When I import 5D III cinemadng's into Premiere 7.1, the footage comes in with a weird pink overlay. It's not just a tint shift, but some sort of color distortion. After Effects and Photoshop both read the file just fine via Camera Raw.
View 31 RepliesIs there a method to get the Pocket Camera CinemaDNG files to work in premiere ? (or Speed grade?) They work as individual frames in Photoshop. Apparently they are "compressed" CinemaDNG files.
View 28 Replies View RelatedA week ago all was well in Premiere Pro CS6 world. One day I updated Windows, next day all but a few .mp4 video files opened in Premiere Pro, played fine as well, EXCEPT for the fact that the display now has green (sometimes multicolour, sometimes a solid green block) bars in the lower third of the screen. See screenshot below.
These same files open/display fine in After Effects, Photoshop and VLC- and Quicktime players. I'd read something fromyears ago about Windows Updates causing this, so removed one of therecent KB's to no avail. I did install AdobeMediaEncoderTrial_64-6.0.3-mul-AdobeUpdate and DynamicLinkMediaServerRetail-1.0.1-mul-AdobeUpdate and reverted to Quicktime 7.6 but nothing makes a difference.
In the end, I formatted C:, reinstalled Windows 7 Ultimate 64bit, downloaded/installed about 260 updates and reinstalled CS6 (and then the aforementioned AME and DLMS updates and QT7.6) but it's STILL the same problem.
Also tried exporting (part of) one of these files, just to see if it wasn't just a display problem: the exported file with the same properties as the original also has the green bars.
Command 'R' to render out a clip? Each time I do it Premiere Pro whips me back to the start of the timeline. I've started up a new project.
I'm wondering if Premiere Pro will have a plist file, mmm, maybe I will go look ..
using the FCP7 keystrokes in PP CS6.
i upgraded to CS6 photoshop and now i am having problems with multichannel photoshop files not importing correctly into CorelDraw x6. Either no channels appear at all or some will be missing or misnamed.
i realize that X6 may not have the latest and greatest import filters for the latest in Adobe products.
i have even saved the psd files as rgb and grayscale, hoping the issue was just multixhannel but that did not work.
In CS6, I could import (open) DWG files and it would correctly categorize the input objects into separate layers. In CC, it is putting them into a group in a single layer, which is a big usability regression. Is there a fix for this?
View 18 Replies View RelatedI am having trouble processing point code to correctly string the survey points. I have tried three methods of coding and each method has a draw back which isn't really acceptable to me, as it either means more work in the field or more work in the office.
Method 1: I code my points TOP 1 B, or TOE 2 or NS.
When doing this method the survey points don't string correctly. Because of the space delimitation inbetween TOP & 1 Civil3d only recognises the code TOB and doesn't pay attention to the string number. So all the points with the same code get stringed regardless of the string number. Please see file "TOP_1_B_CODE_STYLE.png" and you will see that TOP 1 E strings to point TOP 2 B.This will create a lot of work in the office breaking all the survey figures so they appear correct.
Method 2:I code my points TOP1 B, or TOE2 or NS. When doing this the points don't get coded correctly. Because the code is TOB when I import a point with the code TOB1 it doesn't recognise the code, and puts the point on the default layer 0. Please see file "TOP1_B_STYLE.png" and you will see all of the TOP1 and TOE1 are white and one layer 0. This will make a lot of office work changing points to the correct layers.
Method 3: I code my points without a string number, and only pickup one line at a time. So I would start picking up a toe of bank by TOE B then finish it on TOE E. See file "TOP_B_TOP_E.png" to see the result.
This does get the result I want but it really makes field work procedures slow. It would be very frustrating doing a detail survey of a road and having to walk each individual breakline.
I want to be able to use Method 1 but to have all points get stringed correctly. I have read a pretty good post about this here where the outcome is that all points should be put on layer 0 by default (I can't find it again though!). For me though that isn't a very good option as I often have both design and asbuilt in the same drawing, and need to be able to turn off groups and not have the associated points left on my screen.
I am trying to import footage shot on a Sony PMW-200 camera into PP 7. I was wondering what files need to be imported into PP 7, i.e. the .mxf files. the .xml files, etc. I am getting footage into the project, but it is not playing in the source window, and I also don't have any audio.
View 6 Replies View RelatedIn an HDV project in CS5 Premirer Pro, I am importing images from a source file into the project window and then onto the timeline. These are separate jpg images, each one with a different filename albeit the first three letters of the filename are the same. When the images are imported, although the filenames are as they appear in the source folder, the actual images are all identical - usually to the first image in the group. It makes no difference whether I import the images separately or as a group - the same problem persists. I have tried clearing the media cache and re-starting the computer. No use.
View 1 Replies View Related i have been having trouble with premiere pro, i am tasked with editing footage for a promotional video for a college. the footage was recorded on two seperate cameras, first was a JVC HM100, second is a Canon 1100D.
now we have most of our footage, and i have looked through it when i was on a mac, but then we i went home to do it at home on my PC running Windows 8.1 and Premiere Pro CC, i tried to import the JVC footage and it says the Codec is missing. but when i import the footage from the Canon, it works fine, so i have to right codec to play mov. but as far as i know, it is todo with the JVC recording with MPEG-2. now converting the footage works, but it is extremely time staking and i think it is reducing the qaulity a bit. i just want to know if there is another way for me to fix the file and import it into Premiere Pro CC. or a different conversion method. i am using handbrake currently as i know the programme and i can change a lot of quality settings. i have a lot of little files to convert, it isnt a case of a few big files, its over 30 little files, so i would like a working queueing feature if i convert file.
i can import MOV files that were filmed on a JVC camera but i can import files that were filmed on Canon camera, and i beleive it is todo with MPEG-2
System stuff:
OS: Windows 8.1 Pro 64-Bit
Premiere Pro CC,
latest, i have some other adobe programs such as AE, PS, and AI, as well as media encoder(which doesnt accept the file either)
System Spec:
CPU: 4670k
MOBO: MSI G45 Z87 Gaming
Ram: G-Skill RipJaw 8Gb (2x4Gb) 1600Mhz
PSU: Corsair CX 600
GPU: GTX 760
Win 7. CC7.1...For specific reasons I created a new Project in Premiere CC7.1 and imported a single sequence from a CC project that had a lot of sequences (11)
This worked absolutely perfectly but I was surprised by 2 things ....that I do not recall happening in CS6 or any prior versions. ( I never did this procedure much though)
#1. The assets came in as if project managed. ie. Only the assets the sequence required. In this case a very small sub set of what was in the original project.That was very cool and made for a neat and compact project. I dont recall that in CS6 so if its a feature...I love it.
#2.The assets did not ingest in the new project in the Bin folders carefully named and organised in the original project.Not so cool in the case where one is using source footage with common file names (eg. AVCHD) and not so cool that it needs managing and sorting again.I think I recall assets imported in original folders in CS6 ...albeit...non project managed ie everything??? Part cool and part not!
Do wonder if #2 can be looked at as a possibility for a fix. It would be brilliant please Adobe.I created a new project and imported the sequence ( which was an edit lockdown) specifically for a Direct Link into Speed Grade.
It was an insurance measure in case of any issues that may have arisen. eg a corruption via the DL. workflow.the DL and SG are working on this brilliantly well.
Will Premiere Pro CC import directly from the Canon G20 or need the files be copied? O/S is Win-7 Pro.
View 3 Replies View RelatedI have a problem regarding MJpeg avi codecs. I have a Fufifilm Finepix Zoom digital camera which has a motion picture capture facility as do most digital cameras now. The Mjpegs Avi movies I record will play fine on Windows Media Player and Quicktime but when I try to import the movies into Adobe's Premiere 6.0 Video Editing Package I get a Error: message stating that the Mjpeg Avi has an unsupported compression format. The files I'm trying to bring into premiere are not large (1Mb/3MB) and I've also tried recompressing the Mjpegs with Advanced AVI Splitter software with no success.
View 2 Replies View RelatedI am trying to import a large wmv file (1hr 6min) into premiere pro cs6 so that I can blur some faces, it is a traffic stop, but the file will not import. I have done this before several times but the largest file was 16 min. Is this file too big to import? Because of legal reasons it cannot be edited in any way except to blur the faces. I was going to divide it into smaller files to import but was told it had to be intact.
View 4 Replies View RelatedI'm new to video editing and I have been using Final Cut Pro X but I have Premier as part of my Creative Cloud Subscription so I want to give it a try.
I have some footage from a Panasonic camera which has imported fine into Final Cut but when I try to import into Premier I don't get any audio.
I'm using the media browser and I've copied the full contents of my card and like I say it does work in Final Cut.
trying to make a DVD which will be of several large (>13GB) video files.
Is there a limit to how big you can import?
My first video file is 17GB and I want to be able to edit it and chop bits out...when I import it, I only seem to have 3mins of audio and a broken video image....
I'm trying to import an HDV clip into Premiere Pro on my iMac running OSX Lion. I have 5 clips from the shoot and 4 are importing fine. The first sign of trouble is that when I see the clip in the media browser the box is initially bright red. Then, when I import it the video is fine, but it doesn't have audio attached. I watched the clip in Quicktime and the audio plays fine. Is there a limit to what size file you can import into Premiere (this one is very slightly bigger thant he others - 12.67 GB)? Or is there any other reason/work around? I'm not very technical so I'm not sure if I can provide much more info than that. T
View 19 Replies View RelatedFor some reason I keep getting crashes when importing HDV (720p60) video into the timeline of Adobe Premiere Pro CS6. This has happened on two different machines, with similar specs.
Per the suggested guidelines, here are the specifics:
Version of Premiere Pro: CS6, Version 6.0.5 (001 (MC:264587))All updates have been installed.
Operating System: Mac OS X 10.8.5.
Source footage: HDV 720p60 video in .MOV container.
Full text of error message: "Sorry, a serious error has occured that requires Adobe Premiere Pro to shut down. We will attempt to save your current project." Link to full crash report: URL....
Crash occurs when trying to import HDV .MOV file.This is a consistent problem when importing .MOV files of this type.
Complete Adobe Creative Suite is installed. Also using Episode Pro encoding software from Telestream to prepare HDV video. No other external video hardware or codecs installed.Yes, I am using the Mecury Playback Engine GPU acceleration.
I'm making a video for work based on a popular UK quiz show. The video is going to be filmed in my office and to give it a degree of authenicty I would like to import an image of the show in the background. I dont have access to any other software other than Premiere Pro and wondered if there's any way this can be done.
View 3 Replies View RelatedWe are working in a shared storage environment with 4 editors runnig Premiere Pro CC. We set up a Master Project with all the raw media, then split it between 2 editors to sync and create rough assemblies. Afterwards, we need to import the assembly sequences into the master project. I select a bin, Import a project file, select "Selected Sequences", Dynamic Link shows that it's connected to the project, then it takes 10+ minutes (I wish this were an exaggeration) to "load" to project so that I can choose the sequence(s) I want to import. This is even more frustrating when I import a sequence and it brings in duplicate Master Clips, forcing me to go back to the project and figure out what has change with the interpretation of the clips. Is there any way to speed this process up? Projects contain 5000 - 10,000 media elements.
View 3 Replies View RelatedI have been editing on Premiere and just recently encountered this problem: the video and audio get out of sync AFTER I have imported my media into the program. I have been importing my media in the following process:
I upload the media from my SD card in my camera onto my computer.I watch the media in QuickTime and it plays perfectly. Nothing is out of sync and everything plays in normal time.I create a new project in Premiere and import the media from my computer into the new project.I go to play the media back and start editing, and find the video and audio are out of sync. The video is playing extremly slowly and the audio is playing perfectly fine. I have played around with the speed and duration of just the video (not the audio) and all it does is create weird skips in the video. I have also tried exporting the media to see if it would somehow render itself out, but nothing seems to work. The problem is not with the camera or the original media.
This is how the video looks when I play it straight from QuickTime after uploading the media onto my computer from the SD card.
A play icon insie a circle appears on the top right (semi-transparent, like a watermark) after I import the video and on the file that's exported. The original file doesn't have this so it must be an Adobe default? Does same thing in Media Encoder.
View 3 Replies View RelatedI've been using Xsplit to record games while I play. I recorded a ~2 hour video and toward the beginning of the video it seems to be pretty a-okay but later in the video when I play it in premier pro, the audio starts falling out of sync.When I play the original raw video the audio and video are both on time.
I read somewhere that the reason why the audio was out of sync was because xsplit uses a "variable framerate".
Not sure if this is true or not, but regardless, I tried exporting numerous times and the audio STILL falls out of whack. I looked on xsplit and there was a setting that i could enable to force constant frame rate..
primere pro will not start... appliction unable to start correctly 0xc000007b
View 1 Replies View RelatedI have a several dozen shots, Quicktime ProRes 422 HQ. When I try to import them into Premiere CS6 all the arrives in the bin is the audio of the clips. The video has been stripped. But if I play the clips outside Premiere - just double click them open and play them with Windows Media Player, they play fine.
I'm not having trouble with any other formats.
Just the ProRes. And I must have the necessary Quicktime ProRes plug-in installed, as the individual clips open and play fine.
Macbook Pro Retina friends, photographers, and video editors.Since I installed OS X Maverick, I have the following issues with Adobe Premiere Pro CS6: Why in did I update my Apple OS before waiting 6 months
- browser window appears for a split second, then disappears when importing new files.
- browser window sometimes shows all items greyed out when trying to import files.
- cannot "Link Media" by example multiple TIFF and one EDL file for subtitles. 1st time menu appears a split second then disappears, then on subsequent tries all is greyed out.
I have a mid 2012 Macbook PRo Retina with SSD @ 50% capacity. All else is extremely fast.All my Adobe Master Collection CS6 is up to date.
I have a project, and the mission is to create an intriguing ad that captures yet still gives off information about the movie..
As for the title, we have to create our own.
So a makebelieve movie? Yea.. I guess..
So I came up with this, I've never done movie ad before, so what are some things i should look out for?
I cannot get text from MoGraph menu in Cinema 4D. Only can get from Spline options. Then I cannot put color, depth nor do anything with these text.
View 1 Replies View RelatedCinema 4d wont open in after effects cc it says "No CINEMA 4D file detected. add the effect to an imported CINEMA 4D file, or create a new CINEMA 4D file in CINEMA 4D
my system specs are:
Processor: Intel(R) Core(TM) i3-2350M CPU @ 2.30 GHz
RAM: 4GB
System: 64-bit Operating system
GPU: Intel(R) HD Graphics 3000
X4. I also got the Canon today and was looking at the rendering modes in X4.
Here is my question. I shoot a video in 24fps cinema mode, import it into VSX4, after I edit it and render it will it alter the frame rate and remove the "Hollywood" movie effect of 24fps?
I am trying to develop a graphic that looks like a lighted cinema sign.
View 1 Replies View Related