For saving a jpg:In SAVE FOR WEB: What's the difference between Type Optimized & Art Optimized? THE BOTH GIVE THE SAME EXACT TOOLTIP HINT.WHAT IS sRGB & why would I use that?
What's an ICC profile. When would I use it?
I need to save a drawing file and give it the name of my desire using a single command, I don't want to issue "saveas" and then specify the name in the file name prompt. This problem is has been faced when I was using ScriptPro and I couldn't succeeded to do that. Hence I need to know if it is feasible to do the stuff using a single command. It will be preferred if I can choose the location to save the file also rather than save the file to the default location.
View 2 Replies View RelatedI've created an action that uses the save for web dialogue to optimise images for the web. When I use the batch command to process a full folder of images, even though I have "Override action "save as" command" checked, it ignores this and still uses the location that was used when the action was created.
Apparently this is a known issue in CS6 and previous versions but whether this has been fixed in Photoshop CC?
when I try to edit group or save group as separate Revit file, Revit crashes. Sometimes, it keep processing the 'save' but the group doesn't get saved; doesn't show in the folder.
View 1 Replies View RelatedI made an action.
at end of action I did save to desktop.
Is batch, I check overide save as.
because I now want to save all files to a new folder.
But images are batching to desktop.
(I've also tried it with that uncheck-- still going to desktop)
When I use the "pull down"menu and select a file format to "save as" The actual file format name is off by 1.
Example: In the pull down "format" menu the order of the formats is
Scitex (sct)TIF
Photoshop 1.0
When saving "test.psd" as a TIF file, the name in the "save as title box gets a .sct extension (Test.sct). In order to actually save as TIF file I need to select Photoshop 1.0 and the title will receive a tiff.
I have recently upgraded from CS4 to CS6. After editing a jpeg, I try the Save As command and recieve this message...."could not complete the Save As command because there is not enough memory RAM" I also notice that all my images are at 72 dpi, is this going to affect image quality? I shoot in the largest file possible when taking the photographs.
View 11 Replies View RelatedI am in PS 7 (Yeah my knuckles drag a little but I can't afford to upgrade)
Everything works great until I try to save the image, then it freezes but not completely.
I can still move around but all of the menu items are dead and nothing works.
I have re installed 6 times and still the same.
I want a part automatically to be "saved as" in my workspace.
there is the command
ThisDoc.Document.SaveAs(NewFileNameAndExtension , True)
in the browser of iLogic but I don't know how to use it.
I tried ThisDoc.Document.SaveAs("partname.iam", True)
but that's couases a error.
I would like to know if there is a lisp that would run every time I run the hatch command? I have autosave on, but I never remember to do a good clean save before I run hatch. I remember as autocad locks up and crashes! I would like a list that would prompt me to save when I hit hatch with option of yes, save or cancel. is this a tall order?
View 9 Replies View RelatedI have AutoCAD 2010 on a 2002 Windows XP Professional system. I do not know what I did to cause it but when I do a "save as" using the button, I no longer get a window. I can only save through the command bar. I cannot seem to change the save to folder using the command bar so I really need to get the window back.
View 3 Replies View RelatedI can't save photos for web anymore, there is some problem with plug-in. Could't find the plug-in entry point. What can I do?
View 20 Replies View RelatedI am trying to "save as" a dxf several shapes in a drawing. Except that when I use my mouse wheel to zoom in, I get this odd message:
"xxx.dwg" has a command in progress. Hit enter to cancel or [Retry]: *Cancel*
Never had this happen until this morning.
I know that there is a Save All command in express tools but if one does not have express tools installed or loaded how can they access this Save All function from the command line?
View 9 Replies View RelatedI have an ilogic rule to open an existing excel file template and export the inventor parameters into it. I am trying to find a way to then save the excel file as a different filename. This way the original template can stay unmodified. I have found the GoExcel.save command but is there some sort of GoExcel.saveas(filename, filepath) command?
View 2 Replies View RelatedI am looking for "best practice" example code for saving/re-using command default values from previous user input. Similar to lisp globals, but for C# (or VB.net); ie next time the command is run in a given session, the user's previous input is the default <>. I am currently using Properties.Settings to persist these values.
View 3 Replies View RelatedI would like to save my opened dxf drawing again as dxf with one click by custom button.
I was trying the next code
^C^Cdxfout;;y;v;2004;16;;
It returns the message "Can't open file", it seems like it does the save only when initial file is dwg.
The goal I wish I click a custom button and will save my opened dxf drawing back to dxf in 2004 format.
I am trying to find the command of Save as... so I customize it and make it a short curt...
View 2 Replies View RelatedIn the menu under File there is a command "Close and Go to Bridge" Is there a way to do something similar for returning to Lightroom after a "Save"?
View 1 Replies View RelatedHow to save files with spaces insted of dashes in Save for Web dialog window in Illustrator CS6?
View 9 Replies View RelatedI am unable to get this code to launch the File Save As Command. I Think I have the sytax correct, because if I Replace "AppFileSaveAsCmd" with a different command name (i.e. "AppFileNewCmd") it works as expected. I have tried this with "AppFileSaveCmd" and "AppFileSaveCopyAsCmd" and both have also failed. It seems any kind of save command wont work... I am trying to creat a rule that will fire on "New Document" iTrigger that will Force a user to save the newly created assembly document in preperation for further iLogic rules that depent on the assembly Filename and path. Maybe there I am not telling it What file to Save? I have pasted the code below..
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 3048 StartFragment: 314 EndFragment: 3016 StartSelection: 314 EndSelection: 314
SyntaxEditor Code Snippet
[Code]....
I need to find a way to find a good replacement for "SAVE" command to use it within Reactor. I want to save A COPY of my current ("active") DWG document to another place *without making it current* (just like command "SAVE" does and did it always). I know I could use (vla-saveAs ...) to save it first to another Folder and then use (vla-save ...) to save it back to its current Folder, but there must be a way to do it simply and fast.
View 9 Replies View RelatedI'm using the save for web function to save a large number of files (not batch saving)usually, when I open a file and start saving for web, it will remember the folder that I most recently exported to, and by default open that folder for that file, until I "save for web" into a different folder.
Out of seemingly nowhere, the save for web seemed to "forget" this folder (and any other folder I tried to save to), and now defaults to the "Documents" folder, causing me have to click through to find my intended destination folder. I'm on CS5 & Mac running Mountain Lion. On my work computer (exactly the same, Mac + Mountain Lion) I am using CS6 and have not encountered this issue.
I have an action which applies Levels and Curves to my black and white TIFFs. At the end it "saves as" a JPEG. Originally it saved them at quality level 10 but I re-recorded the action to set the quality at 12. However, since this change the action keeps saving as into the folder where the image I used for the re-recording was located.
View 1 Replies View RelatedIn Illustrator CS4, from time to time I will be working on a document, and then go to save it, but instead of the usual "Save", the program acts as though I've selected "Save As". The result is that I have to write the same file overtop of the existing file!
View 1 Replies View RelatedI'm having a problem throught CS6 with the Open, Save, or Save As dialog boxes not opening for a period of time after clicking on the desired functions. It can take over a minute just to get the Open dialog box up to browse for a file. Eventually, the dialog boxes open, but during the time that it's trying to open, the program is unresponsive. It is happening with all of my CS6 programs. I have unistalled and reinstalled with no fix. The programs are updated.
View 4 Replies View RelatedIs there a key command to do what you just did? For instance, I build charts and sometimes I need to rotate every piece of the chart by 90 degrees... one piece at a time. Is there a key command that will just let me repeat this over and over? I'm using Illustrator CS6 on a Mac.
I don't want to rotate the whole chart, just pieces of it... that's why I don't just select all and rotate at once...
I've tried to nail down exactly when and why this happens but have yet to figure it out. Usually happens (but not all the time) when I'm using the path tool and hit command+z to reverse a node I've created, but then the cursor swtiches to the magnifying glass/zoom tool.
View 3 Replies View RelatedI just upgraded my iMac from Snow Leapord to Mavaricks 10.9 and Illustrator CS6 or Illustrator CC will not respond when you try and open a file. I tried Clicking on File/Open and also Cmd+O and it will not bring up the open dialog and will not respond and I have to force quit the program. If you double click on a file it opens but when you try and save it, the same thing happens, not responding and have to force quit. It also happen in Photoshop.
View 12 Replies View Relatedis there any possibility to start a second illustrator instance/process; perhaps by command line parameter? If I open illustrator with "illustrator.exe c: emp est.ai" and illustrator already runs, the existing process is always used.In a specific use case test.ai should be opend in a new process if illustrator runs or not.
View 8 Replies View RelatedI'm making an extension panel, and I want to convert some fat roundendcapped lines to paths, but it seems there's no command for this in the SDK.
Object -> Path -> Outline stroke
I made an Action that calls Outline stroke from the menu, but then I got stuck again, because I can't find a way to call that action from my panel.I see Photoshop has an ActionList stuff. I'm looking for something like that in Illustrator.