let say we need some text like " CIRCLE" and it should be filled with small circles (Like below) but not clipping mask mean the object should not flash cut on the edge of characters. is there any effect, or we need to do it manually?
View 9 Repliesis there a way illustrator treats objects as filled so that if i click inside a none filled rectangle, it gets selected rather than making me click on its edge to select it?
View 10 Replies View RelatedSo I've been messing with Live paint, and I've noticed that where paths overlap or abut, or even if a path was expanded to a fill, a transparent line is there. They are not always noticeable in Illustrator, but when I bring the documents into Photoshop, they're blatantly obvious!
This is a section of my linework before making a Live Paint:
Now this is what comes up when I make the live paint:
When I bring it into PS, it becomes a lot more obvious:
Is there anything that I can do about this? After more than an hour of chatting with a Tech support person, we determined that turning off anti-aliasing when I open the docuement in PS will fix this, but then all the lines are jagged, so that's not a viable fix. I know I can fill these gaps in in Photoshop, but I don't think that I should have to do that, and also, with complex artwork, this isn't exactly a viable option... Am I working too small?
The Recolor Artwork dialog does not replace the color of objects filled or stroked with pure black, either CMYK or RGB. (Yes, with the Recolor Art checkbox selected.) The dialog will replace any other color, but not black. Not even a manually created rich black. Manually selecting another color from the Color or Swatches panel does change the object's fill or stroke.
This happens with both CS6 and CS5 under Windows 7 x64. I reported it as a bug on the prerelease site. Also not sure if bug reports are still being read for the released version.
what I do, my text box will not come to the front of my color-filled box. Is this a pc bug? I am used to working on Illustrator with a mac and experience little problems. I am using CS5 with Windows 7.
View 3 Replies View RelatedI just thought I would ask... and it may be impossible... Is there a way to convert text to a stroke/strokes instead of a filled path?
View 10 Replies View RelatedI have a Floor Plan View and it was modeled up everything good displays and prints correctly (drawing 2 on the attached pdf) . I have another Floor Plan View which was create via duplicating the first one - therefore the majority of the drawing is the same. However, the filled region through the center of the duplicated view is obscuring the other modeled objects when it is printed.
The region is set to transparent (as can be seen when it is viewed on screen) the filled region has been sent to back, and the other objects are all on exactly the same layers in both documents (as they are identical apart from other noting which has nothing to do with the actual filled region).
why the filled region would be obscuring the objects in one drawing and not the other? The only way I can find to get the objects to print which are "covered" by the filled region is to turn the region off, which defeats the purpose as it is there for a reason? This happens with hard copy printing and also to pdf. Printer is set to raster printing .
I have this north arrow that is not working in a clients drawing. Look at this drawing with the block in it and determine why the arrow head is filled in the block editor but not filled in the drawing (model space)???
View 3 Replies View RelatedI saw a very simple process for filling text with an image. Only two or three steps; involved a 'mask'.
View 5 Replies View RelatedSometimes when applying outline to text, as we increase the outline thickness, certain holes in the text are not being filled up, no matter how thick the outline is.
Is there a solution for this? As I think it's not so nice with holes here and there.
How to create text filled with an image?
For instance I would like to create some text filled with the US flag.
I have a number of issues with PSP X4. When I try to set text I get outlined characters, and I can't figure out how to get the outlines filled with color. I am selecting solid fonts. I'd like to use the figure in making my own tubes as well as signing my photos.
View 6 Replies View RelatedI am brand new to web design and I have Web Designer 6.0. I've looked at video instructions and can not figure this out. I am trying to group a simple rectangle filled with color to some text that will make the rectangle in the background, the text in front, and be one object. It says choose both objects and then group them, but I can choose the rectangle or the text, but not both. I know this is a simple thing to do, but I'm brand new and can't figure it out.
View 5 Replies View RelatedIn the past, I've been able to take a pdf file, place it in Illustrator and then manipulate the text, objects, etc. For some reason I've been unable to do so with my new Illustrator CS6. Would this issue have something to do with the way the file has been scanned? Is there some way to open a pdf file in Illustrator in order to make edits?
View 10 Replies View RelatedI don't know if this is possible at all in Illustrator, but I want to align objects to text paths. Look at the following example.
I start with something like a circular hierarchy, that I get as an output from another program. These are only lines and text. Now I want to add a flag behind the text. This flag should have the same orientation as the text path.
As this hierarchy is actually pretty big (this is only a snippet), I don't want to rotate all the flags manually. I tried to do it manually with the below example, but it still doesn't looks right...
Is this a proper method to rotate the flags according to the orientation of the text paths in Illustrator?
I have two simple text objects (not textarea) and i'm trying to align them vertically to bottom.It aligns these text objects by bounding box, not by base line. How can i align text objects vertically by base line?
View 6 Replies View RelatedWhat is the best way to achieve the effect below, where the square conforms to the shape of the D? Also, how do you make objects or text give way to other text, such as the attached Ugg logo or similar? I know you could put a white stroke, but then that makes the object itself look smaller.
View 7 Replies View RelatedI have a banner that I got from a vector eps file.
Now what I would like to do is fill the white background of the outline path...
See my image
When I draw an object in Illustrator, the shape appears filled in the view of the document, even though it is set to no fill in the apprearance panel. The thumbnail for the object in the layers panel shows it with no fill, and if I copy it and paste it into Photoshop it has no fill there, so it really has no fill. Just in the view of the document where I am drawing it appears with a colored fill.
I'm drawing lots of overlapping shapes, I want them with no fill so I can see the ones behind. This is happening with all the tools I have tried: pen, pencil, paintbrush, shapes, whatever. I've tried restarting Illustrator, also restarting my computer, nothing changes. I may have clicked on some setting inadvertently somewhere, as I've been exploring and clicking on lots of things to see what they do.
I'm trying to combine two closed, filled arcs to make a 3 sided image with a large arc at the top and a small one at the bottom. I need to knock out the extra fill along the outside of the small arc at the bottom which is the point where the large connects. I'm also unfortunately still using CS2 ans using XP. I've tried many combinations using the pathfinder tools as well as setting them up as compound paths and masks.
View 2 Replies View RelatedThe file we generated is on the right side of the image, in both PREVIEW and OUTLINE views. You can see that letters "I" in the logos are boxes and the bottom horizontal stripe is a filled box. In the art file they received, the capital letters "I" in the art and the horizontal box have become paths with DASHES applied.
View 7 Replies View RelatedI'm drawing some objects in illustrator and when I stroke it, it's clear that the color is not staying or not matching the object. I took a picture of it.. I drew a lot, but this is the first time that it is happening.
View 4 Replies View RelatedI have this path that I got from Shutterstock. No matter what I do with it, it's got this green fill on it. So if I apply a grey fill to it, the grey fill is put on top of the green. If I remove the fill completely, the green fill is still there.
Maybe the person who made it applied some kind of magical unremovable fill color to it or someting?
I've ungrouped it, checked that there's no effects in the appearance panel, and of course checked that there's no outline on the path. I've also tried releasing compund paths. There's no opacity mask or transparency modes. Nothing worked.
I am trying to use the property "typename" with the fillcolor. I am using following statement:
grp.compoundPathItems.index(j+1).pathItems.index(0).fillColor.typenam e
It'll give error i.e. access of undefined property typename.
Is there any way of finding the typename of fillcolor?
Actually, I want to get the type of fillcolor used in pathitem, i.e. is it "GradientColor", "PatternColor" or "SpotColor".
I am creating an image, mostly text and color. I want to create words with letters that have been turned cw and ccw, alternating. After that, I plan to flood fill the words. Unfortunately, I get some white inside where I flood filled.
View 14 Replies View RelatedThe thing is that my dimension text is colored white and outlined with the cyan( the color I want to use it for).
I have attached an image so that you can see. How to remove this white and have some other color instead of that.
How do I start with a circular blank space to be filled with text/pic? All info I can find relates to rectangular shapes.Max
View 4 Replies View RelatedI am new to Illustrator having had to switch from FreeHand recently and can't figure out how to get gradients to flow through non-touching objects. The "merge" option here treats things differently than FreeHand did and only works with paths that overlap.
View 6 Replies View RelatedI have a variable number of text lines I would like to arrange along the path of half a circle. I would like the text to look like each text-string is radiating from the circle (the path I have as half a circle).
I would like to do this in adobe illustrator
I would like the text to be evenly spaced along the path dependent on how many lines of text I have.
I have seen other discussions suggesting either the blend-tool or the brush-tool. But no luck. The blend-tool would make distorted shapes in between, and would twist and distort the text. The brush tool would make each text a little bit 'cone-shaped', and I would prefer having the text without such a 'cone-shape'.
I am attaching a picture that halfway shows my intentions. In this diagram I have started rotating the first 4-5 text-lines. I have more text-strings (just above the half-circle) that I also would like to include along the path the half-circle is indicating.
The final goal is to get each of these locality-names raditing from the tips in the little red tree.
Is it possible in illustrator to align the text along a path like this? It is almost similar to the normal align objects and distribute objects.
I am working on a Mac OSX 10.5 Adobe Illustrator CS3.
I have tried the offset path, however it gets too large. I am looking to keep things simple but need a bit more definition that just a simple outline will give. On this particular image I am looking to create an outline or fill shape behind the words and pistol but wanting to keep roughly the same shape.
View 6 Replies View RelatedI make a shape filled with an 80% black from the CMYK palette (0,0,0,80), and another shape filled with 80% black from the grayscale palette. Then i convert the color space from CMYK to RGB and the two grays that were identical in CMYK appear very different in RGB. Why is this?
View 2 Replies View Related