I'm currently designing a transit diagram in Illustrator CC, but I'm having some trouble with snapping. I'm working on a grid with snapping on, with 10px stroke paths. An example of my problem is as follows: I have a 90 degree path laid out and I go to make a 45 degree diagonal off it using the shift key, but the end of that new diagonal ends up on a half pixel. See the picture below:
You'll see the end of the path on the right is at X 630.5 and Y 185.5. I'm working on a 10px grid with 10 subdivisions. How can I make it so it snaps to whole pixels only, this is really infuriating!
snapping to the pixel grid. I even have the "Snap to Pixel" turned off and the vector paths are being altered by illustrator so they visuall fit in the pixel grid. I've never experienced this before where illustrator actuall moves the anchor points where it wants.Here's a vector path on a grid created to show where the pixels are:
I select the object, swap the FILL to the STROKE and right away you can see that illustrator altered the location of the paths.I swap the STROKE back to the FILL and it alters the paths even more!Here's another example:
The paths clearly are not aligned with the pixel grid, but illustrator is trying everything it can to make the pixels line up. (This graphic has "Align stroke to inside" and is in pixel preview). Same thing but not in pixel preview.I made sure snap to grid and snap to pixel is turned off and still to no avail.
I wanna use to shapee tool or whatever- ractangle tool- Generally said I need to create some shape. But at photoshop is everything snap my new shape to pixels. Like in the backroground is some invisible pixel grids and everything is snaping to whole pixels. I dont want this. I Want to use whole space without automatic pixels adapting to my shapes. I want to be independent in creating my shapes without snaping to pixels grid.
And also want to ask you. If you would like create new guide lines it is non dependable on pixel grid. But after it when I want to snap my nex objects to it- it not possible. And when I tick in preferences/ general: ,,snap vector tool to pixel grid" everything become dependable to pixels and everything is snapping to pixels. I don t wanna this…
When the modify dimensions box is open, the 'roundoff' menu gives me 1/16", 1/8" etc, even when DECIMAL is selected as the unit format.
This wasn't happening earlier, not sure what's going on. [in fact in a solved problem from earlier, a colleague found a drawing that had units set to millimeters, had its insertion scale set to inches! Different computer, so not related].
It seems there is no way to stop illustrator (CS5) from snapping to the edge of the artboard. Even if you hide the artboard, it still snaps to the invisible artboard.
is it possible that the brilliant folks at adobe missed this one and there is no way to disable this snapping to the artboard?
I'm having an issue with CS6 where my objects don't want to snap together. I have snap to point checked but it still won't work. Also when I hover over point or intersections it doesn't say "intersections" or "center" or etc beside my mouse.
I am trying to edit a JPEG. It is one layer. My mode is Normal with 100% opacity, 100% fill. The layer is not locked.
I can use several tools including move, magic wand, paint bucket, crop. However, I cannot use the eraser, paintbrush, healing tool, clone stamp (which is the one I desperately need to use) or many others.
It seems that in CC the Free Transform tool does not snap to grid when resizing (for example) a rectangle. If I have "Snap to Grid" turned on, it only is taking effect with new objects getting drawn. Am I understanding this correctly? If I draw a rectangle, and want to reshape/resize it to fit the grid, how do I do this? It's a bit embarrassing asking this question, but CC seems to have changed some things from CS6.
I am using Illustrator CC and recently I have noticed that I can no longer snap and aligh objects to each other (with the automatic highlighted green color, which shows you the center, intersect e.t.c). As well as the Live corners aren't present, after pressing Direct selection tool nothing changes. None of the settings were changed, at least I was ticking snap to function back, but it didn't change anything again.
why I just can't see the Live corners? I was also able to see the green lines between shapes before, but now it isn't working at all. I am running it on Windows 7.
I draw a circle and then want another smaller circle to snap to the path. This would produce 100% accurate smooth curve.
I added a line that snapped to an anchor point I added on the large circle. I was hoping to snap the smaller circle to the anchor point, but how can you do this without guessing where to add anchor points on the circle? What if I want to change them?
Right now I have snap to point on and snap to grid off. Align to pixel grid is also off.
I'm creating SVG icons, and due to the removal of SVG as an output format for Save for Web, I've switched to having a series of 16x16 artboards for my icons. Problem is, no matter what snapping features I disable, my artwork still snaps to the artboard edges when I move it around (regardless if I use the mouse or the arrow keys). This makes it impossible to align artwork to such a small artboard, and it also seems like pixel snapping shuts off, causing mis-aligned artwork.
Failed solution: View menu >> Snap to Pixel disabledView menu >> Snap to Point disabledView menu >> Smart guide disabled Transform palette >> Align to Pixel Grid disabled
Workarounds: Set Keyboard increment to 0.5px, which will round up to 1px in Pixel Mode. Keyboard nudging now behaves as expected, but mouse behavior is still erratic.Use the Free Transform tool. It behaves slighly less erratically than the Selection and Direct Selection tool.
Steps to reproduce: Create a new document, 16x16 pxVerify that you're in pixel modeCreate a 14x14 px squareTry and position it in the center of the artboard using the mouse or keyboard incrementsObserve the artwork snapping to the edges of the documents, or bypassing snapping altogether.
In Illustrator CS5 my anchor point handles are snapping to specific angles,which I don't want. I have to turn off Smart Guides to freely adjust the handles.
Under preferences, Smart Guides, I turned off the custom construction guides, but even this did not correct the issue. I love using Smart Guides and I thought there were just in face that 'guides' and provided no snapping.
I also tried turning off 'snapping to point' to see if that was creating an issue, but no dice.
I can provide my system settings in case:
Mac OSX 10.8.4 16 GB memory Illustrator CS5
Wanted to ensure I was not missing a feature I couldn't find or research before trying to reset my preferences.
I've got a bit of trouble with Illustrator that I assume has a really simple answer but I can't seem to find the preference for it. My objects seem to be snapping to place but, as far as I can tell, I have all those settings disabled.
Things to note:
View > Snap to Grid > Disabled View > Snap to point > Disabled Preferences > Selection and Anchor display > Snap to point > Disabled
We first get a digital proof form printers as .pdf. Sometiems they save them with PDF compatible on. This makes my job harder because will get ilustrator asking for all the links when opening the .pdf.
What we do is open the .pdf form the printere, adn paste this on topof our orignal .ai file. This is to proof what theyt changed. Adding in theri product numbers, adn updating the UPCS is about all we want to see. What we look for is shifting type, or missing elelements.
As you can see by the screenshots, this logo is vector and shows up perfectly in PHotoshop. (it was created in Photoshop and is a layered Vector PDF). I bring it into AI, though and the top portion of the talking heads disappear. Though their shape oultines remain. A grey box shows up when I click a lot. I am really a photoshop gal, so all this Illustrator stuff is foreign to me. I'm thinking the grey box is containing my art and only showing what falls within it? How to expand it or remove it so that all my logo will show up in AI?
I have some negative space I created(black area, see first image) that I want to fill with type, not just a simple fill.
Basically I want to create the negative space from a bunch of small minus signs(-) that need to line up as they go across. If I type on each path one at a time as the text doesn't line up that way. This needs to be one continuous path. (see second image)
Unfortunately if I add them together, it creates a compound path, which you cannot type on, unless I am mistaken? So I need them to be a path, not a compound object.
I've tried every permutation of copy and paste; I renamed the path to path. It looks like a path when I add stroke, but it does not behave like one. I can't cut it or join it to any other path. It remembers it's text path status. I'm running OS X 10.7.5.
I accidentally converted a path to a text path. I searched the forum for how to convert it back to a regular path. The answer I found said to select the path and hit Command+C+F. This gives me another text path! I now have at least 6 copies of the path in my files but they are ALL text paths and none are visible with a stroke.
how to make a circle split in half with the top half black and the bottom white. I've made a circle with a 37 pt black stroke, now I just need to make half of it white.
I created a pattern in illustrator, and then I created an object, and I wanted to fill half of the object with the pattern, so I used a clipping mask to do this.. however, now when i try to group everything together, the clipping mask in released and the pattern spills all over the artbaord... when i try to copy and paste into a new document, everything is pasted as white instead. When i try to merge the layers, the clipping mask is released...
How to keep the clipping mask from releasing.. Also, I tried rasterizing but that doesn't work either and it makes my shapes all rough and choppy!
I've got two paths. They don't intersect, exactly, a straight path ends at a curved path, but I need the end of the straight path to be curved, to make it look like the two meet perfectly. The two gray paths (a single path, then path->offset for the second) are the outside of a shield shape. The two black lines (paths) just surround text, but currently they overlap the gray paths.
I created text on a curved path using the pen tool and the the type on a path tool. However, there are portions of the text that I want to taper. For example, my text begins horizontally, continues to the right, and gradually curves downward. As the text curves downward I would like it to taper smoothly into a narrower and narrower text.
