Lightroom :: 3.6 Has Now Run Out Of Memory And Won't Operate
Sep 15, 2012
Was working on a Tiff file which started fine then my LR3.6 started to slow down more and more the more work i did. Now it wont operate at all. I increased the RAW cache from 1 to 5GB even though I had only imported 1.5GB of new pics. My laptop is a DELL XPS running Windows Vista with CORE 2 DUO T9300 2.50GHZ, 4GB of RAM and 12GB of available hard drive space but LR System info says it is running at 170% of memory available. I have closed all applications other than LR. What do I do?
View 1 Replies
ADVERTISEMENT
Sep 25, 2012
"lightroom cannot operate without a valid temporary file path" when ever I try to load lightroom.
View 1 Replies
View Related
May 6, 2011
I am using corel x3 a long time but never, never had this kind of problem. When i work in corel enviorenment after i have finished my work i go to save my work. But then is the problem It Saves the file with Large Memory on it. let's say if the file normally would be 200 K, now it saves with 3 MB. And if i import some other files in my work then the saved file will be even bigger. If i Delete the files that were imported The Saved File will be Again the same SIZE ! Even if a take one part of the file, let's say if i import only one small text and put it in another file and save it like that, the saved file will be 2 MB. I had a lots of problems, i had saved files on this way with 23-24 MB and when i open them it takes like forever. When you look that file in corel it has nohing in it, absolutely nothing that should be 24 MB. But all of my important work is in that files how to make all things back to normal again,
View 9 Replies
View Related
Nov 4, 2011
I do have problem with my newly installed CorelDraw X5. Before X5 we used Corel 12 in our company.
I have project file (150 MB) with lots of text, bitmaps, vectors - about 100 pages. File opens but I can't save it. I always get OUT OF MEMORY error. I even tried to divide this file into 2 smaller parts but still doesn't work.
What I noticed - Corel X5 after clean start (without opened project) takes about 80MB of RAM in task manager. When I open project usage changes from 80MB to 1,2GB. While saving it takes 1,6GB of RAM and it crashes.
To compare - Corel 12 and after opening same project file Corel 12 takes much less of memory - about 770MB and it works without problem.
Where from comes this memory usage difference?
My PC:
Windows 7 - 32bit
4GB of RAM
Intel Core2Duo 2 x 3.0GHz
700GB free space on drive C:
View 16 Replies
View Related
Jul 22, 2013
None of the automated upate features seems to be working. In the past I've been able to contact an agent who updated it manually but that option is greyed out.
View 1 Replies
View Related
Jun 9, 2013
Will Adobe Photoshop 3.0 operate in Win 7?
View 6 Replies
View Related
Sep 24, 2013
Can I operate CC on my desktop and laptop?
View 5 Replies
View Related
Feb 26, 2012
I have a public sub it works fine with selectionsets.
But when I want to use in a fence selection set it did not work.
I get message "number of selected object:" truly but it did not set att values.
I post the code below.
Imports Autodesk.AutoCAD.ApplicationServicesImports Autodesk.AutoCAD.DatabaseServicesImports Autodesk.AutoCAD.EditorInputImports Autodesk.AutoCAD.GeometryImports Autodesk.AutoCAD.RuntimePublic Class Class1
[Code].....
View 2 Replies
View Related
Jan 5, 2014
MY AI Will not operate correctly it will not open as it should and it will not let me update it keeps saying error u44m147 so i try to uninstal and reinstal it wonlt let me proceed!
View 1 Replies
View Related
Jul 26, 2008
I am running 1.4 on a reasonably well endowed PC. Last week Lightroom starting consuming all memory. With nothing else running it takes 1.8GB or the 2.0 installed and the system starts thrashing like crazy. Once it has reached the max the cropping function fails, image display becomes painfully slow, and loading Photoshop is totally impossible.
View 2 Replies
View Related
Aug 13, 2013
Lightroom 5 on Windows 7 32 Bit and 8 Gigabytes of memory (more than the 32 Bit system can use) permanently runs out of memory when doing some more complex edits on a RAW file, especially when exporting to 16 Bit TIFF. The RAW files were created by cameras with 10 up to 16 megapixel sensors with bit depths between 12 and 14.
After exporting one or two images to 16 Bit uncompressed TIFF an error message "Not enough memory" will be displayed and only a Lightroom restart solves that - for the next one to two exports. If an image has much brush stroke edits, every additional stroke takes more and more time to see the result until the image disappears followed by the same "Not enough memory" error message.
A tab character in the XMP sidecar file is *not* the reason (ensured that), as mentioned in a post. It seems that Lightroom in general does not allocate enough memory and frees too less/late allocated.
fix that bug, it's not productive permanently quit and restart Lightroom when editing/exporting a few RAW files. Versions prior to Lightroom 4 did not have that bug.
View 17 Replies
View Related
Nov 19, 2011
The pre-loaded double click options in the CUI were getting really annoying, so I deleted all the double click attributes (while in the CUI tree) to have a clean slate to work with, but now I can't figure out how to add DDATTE to work on a double click.
I followed the Help guide and got all the way until it told me to "drag the command you want to add the double click action in the Customizations In <file name> pane", but I cannot find the DDATTE command in the Command List.
View 9 Replies
View Related
Nov 30, 2013
I have tried to upgrade my gimp2.8.2 (default in debian distrubuted version at the moment) to 2.8.10 since I read through release notes and realized I could be an even happier user with this version.During installation I found that I missed quite a few bits and pieces, but I installed them when required. (babl, gegle, glib2 e.g.).Eventually I reached the make install stage and it seemed to work ok. However when now opening gimp I can't open files and I lack quite a few filters possibly other menues missing I havn't walked into everything yet. It seems like a folders supposed to be created and refreshed in /.gimp2.8 was not.
I am on debian wheezy linux (7.2), xfce4 deskop.
View 2 Replies
View Related
Jun 20, 2013
i have photoshop elements 9. none of the tools across the top will come up all i have is my pictures in organize. i can't print, transfer, download, import, export. nothing
View 1 Replies
View Related
May 28, 2013
My Lightroom 4 on a Mac has stopped importing from a memory card. It used to do so, but now it hangs up and never actually imports the photos. If I save the photos from the card to a folder on my desktop, it works just fine. I have tried several different memory cards at different speeds, sizes, fullness, and it doesn't seem to matter. What can I do to go back to importing directly from the memory card?
View 2 Replies
View Related
May 2, 2013
When I import images from my memory card, the images in preview are colored but when rendered in LR4, they are automatically converted to black and white. I made sure that in the import panel that 'Import During Import'> Develop Settings> None. My images show up in LR4 colored for an instance then convert to black and white. This is the first time I have encountered this problem. Am I missing something. I've checked my camera settings with nothing that I believe is the problem. I've been successful in using the other presets under 'Apply during Import' > Develop Settings, but using 'None' doesn't prevent the images from being converted to black and white in LR4. the same is true for importing to Bridge in PS-CS6. I get the same results of all the images being converted to black and white.
View 7 Replies
View Related
Nov 1, 2011
Discovered that my main drive's memory was extremely low. I use all external drives for storage & backups, so only programs & program files are on my 500GB C: drive. I've found this "Lightroom Data" folder is consuming 318GB of memory!! I found LR is currently references the catalog "2007 lightroom-2-2". I backup & optimize each time I finish another session.
I don't know what is important in this Lightroom Data folder and what can be dumped in here. I'm posting a screen shot.
Why are there more than one LRCAT file created?Do current LRCAT files contain all previous work done in lighroom so any older ones can be deleted without any loss of work done on older files or no?What is the safest way to not loose hours of previous LR post processing work for all current and previous projects and yet release all duplicate/unecessary storage/info in my "Lightroom Data" folder?Why is it still calling itself 2007 (the year I first bought LR) and not updating itself?
I have LR 3.5 64-bit on Windows 7.
View 7 Replies
View Related
Mar 23, 2011
I normally choose to "Move" images from my memory card to a hard drive folder when importing into Lightroom so that the card is then clear to use again. I cannot think of any settings I have changed Lightroom no longer gives me the option to move or add from a card. Is this an undocumented "Feature" of v3.3
View 13 Replies
View Related
Dec 14, 2013
I just downloaded lightroom 5.4 the other day and today was the first time I went to download images with it.
I could review all my images before I plugged my card into the card reader and attempted to download them, when I opened the import window in lightroom the first image on the card had a preview, but it was greyed out and the rest of the images came up with the .CR2 icon and when I tried to import them I got an error message saying that the files cannot be read.
I tried ejecting the card and putting it back in my camera, but now I can't see the images on my camera either or save them manually to my hard drive.
The files are from a Canon 5D mk II and I shot all the images in RAW with no JPG's.
View 4 Replies
View Related
Nov 20, 2012
I'm using LR 4.2 and trying to export to PS CS6 on my Win 7 Asus 4gb laptop with 45gb free space on my hard drive.
I have made substantial edits to a raw file in LR and am attempting to export it to PS for final edits (cloning out extraneous features) at 16cm and 150 ppi (less than ideal but still too large). The working file is 73 mb.
However, I am getting an unsufficient memory error when trying this on Tif or Psd, even Jpg. I can get it to export as original, which gives me a DNG but then I get the same lack of memory issue when trying to open it in Photoshop.
What I can do is open the working DNG file in Photoshop but then only some of my adjustments come through - all the noise removal I have done has gone and the image is very noisy in PS. I can also convert it to Tiff using VSO Image Resizer and open this in PS but again, the noise is there.
The image is to be used as the cover photo on an A4 magazine so needs to be of print-quality.
View 4 Replies
View Related
May 26, 2013
I had LR4 working just fine but now I cant import from camera or memory card?
View 1 Replies
View Related
Aug 30, 2013
Will Adobe Creative Cloud operate with windows XP?
View 1 Replies
View Related
Aug 1, 2013
As you can see from this screenshot I am trying to use the brush tool to complete the shadow of my planet however if I select the planet the brush tool I'm using does not cover up the atmospheric glow. I am not sure how to select the glow effect independantly of the planet. If I do not have the planet selected then the shadow is applied to all the layers including the starfield layer even though it is completely locked which is very annoying in of itself. So I guess my question is how do I get the shadow to be applied to the planet and its atmosphere but not the background stars. I am using a 3600px brush with 0 hardness for the shadow. System: CS6 on Mac OS 10.8.4
View 3 Replies
View Related
Jun 5, 2012
when I attempt to use the ALIGN command (both from the command line and also the ribbon) I receive a response as follows Command: _align "The file geom3d(.lsp/.exe/.arx) was not found in your search path folders. Check the installation of the support files and try again.nil" I checked thru my programs and there is NO geom3d.lsp, exe or arx file. There is in Program files/autocad2013 folder a geom3d.CRX file. I attempted to copy the original geom3d.ARX file from release 12 into the same folder, went to place the folder in the working directory via the options menu but the directory wouldnt load from the Support File Search Path to the Working Support File Search Path so I placed it in the Program files/autocad2013/support directory and loaded this directoryinto both the Support File and WOrking Support directory which loaded but the following response showed "Command: _align Initializing... ARXLOAD failed" How can I get this command to work as it was fine in Autocad 2012 before I upgraded.
View 7 Replies
View Related
Feb 27, 2013
My new computer is equipped with an SSD for programs and a 1TB disk for data. How do I configure Elements so it can run from the SSD (C:) but store my picture data on the D: drive?
View 4 Replies
View Related
Jan 19, 2014
Ever since CS5, the move function has operated normally in the horizontal direction but backwards in the vertical direction. In other words, entering a positive value moves objects down, entering a negative value moves them up.
At first I thought this was a bug, but it has continued in CS6 and CC on every computer we have. Yes I'm getting used to it but it's opposite of every other software package we have or have ever had, including Illustrator up to CS5.
I can't find a user control to correct this. Is there a way to do it?
View 1 Replies
View Related
Dec 7, 2011
Is there any way to find out which memory card was used with an image?
View 1 Replies
View Related
Jan 19, 2013
I took pictures on different cameras. I now want to import these pictures into 4.3 in the same folder fro the two memory cards.
View 16 Replies
View Related
Jun 5, 2012
LR 4 seems to consume and continue consuming lots of memory that is not released upon exiting. This condition occurs whether or not anything is being done in LR. Running LR4.1, Win 7, i7 processor w/ 12 GB ram THis did not occur in LR3.
View 2 Replies
View Related
Jul 19, 2012
With previous versions of Lightroom (pre v4.x), when I would plug in a memory card with photos LR would automatically switch to the import screen. This seemed to stop at v4. I can't seem to find a way to make that happen automatically under v4. how to make LR automatically switch to the import screen when a memory card is connected?
View 10 Replies
View Related
Apr 8, 2013
When I tried to export several (say 15) Fuji X-Trans files at the same time, I got a "Not Enough Memory" Error. This problem only occurred after after upgrading to Lightroom 4.4. I can now only export a few (3-5) X-Trans files at the same time.
I am using Windows 7 32-bit with 4GB memory, SSD System drive, and Radeon 7700 Graphics card. For Virtual memory, I set "no paging file" on C drive and "system managed size" on another SSD drive.
View 9 Replies
View Related
