my old Canon 400D the colours are almost identical when viewed in Preview with just the usual loss you would expect converting to sRGB.
I hope this is an issue that is being worked on for the update that will fully support the D600.
View 2 Replies
ADVERTISEMENT
Aug 14, 2013
Here is the story: I have batched out a folder of JPGs from Photoshop and would like to import them into Lightroom to Resize them . I'm resizing so that I can post them on my website.
I have double and triple checked to insure I have no "Develop" settings to be applied. I import the photos, and they look fine in thumbnails. Then they update one at a time with a washed out color to a bluish / b&w type color. I exported one of the photos to see if it was just a preview and sure enough the color is gone.
It doesn't happen on every import as I just resized a different folder of photos that I had downloaded from elsewhere a week ago and they worked fine. It's somewhat random. I am attaching links to before and after.
Original exported from Photoshop with no special settings:[url]....
Imported into Lightroom and Exported right back out with no changes:[url].....
View 1 Replies
View Related
Dec 10, 2013
I'm working on a Mac with CS6.
I work for a small publisher that produces knitting books. The problem is this: our tech editor has created charts in Illustrator using the pattern swatches feature. (These are knitting charts. Each square contains a pattern swatch representing the knitted stitch.)
I am then placing these charts in their native .ai format into an Indesign file and exporting them to PDF. In Acrobat, the charts look fabulous. In the Mac Preview reader and in GoodReader, the charts do this...
... the pattern swatches shift around inside their squares. Each of those dots should be centered inside their squares. In Preview, when I resize the application frame, the pattern swatches move as I re-size the frame.
I've tried saving the charts as PDFs and placing those into the InDesign file. Exporting the charts as images (jpg or tif) works, but I have to make the resolution/file size ridiculously large to get the quality of the vector image. I'd rather place the .ai files into the .indd file if possible.
View 2 Replies
View Related
Jul 17, 2006
I have saved a psd file as jpg using File -> Save as.
Also tried: File -> Save for web.
When I look at the newly saved jpg file in photoshop the colors are great.
When I look at the same jpg file in Firefox or Internet explorer the file look bleached (a lot lighter in color).
How do I save the image for view on web, and then make sure the colors match more closely to the original file?
To manually correct for the missing colors would be a lot of work, and I hope there is an automated way of doing this?
Using Photoshop 5.5.
Both images viewed on same computer in same light.
View 2 Replies
View Related
Jul 23, 2013
s it possible to have a warning, if you're about to export just from the Smart Preview data? I really love Smart Previews and it speeded my workflow very much, but it happend some time that I exported my data without having my external harddrive connected, just working with Smart Previews. So the only "warning" was that it's much faster than usual if you export your files :-) It would be great to have kind of a dialog, if' you're really sure to export just from Smart Previews!
View 6 Replies
View Related
Jun 13, 2013
The new colorfringe correction method in Lightroom 4.1 RC2 works fine even for difficult longitudinal CA when used with care. After basic adjustments I normally export my raw file to CS5 for further editing.However found out that even after the Camera Raw update to 6.7 RC my Lightroom colorfringe adjustments were not transfered to CS5.
: but do we require to buy CS6 with Camera Raw 7 to open the raw image with Lightroom corrections for colorfringes maintained?
View 17 Replies
View Related
Mar 15, 2013
A drive I kept my photos on corrupted and some of my folders of photos went missing.
I have a reasonable sized preview, I can go in and look at the image, the only difference is I can't zoom in to 1:1. I want to export the preview image from lightroom, its still better than losing the whole image.
Is there anyway to do that? the usual export throws a missing file alert.
View 2 Replies
View Related
Jun 17, 2013
Why do my pictures look so much better when viewed while still on the sd card? Why do they lose all their color and sharpness once they are imported?
View 6 Replies
View Related
Oct 15, 2013
I have used the 30 day LR5 trial and I don't love it and prefer LR3 that I have been using for the past few years. I've created some libraries though, and want to know how I can view them if I return to using LR3 after the trial.
I didn't import the images to Lightroom, rather, I referenced them on my HD.
Do I need to export them as an older version? Or save the images in another format?
View 4 Replies
View Related
Jan 19, 2014
Basically the situation is that I have large number of originally RAW images (now jpegs) that look fine (to my eye) on my home computer but all take on a slight green tint when I view them through ios devices (e.g., my new macbook pro, ipad air, iphone). Wondering what's causing the difference in tints.
Background: Shooting for 6 years, all with a Canon Rebel and shot in RAW, processed in Lightroom.When I export to harddrive or photo sharing site, I set Lightroom export color space to sRGB and then export as jpegs.My home PC monitor color space also set to sRGB.When I view those exported pics via something beside my home monitor (e.g. a plasma TV), the color balance seems fine.
1. Does the color space setting in the DSLR matter? My understanding was that color settings in camera only influence jpegs from camera - - raw files carry no pre-set color space.
2. Could my monitor be out of whack or do Apple screens somehow use a different color space?
View 2 Replies
View Related
Dec 13, 2011
I am having a problem with camera mapping...I get everything setup and looking good, but when I render it, the image looks really washed out. This happens with both scanline and mental ray rendering. I have done this in the past using max 2009 without any issues.
View 3 Replies
View Related
Nov 11, 2009
I have just started using paintnet and when i tried to print it will only print in blackand white even when the photo is colour. The print preview shows the image in B&W. How do i get to print in colour?
View 4 Replies
View Related
Nov 7, 2012
How can I print & preview with a colour profile in Photoshop Elemnets 11?
Only showing print in " File "
View 1 Replies
View Related
Sep 12, 2013
I have photographed some colour negatives in RAW. Any outline of a process as to how to convert these to positives using Lightroom v5. I have tried and failed!
View 6 Replies
View Related
Jun 2, 2013
I recently bought a Nikon D7100. I took some test shots and imported the images to Lightroom 4.4, then generated 1:1 previews for all the images.
Previews zoomed to 1:1 in Library Mode are noticeably soft. The image below is a screen shot of the Library preview:
Moving to Develop View produces a higher-resolution 1:1 preview. The image below is a screen shot of the Develop preview:
Look at the bricks and window screens to see the difference.
This difference occurs immediately after import (with a User Preset applied during import). Once any Develop work is done, the Library preview updates and displays at full resolution.
This problem makes doing initial editing/selection of images time consuming, because I can't determine the sharpness/quality of imported images until I've done some kind of Develop adjustment on each image.
View 3 Replies
View Related
Mar 29, 2014
I am using MacBook (late 2008) OS X 10.9.2 and recently upgraded to Lightroom 5.3 from Lightroom 4. After a while, some photo started to show exclamation mark at the right hand corner of the photo (*.CR2 raw files in NAS) in grid view. When I click on the exclamation mark, it shows a dialog with following message; "Lightroom has encountered problems reading this photo". So, I moved previews.lrdata, which is about 9GB, to the trash and restarted the Lightroom 5, expecting Lightroom 5 to create a new previews.lrdata. However, it won't create any preview at all.
exclamation mark at the top right hand corner of the photos in grid view.
size of Previews.lrdata file stops at 152KB.
View 3 Replies
View Related
Jul 17, 2012
I have tried unsuccessfully to export colour separations from Illustrator (CS5.1 MacOSX). I need the separations in an editable file format, but it seems like I am only able to print separations.
I have tried to print to a file with Output set to host-based separations but even that seems to be impossible. I get an error message "The save as PDF options in the Printer dialog are not supported".
The software is clever enough to do the separations, but somehow it can only print, not export them. Is there any additional software that would pose as a printer but instead of printing would create a file?
View 3 Replies
View Related
Oct 7, 2013
Just downloaded LR 5 and noticed that I cannot jump back from a Publish Service folder preview to a different folder preview in grid mode. The only way to view photos in another folder is to restart LR 5. This only happens when I am viewing photos in a Publish Service such as Flickr.
I updated from LR 4 using Creative Cloud installer.
View 4 Replies
View Related
Jan 15, 2013
When you're working on an image in GIMP, typically there's a bunch of selection and path spam all over the canvas, and checkered patterns for transparency, and all that stuff.
Is there a way to easily see what your image will look like when exported, without exporting it every single time you want to see what the image will look like?
View 1 Replies
View Related
Jul 15, 2013
I have no JPG preview in connect or windows explorer it shows only an icon, This is only files exported from CD or PP. All other JPG exports from PS or other programs are OK
If I hover over the JPG icon in connect I get a large thumbnail preview that is OK
I have F8 and repaired CD from disc and remove and Installed CD with no fix
Win 7 64bit 8 Core 12Gig Ram all up dates are installed
Win 7, Intel Core i7, 3.2mhz, 12Gig Ram. AMD 5870 Corel X6, Photoshop CS3, Lightroom 5, Flexi 10.5, Versaworks, Galaxy Tab 2
[URL]
View 14 Replies
View Related
May 21, 2012
Is there any way to export the overprint preview as jpeg/pdf ?
View 4 Replies
View Related
Aug 3, 2013
i have like 20 frames and the delay between the frames is 0,01 sec's, its perfect in the preview, but when im exporting it, its really slow. i've even deleted like the half of the frames and its still very slow, im using Photoshop CS4 and the file is like 500KB and there are like 43-50 colors, its also slow when i upload it on tumblr or something.
View 1 Replies
View Related
Dec 10, 2012
Being an architectural photographer I create a lot of layered files with many exposures with different lights on and daylight separately. I always save my layered files in a folder called Layered files in the project. I also save flattened 8 bit Tif's at full resolution for my client as a print file in a separate folder along with another folder for web and device optimized files. When my client opens some of my flattened files they tell me the only see one layer. When I open some of them in Preview I get the same result. I only see the last layer I put into my layered file. But when I open the same photo in Bridge I see the full flattened file as I saved it. What can I do about that?
View 3 Replies
View Related
Oct 31, 2010
I wish to diable JPEG export preview...How?
View 3 Replies
View Related
Oct 3, 2013
Excuse my awkwardness but I'm self taught on AutoCAD & have managed fine for last few months but have encountered an issue this evening I can't resolve. I've produced drawings, basic they may be, but when preview them the actual drawing area is barely noticable & when export to pdf it practically prints a blank page. I have very simple items in drawing, stockpiles, excavations test locations, and have been producing pdf's fine, even as recently as this morning using the same cadfile. But what ever I've managed to do since then has changed something and I can't resolve the issue.
View 6 Replies
View Related
May 21, 2012
Is there any way to export the overprint preview as jpeg/pdf ?
View 2 Replies
View Related
Nov 23, 2012
I've recently purchased a monthly subscription to Corel Draw X6, but my clients use Corel 12 and told me they couldn't view the file (when opening it, it seems to be empty). I tried several times and still had the same problem. We came to the conclusion it might be a question of incompatibility.
Is there any problem of compatibility between CorelDraw X6 and Corel 12? Where could I download Corel 12 in order to avoid future problems..
View 4 Replies
View Related
Feb 21, 2013
I'm trying to make a PDF file of a webpage in Illustrator that the client could view in 100% size.
When I open the PDF in Acrobat it displayed to large and therefor everything looks jagged.
Where is a setting like "document resolution", or similar, that make the size "100%" in illustrator the same in Acrobat?
View 10 Replies
View Related
Nov 12, 2012
Yesterday I discovered that when I load tiffs into CS5 they are slightly blurred and the colour changes, when I load them into windows paint they are crystal clear and the colour is as it should be. To double check I obrained some free tiffs online and they also show up blurred and with more colout saturation, this only seems to happen with tiffs and has stopped me dead in my tracks.
I have added an example of one of my photographs here, if you look closely you will see the photoshop image on the left loses detail and appears slighlty blurred, also the colour is more saturated. The windows paint version is crystal clear and the colour is true.
I just can't figure out why the free windows paint is opening up a clearer unaffected image whilst the premium photoshop software opens up a less clear and colour changed images...
Example..... In both images compare the small tree situated above the large post on the right, the thin branches on the "right hand" version are more detailed...
............................... Click to enlarge ...........................................
View 8 Replies
View Related
Jun 3, 2013
I am trying to set up custom reports.I found the landxml reporting program under the 'landxml reporting 8' folder Tools Options locates / sets the config file.
The config file refers to the %reportdir% setting / variable / thing.
I have multiple C3D versions installed. I am trying to set custom reports for 2012. 2014 is also installed. I found that there is a single landxml program doing the work for all versions. On my workstation, the 2014 report facility is being used in 2012.
It looks like if users need to make a custom report set they must use the landxml reporting program to refer to the custom files. Correct? Or ... have I missed something? Is there a way to view or set reportdir ?
View 6 Replies
View Related
Feb 3, 2014
How do I create 3D art (to be viewed with red/cyan glasses) in Illustrator or Photoshop?
View 1 Replies
View Related
