In the past, I've been able to take a pdf file, place it in Illustrator and then manipulate the text, objects, etc. For some reason I've been unable to do so with my new Illustrator CS6. Would this issue have something to do with the way the file has been scanned? Is there some way to open a pdf file in Illustrator in order to make edits?
View 10 RepliesIn CS5, when you have locked objects within a group or layer, you can still select the whole group/layer at once. And with the group/layer selected, any transform/cut/etc will affect everything in the group/layer, including the locked objects.
But in CS6, it seems that you cannot select entire group/layer with locked objects -- the "selection circle" in the Layers panel will not show the double circle. And if you manipulate the group/layer now, only the unlocked objects within it will be affected; the locked objects will stay the same.
How can I revert back to CS5's behaviour?
I need to create the effect of crumpled paper WITH text on it. The image should look like somebody typed a letter on a typewriter, and then crumpled it up and opened it up again.It's easy enough to do the crumpled paper effect, but I'm having difficulty making the text conform to the myriad creases of the crumpled paper, so that it looks like the text actually was crumpled (because, after all, the text is now part of the paper).
I have tried a bunch of blending methods, but am having no luck. Do you think this might be a manual warping job?
I have the following image:
This actually started out as a font, and I converted it to an object with paths using apple-shift-o. I'm wanting to get rid of the balloon around the lettering, but am having a real hard time doing so using the convential methods (ie cutting, deleting the anchor points). When I do this, it seems to interfere with the lettering. How I can accomplish this for a piece of text I converted to an object?
let say we need some text like " CIRCLE" and it should be filled with small circles (Like below) but not clipping mask mean the object should not flash cut on the edge of characters. is there any effect, or we need to do it manually?
View 9 Replies View RelatedI don't know if this is possible at all in Illustrator, but I want to align objects to text paths. Look at the following example.
I start with something like a circular hierarchy, that I get as an output from another program. These are only lines and text. Now I want to add a flag behind the text. This flag should have the same orientation as the text path.
As this hierarchy is actually pretty big (this is only a snippet), I don't want to rotate all the flags manually. I tried to do it manually with the below example, but it still doesn't looks right...
Is this a proper method to rotate the flags according to the orientation of the text paths in Illustrator?
I have two simple text objects (not textarea) and i'm trying to align them vertically to bottom.It aligns these text objects by bounding box, not by base line. How can i align text objects vertically by base line?
View 6 Replies View RelatedWhat is the best way to achieve the effect below, where the square conforms to the shape of the D? Also, how do you make objects or text give way to other text, such as the attached Ugg logo or similar? I know you could put a white stroke, but then that makes the object itself look smaller.
View 7 Replies View RelatedI am new to Illustrator having had to switch from FreeHand recently and can't figure out how to get gradients to flow through non-touching objects. The "merge" option here treats things differently than FreeHand did and only works with paths that overlap.
View 6 Replies View RelatedI have a variable number of text lines I would like to arrange along the path of half a circle. I would like the text to look like each text-string is radiating from the circle (the path I have as half a circle).
I would like to do this in adobe illustrator
I would like the text to be evenly spaced along the path dependent on how many lines of text I have.
I have seen other discussions suggesting either the blend-tool or the brush-tool. But no luck. The blend-tool would make distorted shapes in between, and would twist and distort the text. The brush tool would make each text a little bit 'cone-shaped', and I would prefer having the text without such a 'cone-shape'.
I am attaching a picture that halfway shows my intentions. In this diagram I have started rotating the first 4-5 text-lines. I have more text-strings (just above the half-circle) that I also would like to include along the path the half-circle is indicating.
The final goal is to get each of these locality-names raditing from the tips in the little red tree.
Is it possible in illustrator to align the text along a path like this? It is almost similar to the normal align objects and distribute objects.
I am working on a Mac OSX 10.5 Adobe Illustrator CS3.
I have tried the offset path, however it gets too large. I am looking to keep things simple but need a bit more definition that just a simple outline will give. On this particular image I am looking to create an outline or fill shape behind the words and pistol but wanting to keep roughly the same shape.
View 6 Replies View RelatedI have created custom text, so that each letter in my 3 letter word is a separate compound object.
Now I have made a filled (with gradient) ellipse and rectangle behind the text to create a clipping mask with all 3 text objects. (see image1) However, when I select all the objects and select: object>clipping mask >make, it only mask the one letter, which is the one on top. (see image 2)
However, when I group the 3 letters together, it does not create a clipping mask at all, it shows nothing... (see image 3)
How do I ake all 3 letters be in the mask?
[URL]
I have lost the ability to free scale objects/text boxes etc. in Illustrator CS5. I have to use the scale tool every time I need to adjust the size of something and it is not a sustainable technique in terms of time/productivity/function.
View 5 Replies View RelatedDoes this script also cleans up unpainted objects and empty text frames? Personally, I don't think so because the check of the script in extendscript and illustrator results negative.
var idoc = app.activeDocument;var straypoints = []; for (i=0; i<idoc.pathItems.length; i++) {
var ipath = idoc.pathItems[i]; if (ipath.pathPoints.length==1)
straypoints.push(ipath);} for (j=0; j<idoc.textFrames.length; j++) {
var itext = idoc.textFrames[j]; if (itext.textRange.length==0)
straypoints.push(itext);} for (k=0; k<straypoints.length; k++)
straypoints[k].remove();
I also want to automatically remove all objects who have a white fill (white background) and no stroke.
Problem is a created pdf-file of an html-file of a table that must be cleaned up. There are a lot of stray points, empty text frames, unpainted objects, white "cells" that are also be painted in the pdf.
I'm missing transform handles and unable to edit objects or text boxes in Illustrator CC. How do I fix this?
View 2 Replies View RelatedI have several .dwg files that I use as templates. I run find and replace VBA routines on the template .dwg files, ie find $Flavor$ and replace it with "Grape", and then I save the .dwg to another directory with a new name.
These VBA routines work well for acdbText and acdbMText objects, but I have a bunch of AcdbAttributeDefinition objects in the .dwg templates as well.
After much research about the AutoCAD object model (I'm mostly a Microsoft Access VBA programmer), I have come to understand that these AcdbAttributeDefinition objects are actually "remnants" of a block that no longer exists in the drawing.
Anyway, I'd like to convert all of these orphaned AcdbAttributeDefinition objects to acdbText objects in the templates and then delete the AcdbAttributeDefinition objects. I have some code that does just that.
However, the issue that I am having with the code is that the newly created acdbText objects are not on the same layer that the original AcdbAttributeDefinition objects were on. I don't know the syntax to identify what layer the AcdbAttributeDefinition object is on or how to specify what layer on which the acdbText object is created.
how to keep the acdbText objects on the same layers as the original AcdbAttributeDefinition objects during the conversion and deletion process?
Here is the code I am using currently:
Sub AttConvert(dwg as string)Dim oDocument as AcadDocumentDim ent as AcadEntityDim aa as objectset oDocument = Documents.open(dwg) For Each ent In oDocument.ModelSpace If ent.ObjectName = "AcDbAttributeDefinition" Then' DO SOMETHING TO IDENTIFY WHAT LAYER THE ACDBATTRIBUTEDEFINITION OBJECT IS ON
' DO SOMETHING TO SPECIFY THAT THAT IS THE LAYER TO CREATE THE ACDBTEXT OBJECT ON Set aa = ThisDrawing.ModelSpace.AddText(ent.TagString, ent.InsertionPoint, ent.Height) End If Next ent For Each ent In ThisDrawing.ModelSpace If ent.ObjectName = "AcDbAttributeDefinition" Then ent.Delete End If Next ent End Sub
How does one remedy this Adobe error message? "Can't scale the objects. The requested transformation would make some objects too small to use." This one always gets me. I'll spend more time trying to find the object in question. This has happened in almost al versions, but this time it's CS5.
View 3 Replies View RelatedOk im a trying to manipulate an image or make one to look like somone on an operating theatre, i want to add text in a stitching/suture type effect to the body part (see images) I am trying to manipulate the picture so it is a portrait image like the second picture.
the one that i have quickly edited to give a quick example (the breasts) is at an angle, and i want it straight, also so i can add more text to the skin part. Does anyone know where i can find an image like this or manipulate one or even make one from scratch?
In the work I do I rescale and warp layers. My question is, is there a way to make the layer i am transforming be displayed as edges, or translucent. This would greatly help me match the layer to the original image.
View 3 Replies View RelatedI have AutoCAD 2011. A previous employee of this company made a dwg that had a road map overlaid with some polygons representing areas of this or that. The road map was made of lines, polylines, etc. As I hovered the mouse over the roads they highlighted as if to be edited. My co-worker insisted that there was no way he drew the map and must have uploaded it.
The reason I am asking is a current project we have has many maps available as pdfs and other formats. I know how to upload a pdf as a back drop but do not know how I can upload anything not a dwg that can be edited or changed.
I need to manipulate digital newspaper clippings from the early 1900's in order to enlarge and create a readable hard copy. The pdf's that i am getting from the NYTimes are often miniscule - like microfilm. They are always a PDF and I am looking for the most efficient way to create (multi-page okay) readable copies.
View 2 Replies View RelatedI can't seem to find a way to edit (or at least delete) the alpha channel of an image with transparency in Photoshop.
Ctrl-clicking the thumbnail of the layer and editing it in the channels tab is not what I mean...
Take a gradient, from Red 100% Opacity to Blue 0% Opacity. After I saved the gradient as a PNG, how can I for example use the levels adjustment on the PNG's alpha channel?
If I open the image in After Effects there is an option to control the alpha channel. That's quite embarrassing if a video software can edit the alpha channel and an image software can't...
I've attached screenshots to demonstrate what I mean.
i'm trying to take some photos and manipulate them to look like drawings without using the basic photoshop filters....
i'm open to trying different kinds of styles. anything from something like in the movie "Waking Life", to the Power Puff girls style of animation.
Even if i could get the photos to look like a water color painting would be cool.
i've been playing with them alot in photoshop and illustrator, but I just havent found a result I'm happy with yet. although, I only have the basic default photoshop filters here.
There are 3 elements there. the top of the clap board was placed before i started tryinbg to create the slanted dashes that are on the average clapboards. The white dash was skewed using Object > Transform > Shear. Then i attempted to rotate it to fit.
I need 4 of these skwed white squares / trapezoids on the top along with 4 to match on the top of the larger potion of the clapboard. I do not want to eye it as it will be a part of a logo.
What would be the best method to use?Is there a way to draw the 4 rectangles on top of a perfectly horizontal long black rectangle and skew the white dashes at the same time?Is there a way to skew based on the dimensions of the longer black rectangle?
create a short animation of the model rotating in 3-D space by using keyframes in the timeline panel.
1. I cannot drag the end of the layer to the right in order to increase the duration of my animation. The layer seems to be locked at 15 frames in length. How do I increase the duration of my 3-D layer so I can create a longer animation?
2. The bounding box for the model extends very far into z-space (much further than nesscessary to simply contain the model) which is making the object difficult to maniputale. How do I change the dimensions of the bounding box to more easily manipulate this model?
Is there any way in PS6 to NOT have the vector stroke automatically selected when selecting a vector element in layer panel? I am no longer able to see the 1-2 px strokes clearly as I am tweaking stroke-effect in real time as I am modifying them.
View 2 Replies View RelatedIn Vers 2013, IV finally added the ability to manipulate a [3D] spline by dragging the control handles (way behind the curve on this one).
However, dragging "a" control handle causes several of the other control handles to shift as well. Puts a big limit on the ability to customize yout path. Splines are supposed to be one of the unrestricted free form tools for modeling.
Is there any way to turn this "feature" off ? I need and should be able to have discrete control on each control handle. (I had this way back in SW)
Also, there is no 'axis' for the control points unless you count the const lines that connect the control points and I don't. I should be able to select an axis and be able to shift the direction and level of influence of each side of the control point axis.
How do you keep very small sized fonts looking good when manipulating them, as in using arc, skew, transform? I can manage this fine on bigger sized fonts, but when I want to make a very small font size arc (for ex to use on an avatar) it ends up looking blurry and not crisp and clean. tried pixel fonts but that was totally unreadable.
View 3 Replies View RelatedIt seems to me there is a way of manipulating Inventor views using matrices. There are Matrix objects, and the cameras can get/set the view to World Matrix etc.
Is there any good documentation on this? I would like to mimic OpenGL behaviour in Inventor, for example applying translation matrices to the view in order to move stuff around.
Using VC++
I have a number of images (faces) that I want to use for 3D texturing, but to use them, I need to do a few things:
1) open the eyes wider (whenever the subject is squinting);
2) Flatten the lips into a neutral position if smiling or frowning
3) Close the lips so teeth are not showing at all if the subject had mouth open (talking or smiling)
Best ways to do this in Photoshop (CS6) or if I'm better off using a different program. I'd like to keep things as 'photo realistic' as possible, though doesn't really have to be perfect - just don't want jagged edges or cartoon appearance.
I'm trying to get use to it.But I just have the problem that somehow the axis are all very small.
Like the axis when I want to move, rotate, scale,... sth.
And the size stays, no matter if I dolly, therefore it's sometimes difficult to click the right axis.