I have to get a jpg to this size requirement:
1920 pixels on the largest side
3MB or under
Right now it is at:
w: 1848 pixels
h: 1920 pixels
72 ppi
This makes it 3.5MB. If I lower the h or w the website won't accept. I tried changing ppi to 60 but it barely makes a difference (3.4MB or so).
I have used Gimp a bit, and before that PS quite a bit. I have never had to use the size constraints for sizing a file to fit a large format printer. I will be getting one any day so I would like to be prepared as much as possible. When I was at another shop, the owner used one of the cropping functions to set the finish print size and then she could move the box around to locate the best print area and remainder to be cropped. She was using PS. I would assume I could do it also in Gimp, but have not found a way to do it yet. What am I missing. Even if the printer software will do it on the printer, I would like to be able to show my customer on a PC monitor what they might expect.
View 4 Replies View RelatedThe project is to determine to upper 300 acres and 25 square miles of watersheds to determine a point in a stream to comply with a forestry law. The law is explained in the brochure [URL]......... Page two has a simple map explanation. The points to find are the 300 acres & 25 square miles thresh holds in watersheds.
I am working with Map3D 2014. This could be done with drawing polygons, shp, or sdf. The output would be the points in the streams. A stream is from its origin downstream to its mouth at another stream, wetland, lake, pond or ocean. Watersheds smaller than 300 acres get included into the next stream watershed downstream.
I have a MAC OS X which has 3 users. I have been playing with textures and on one user I am able to move the texture on top a photo and size it to fit. On the other user I am not able to size as the sizing info does not appear. I have tried different shots but nothing changes.
View 2 Replies View RelatedI need to resize the canvas for some custom work. All I can accomplish is to resize the canvas and then do a crop and paste to the correct size. Why is the canvas resize locked into proportional sizing only?
Is there another setting I could change? The added steps of cropping and pasting to get to the right canvas size is a hassle.
Image Sizing Dimensions produces wrong image sizes upon export for certain images.
Example, I have export set up for iPad resolution, 2048x1536px at 264ppi. If I now export an 3264x4928px image it should be resized to 1356x2048px. What I get is 1356x2047 instead, one pixel too short on the long side. This doesn't happen for all images source resolutions and ratios though. I haven't figured out the pattern yet.
I've just reduced the size of a canvas from 300x300 to 200x200 but when I merge the layers I'm left with a dotted line showing the original size.
reduced canvas size.tiff (128.61K)
Number of downloads: 3
I want to create a template whereby I can make a series of images that I can save as jpgs, upload to my blog, and people can print them. When they print, I want them to be one quarter of a sheet of paper (fit four to a page).
I tried creating a new image using the "inches" specification and those inches seem to have no bearing on inches in real life once printed.
So then I figured that a sheet of paper is 8.5 by 11 and I want a resolution of 300 dpi.
So 8.5 times 300: 2,550 pixels. Times that by 0.25 to get a quarter of it: 637.5 (which gets rounded to 638 pixels).
11 times 300: 3,300 pixels. Times that by 0.25= 825 pixels.
So I put in for 638 pixels by 825 pixels and 300 dpi. I created my image. I saved it as a jpg at full resolution. I uploaded it to my site and tested out the printing.
It took up most of a sheet of paper. Not even close to being a quarter of a sheet.
I've been using 2.6 and created a template for multiple business cards on a standard 8.5 by 11 sheet. [URL]
However the later versions ... 2.8 cause distortions when I try to print. ( Canon MG 2120) The standard 8.5 by 11 mysteriously converts to 7.997 by 10.349 inches .... and a weird 318.870 ppi appears. This obviously distorts my template and the 2 by 3.5 inch cards become odd sizes. When I open the template in 2.6, it works perfectly.
What has happened to the later version? i can't reset to inches and even using the 2559 by 3300 pixils with the 1050x600 card sizecan't be printed accurately So I'm now creating in 2.8 and opening in 2.6 to get my sizes correctly.
I love the expanded tools for drawing in the 2.8 ... but this feature is a nuisance ... along of course with the terrible sizing scale for the brushes. SO hard to calibrate the smaller and moe common sizes. Another bad feature.
Have I missed some adjustment somewhere. Using the same printer, same download gives two different prints sizes in 2.6 and 2.8.
I use Photoshop frequently to work on photographs that I print for others. Recently I changed the ink I use from the genuine type to the compatible type of ink cartridges. I now purchase ink cartridges from a company called Dealo at [URL].
The problem is that there is a slight difference between the color balance of printed photos between the genuine and the ones from Dealo. Unless you place the two side by side for comparison you probably wouldn't notice but here is my dilemma. Most of the clients I produce photos for are repeat clients, which means they can do side by side comparisons.
I have a ton of photos (taken with a digital camera) that I would like to get developed properly.
Before I do this there are a number of photos that need straightening up etc. To do this I will be using the crop tool.
The thing is though, as soon as I crop a straightened up image then some bits will be lost from the sides. Early on the guy in my local photo shop was explaining how he uses the crop tool in photoshop elements (I have Photoshop 7.0.1) to get the correct proportions for developing.
I just got PS CS3 in the mail, and saw DVD-ROM drive listed in the system requirements. Before I take the plunge and open the box, is a DVD-ROM drive _really_ required to install the program, or just to view video content?
View 4 Replies View RelatedThis has been installed and working since just after CS6 released, now Photoshop won't launch it gives me this "sign in required" screen the only change to my OSX 10.7.5 system is I ran the recent Adobe updates
i bought CS6 directly from Adobe... i guess i could just click on some suspect mystery SignIn screen..
I have what I assumed would be a pretty simple task, however it has turned into a pain. I'm creating for a series of digital stamps for an application that processes checks. Stamps will say things like, Previously rejected - Do not redeposit. The app based on a status calls a file and it is placed on top of the check file.
Anyway the specs are black and white, 1 bit and tiff. SO, I'm typically an AI user so once I realized AI didn't do 1 bit tiffs I turned to PS...which I don't know that well. When I create a new document and make it bitmap, 1bit and the size I need, I'm VERY limited with what I can do with the text. I'm not really sure what's going on. I click on the screen with the text selection tool and the artboard area turns pick. I can't edit my text once I click off of it and it's basically blinking black and white??? There is no text layer created, I can't create layers, the text is added to the background layer (which is locked and can't be unlocked).
I have the AI and PS CS3.
I'm using Photoshop 7.0 and well, everything worked fine until... I tried typing using a 8 sized font. But it automatically change it to 13.33 poping a window saying ' a value between 13.33 and 172800.00 is required. Closest value inserted' and it happened after I used the 8 sized font on different images, many times before. Plus it only happens on certain images... if I created a new images (regardless it's size) it won't pop the error.
View 1 Replies View RelatedI got a drawing which was drawn normally.. but i need to get the drawing to align in a required co-ordinates.
View 3 Replies View RelatedWe done a photop for brochure & convert to RGB to CMYK, Can i take any color setting in my Photoshop CS5 (I have a MAC)
View 4 Replies View RelatedI use Firefox, and tried in IE, and can't solve this probably basic action.
Postby Ron P. on Sun Mar 13, 2011 2:41 am
vs_options.png
You do not have the required permissions to view the files attached to this post" is what i see on the screen. So i can't open the .png message.
This problem will probably be very simple for a lot of you. Unfortunately, I'm not as adept at Photoshop as I should, or would like to be.
I want to design a postcard for my business, using several photos in a scattered arrangement on the card, with my business name on.
I'm using Elements 5 and have played around with the "create a greeting card" function. It comes close to what I want to do, but it does seem rather basic. As Photoshop always seems have more than one way of doing something, I was wondering if there is more effective way of going about it, buried in Elements somewhere. Or perhaps there is another, (preferably cheap) program that is better at this. One thing I would like to do is to change the background colour on the card and not have to rely on the background templates offered in the special effects palette. Ultimately, I will be getting them professionally printed, so I will need to supply the printer with the art work in the appropriate form.
Seems like I go through this problem time and again with Photoshop + Acrobat CS2 and still have yet to resolve a way of fixing it short of completely wiping my drive and re-installing Windows (XP Pro) The error is "application library failed to load and the product cannot continue"
If there is anyone out there that has figured out a way to fix this issue please fill me in.
This time I went as far as a complete and though removal of all Adobe products from the system and the registry and then completely reinstalled the product.
I have forgone purchasing CS3 because of this issue as I am 99% sure that it has still not been resolved.
Basically Photoshop and Acrobat are useless at this point and I am using an old version of Picture Publisher and Macromedia Fireworks to complete my work. This I assume is good advertising for Adobe :)
See this post in the forum "could not complete your request because of a program error", PDF format, cs2, xp" as this is an ongoing Adobe issue that they have completely blown off!
I am working on
Adobe Photoshop Version: 9.0.2 (9.0.2x296)
Operating System: Windows XP
Version: 5.1 Service Pack 2
System architecture: Intel CPU Family:15, Model:2, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, HyperThreading
Physical processor count: 1
Processor speed: 2798 MHz
Built-in memory: 2559 MB
Free memory: 1812 MB
Memory available to Photoshop: 1758 MB
Memory used by Photoshop: 55 %
Image cache levels: 6
Serial number: XXXXXXXXXXXXXXXXXX (I have a legal copy)
Application folder: C:Program FilesAdobeAdobe Photoshop CS2
Temporary file path: C:DOCUME~1JIMSHE~1LOCALS~1Temp
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 128.0G, 65.5G free
Primary Plug-ins folder: C:Program FilesAdobeAdobe Photoshop CS2Plug-Ins
Additional Plug-ins folder: not set
Installed plug-ins:
ADM 3.10x21
ASDStrm 1.03x2
Accented Edges 9.0
Angled Strokes 9.0
Average 9.0 (9.0x196)
BMP 9.0 (9.0x196)
Bas Relief 9.0.....
Autocad basics: What does "Point or option keyword required." mean?
View 2 Replies View RelatedI am new to Lightroom 4 and are having some problems exporting certain file dimensions. I have taken some pictures for a friend who wants to use them on her website. When importing the photos I converted them to dng. I have exported different file dimensions such as 320x240 and 640x480 without any problems. Now she asks for 950 x 340. I can enter the dimensions and export it, but when I check the dimensions on the exported photos I get e.g. 513x340.
View 4 Replies View RelatedI shot loads of images as jpegs as requested. Now the customers says actually I'll need them in TIFF!! As the shoot went on I exported the images to 34 folders with 56 subfolders containing 751 jpeg images. I now need to supply exactly the same but with TIFFs. Now I still have the raw files in my C: and it would be lovely to simply re-import them and export them as TIFFs but without looking at every single raw file and finding where ever the corrosponing jpeg is I have no way of exporting the new TIFFs to sit alongside their jpeg counterparts, if you see what I mean? Is there anyway I can utilise/batch process the raw files and export them to right folders as TIFFs?
View 12 Replies View RelatedAfter installing Photoshop CS6 I am unable to scan from within photoshop. I went to the Epson website and followed the instructions given but still no scanner shows up in the File > Import command. I am also unable to complete the crop and straighten photos command from the File > Automate menu, I get a dialog box that states "A required operation is unavailable." I have used this feature for many years and it has saved me many hours of scanning, I need this to work.
View 1 Replies View RelatedWhen selecting an object in 2013, entering the command and trying to select the object without moving the mouse will not select the object on the first pick. You must select the object a second time before the object is selected and highlighted.
Steps to reproduce:
1) Hover over desired object
2) Enter command on keyboard (M, E, CO, etc...
3) Do not move the mouse and attempt to select the object
Nothing is selected or highlighted
4) Attempt to select the object a second time
Object is now selected and highlighted
The same thing occurs if you attempt to create a selection window or crossing window immediately after entering a command without moving the mouse and clicking the first point.
This does not occur in vanilla 2012. I do have Raster Design installed with 2013, so not sure if the issue stems from the add-on or not.
I like my command line to be near the left hand corner and not "docked" (meaning taking up the entire bottom of the screen) like this:But each time I plot, and open AutoCAD 2013, It snaps back to the middle like this:
I've tried saving my workspace (I'm very familiar with customizing and how that all works) but it just always snaps to the middle.I really like the floating command line and found that if I have it just to the right of my UCS icon at the bottom left of my screen, it's out of my way, but gives me the lines of info I want.
How to make it stay near the corner and not snap back to the middle?
I have some stairs which I want to be on a certain level however they are not going onto that level. I have made each row of them into a group as they are for a theatre.
View 6 Replies View RelatedSince upgrading to AutoCAD 2012, everytime I open an xref using xopen, then close the xref, when I go back to the parent drawing the screen is totally blank and I have to regen to get it back. This happens almost 100% of the time in this scenerio. Easy to do a regen, but I am in and out of xref's a lot, and it's getting really old.
View 5 Replies View RelatedI want to make a subassembly in SAC 2013 to change the slope after require depth,see attached example.
View 5 Replies View RelatedError Message in Premiere Elements 11 (mac) when loading .MPEG videos: “The selected file cannot be played because your system does not have the required compressor / decompressor (codec) installed.” Question is, how do I determine what codec is needed?
View 1 Replies View RelatedI want to get crisp action stills (baseball, cycling, etc.) by shooting video on a DSLR and pull still images during postproduction in Lightroom 4.
Questions:
Is this possible to get without blurred stills?If so, how may FPS does the DSLR need to be capable of (60 FPS?)Any specific DSLR camera recommendations?
