In CS6, I could import (open) DWG files and it would correctly categorize the input objects into separate layers. In CC, it is putting them into a group in a single layer, which is a big usability regression. Is there a fix for this?
View 18 RepliesI am having trouble processing point code to correctly string the survey points. I have tried three methods of coding and each method has a draw back which isn't really acceptable to me, as it either means more work in the field or more work in the office.
Method 1: I code my points TOP 1 B, or TOE 2 or NS.
When doing this method the survey points don't string correctly. Because of the space delimitation inbetween TOP & 1 Civil3d only recognises the code TOB and doesn't pay attention to the string number. So all the points with the same code get stringed regardless of the string number. Please see file "TOP_1_B_CODE_STYLE.png" and you will see that TOP 1 E strings to point TOP 2 B.This will create a lot of work in the office breaking all the survey figures so they appear correct.
Method 2:I code my points TOP1 B, or TOE2 or NS. When doing this the points don't get coded correctly. Because the code is TOB when I import a point with the code TOB1 it doesn't recognise the code, and puts the point on the default layer 0. Please see file "TOP1_B_STYLE.png" and you will see all of the TOP1 and TOE1 are white and one layer 0. This will make a lot of office work changing points to the correct layers.
Method 3: I code my points without a string number, and only pickup one line at a time. So I would start picking up a toe of bank by TOE B then finish it on TOE E. See file "TOP_B_TOP_E.png" to see the result.
This does get the result I want but it really makes field work procedures slow. It would be very frustrating doing a detail survey of a road and having to walk each individual breakline.
I want to be able to use Method 1 but to have all points get stringed correctly. I have read a pretty good post about this here where the outcome is that all points should be put on layer 0 by default (I can't find it again though!). For me though that isn't a very good option as I often have both design and asbuilt in the same drawing, and need to be able to turn off groups and not have the associated points left on my screen.
On my iMac, LAYERS don't display correctly in Illustrator CS6.I create 3 layers. When I set "don't print" to the upper layer (Calque 3), the display of the panel isn't correct anymore. The 2 other layers disapear in the panel, but on the workbench everything is still ok.
When moving the layer (Calque 3) down, the display of the panel becomes ok again. But my drawing request that I don't change the layers's place.
Is there a method to import Layers from existing DWG file to another? I want to import all layers with their names.
View 3 Replies View RelatedI want to create a whole load of layers (approx 150) by importing them from a xls spreadsheet into my AutoCAD layer manager. How this is achieved without having to create each layer at a time by manual entry? Note that I created a .las file (attached as a .txt version) based upon exporting an existing set of layers to a .las file and then amending it. However, after saving the amended .las file it would not re import into the layer manager.
View 1 Replies View RelatedHow do I set my Illustrator file to print clearly?
I am designing a simple label (3.75 x 1.25 inches, black and white) that is mostly text based. I tried printing directly from Illustrator and also as a converted PDF (high quality) and the results are the same - slightly blurry and fuzzy text.
The printing problem seems to only happen when I try to print Illustrator files and PDFs converted from Illustrator. (Printing with a laser printer.)
So, I'm trying to create a repeat pattern of a Balloon illustration I've done in Adobe Illustrator. I've got the singular file (balloon.ai), which weighs in at around 700MB.
Now I'm trying to create the repeat of this pattern on a separate Artboard which will repeat these balloons, 30 balloons per repeat square to be precise.
What would be the best way to import these separate balloons into the repeat square once (as they're the same file) without affecting the weight of the file and performance of Illustrator?
So, in essence, is there a way to import that balloon.ai file and only have it use up 700MB on the page rather than 30x700MB by the time I've placed 30 balloons?
I can't rasterize the files as the printer needs the raw file.
I just purchased AutoCAD 2012. I am having issues with the layer controls. for example, I make a new layer in the layer properties box. I then assigned it a color, line type and make sure it is on. When I go back to the drawing in the model space the color is not changed, same with the line type and the layer is frozen.
I don't know what is going on. I have tried to regenerate the drawing, switch to the layout tabs and back. Nothing seems to work but one thing. I go up into my ribbon where the layer properties are and nothing is changed as I have defined it in the layers properties box. Once I change it in the ribbon it applies to the drawing.
Is there a variable that I am missing with the new version or what is going on?
When I import 5D III cinemadng's into Premiere 7.1, the footage comes in with a weird pink overlay. It's not just a tint shift, but some sort of color distortion. After Effects and Photoshop both read the file just fine via Camera Raw.
View 31 Replies View RelatedI automatically updated last week for my 2014LT and since then the LAYERS hasn't worked properly. Layer Manger still seems to work correctly, but the Layers tab on the Home ribbon does not. I am running Windows 7 Ultra, Quad Core i7 with 16 MB of Ram, and had been running without errors until this last update.
When/if I select the "Freeze Layer" tab from the top ribbon, and then select the layer on the drawing it turns it off as it should, but if I then use the pull down to locate the layer and turn it back on, nothing happens. It does not appear again; it may not even show up now (see below). I found that if I go to LAYER MANAGER and turn on the layer it still doesn't turn on unless I turn it off and then back on; which will bring it back unfrozen. Also, some layers when frozen do not then show up on my pull-down list or LAYER MANAGER list unless I save the drawing and restart 2014LT. The layer then shows up on the Layer Manger and ribbon.?
Just love updates when everything was already working properly, and then they don't after the "Update"!
i upgraded to CS6 photoshop and now i am having problems with multichannel photoshop files not importing correctly into CorelDraw x6. Either no channels appear at all or some will be missing or misnamed.
i realize that X6 may not have the latest and greatest import filters for the latest in Adobe products.
i have even saved the psd files as rgb and grayscale, hoping the issue was just multixhannel but that did not work.
I'm looking for a way to import text from a .txt file but I'm totally lost.
View 2 Replies View RelatedI am having an issue with plotting a drawing that includes an xref. I have also included an attachment as reference.
I am working in AutoCAD 2010; I have a drawing that includes another drawing as an xref. The xref is on layer “0” in model space and my titleblock, annotation and viewports are in paper space (layout tab). I am using color dependent plot styles (.STB). The xref is a 3D model created with basic AutoCAD solids representing steel shapes, there are also some line segments representing the steel centerlines. The viewport is a plan view of the 3D steel model, the view is not clipped. Since the xref contains 3D objects when I print the drawing I don't want the “hidden” lines to show up, I accomplish this by setting the viewport shade plot setting to “HIDDEN”.
Here is the problem:
When I print the drawing the xref’s layers do not print correctly but rather take on the properties of layer “0” which has a plot style of “NORMAL” so everything prints in color and with a default lineweight. I want the xref to print using the xref’s layer properties that are defined in the .STB file. One variable that changes the outcome of the printed drawing is the viewport shade plot setting.
If the viewport shade plot is set to HIDDEN the xref prints using layer “0” properties (undesired) and the3D object lines are hidden (desired). See attached Viewport #1
If the viewport shade plot is set to AS DISPLAYED the xref prints using the xref’s layer properties (desired) but the 3D object lines are not hidden (undesired). See attached Viewport #2
The ONLY difference between the two viewports is the shade plot setting, there are no layer overrides and only the xref objects are affected, the objects in paper space print as expected. This only happens with an xref or block. If I bind the xref into the drawing and explode it so the objects are “live” in the drawing everything works fine. Unfortunately I need it to work correctly with an xref.
If I use a color dependent plot style (.CTB) where the .CTB file controls the color and lineweight I am able to achieve the desired results, unfortuneatly my company is determined to use .STB files
Adobe CC layers setting for exporting a Ai file to Photoshop PSD file
View 4 Replies View Relatedi have a deadline approaching to create a brochure. I have been using illustrator to create my page designs using a combination of photography and vector work and was wondering if i select everything within the document and convert to cymk wether this has indeed converted everthing including the Photos. I was also wondering is it best to save my files as PDF's before importing into Indesign to reduce file size or will the quality be better if an ai. file? It is a 200 page brochure and i am the sole designer as an intern at a travel company
View 4 Replies View RelatedI've been using Illustrator since the late 80's but this request just now came up for the first time, twice in one day: the clients each want me to send them layered files (OK-no problem) wherein all the layers, even the raster layers, register as vector layers. Or at least all the layers, regardless of file-type (vector or raster) are contained within an unflattened Illustrator file. One of the clients specifically asked that the Type layer (No problem-all the type is on one layer) be "vector mapped", whatever that means, while all the other layers can be Photoshop layers, if necessary. So how do I hand them an open, unflattened Illustrator file containing both vector art and raster art? Can it be done in Acrobat, as a PDF? I'm working in AI and PS CS5, but I can and will upgrade if I have to.
View 4 Replies View RelatedWhen importing an SVG file, I woould like the top level SVG groups to be imported as separate Illustrator layers. Instead, Illustrator creates a single default layer on importing teh SVG file, and adds the tree of groups under that layer.
View 2 Replies View RelatedI have a large list of custom colors in Excel that has the color name and CMYK breakdown of each color. I'm looking for a way to import this information to create a custom Color Swatch Library. That will have the name of the color and the CMYK breakdown. So that I can easily use in Illustrator and Photoshop. Is there any way or application in doing this with out manually entering the information and creating a new library?
View 7 Replies View RelatedI have created a layer and copied it to a new layer. I want the copied layer to completley cover the eixisintg layer but it won't move right to the edges, it leaves an outline of the previous layer. How can I get it to completelety cover the layer?
View 4 Replies View RelatedI have ten Illustrator documents with appr. 100 layers in each document.
Each layer in all documents are named correctly for automatic script exporting to PNG files.
Now I want to import all layers from all ten documents into one master file. And importantly, I want to keep the exact names of each layer.
I frequently save layouts I do in Photoshop as PDF's. Lately I very often will discover the text does not display correctly in the PDF. One or two lines of text will display as white with a thin black outline, rather than as the basic solid black I'd specified.
I work on a Windows 7 machine with the current version of PS. The text is on layers when I save the file to PDF (from PS), but I do not include the layers in the PDF, so they should be flattening down.
I noticed a few weeks ago when it was also doing this that I updated the program a day later and the PDF's were not exhibiting this issue. But, now it's starting again.
I was wondering if there is a way to import a bunch of detail drawings into my template, without all the layers that go along with the details.
See, sometimes I need to use details from other companies within my drawings, and they have crazy annotations and a lot of different layers. It would be nice if I could import their details as one big block into my template that I like to work with when doing my work. Is there a way that I can import that details block (including its color codings and such, not changing anything) onto ONE LAYER. Otherwise is there a way to create like a folder within the layer manager that I can dump all those layers?
It's just such a mess once I drop their details into my work, it would be nice if I could isolate all that stuff, yet keep everything as it looks on their files..
When I tried to open a big project I been working for many days, I get this error message:
I Need to urgently fix this issue, since I cannot see most of my layers on the file after it opens.
I am using Adobe Illustrator CS6, on a macbook Pro device.
Could it be possible like the way in Indesign, placing the PSD file and able to select different layers of PSD files?
View 1 Replies View RelatedI've made an animation in photoshop CS 5.1 with three layers that I want to export to Apple's application Motion in order to work on each layer individually. I can easily make a quicktime file, but I can't work on each layer this way. When I import the photoshop file I get the prompt "All Layers," which I choose, but there is no movement when I hit play on the timeline. Only one frame is displayed when there are a number of different frames, and animations.
I'm using an IMac with 8 gigs of ram and 3 external hard drives with a terabyte internal drive.
Working with layers in Paintshop Pro X6 instruction # eight says: To resize (the layer that I just placed on my background image) click on one of the corner nodes and drag outward. But no corners or nodes are showing for me to drag the layer to where I want to position it. It seems like a step is missing from the instructions.
So as it stands, I can get my layer onto the background image but I can't resize or reposition it at all.
I 'm looking for a method to import the layers that I have exported from Civil 3D 2013 and have edited in Excel.
View 2 Replies View RelatedI need to edit a Photoshop PSD file that has layers.
I believe vector lines can be edited in Photoshop but I only have PS Elements and can only edit the text.
I do have Illustrator CS6 but when I open the PSD file it will not open to separate layers, even if I choose this in the open options.
Maybe Illustrator cannot do this?
Is there a script that can create layers with csv file?
View 5 Replies View RelatedI am running a script that batch places the name of the document in the image and then saves the document, for all documents in a foder.However, it refuses to place this text, as the target layer is initially locked. So I am looking for a piece of script that I can add to this script which will first unlock all the layers in the document.
View 3 Replies View RelatedIs it possible to manage layers of a PSD file into Illustrator? I placed a PSD file whick contents 3 layers into Illustrator. In Illustrator I would like to be able to open and close the layer from PSD file (as it can be done in InDesign).
View 1 Replies View Related