GIMP :: HTML And IMG Using Image Mapping?
Apr 13, 2013
I started using Image Mapping earlier today to see what it was...I made a signature for a friend of mine. However i have these two boxes in the image that were suppose to be click-able links. I used Image Mapping to do this however, I found out that after you get the source code it's programed to HTML. I was wondering if there was a way to use the HTML code to put into an IMG.
Like. What i mean is. Instead of using an HTML code for a website banner, Is there a way to do the same concept only in IMG format, And to where when you see the image, You can move your mouse over the two boxes and they could be click-able, And direct you to the specific site that It's programmed to take you to?
View 3 Replies
ADVERTISEMENT
Nov 11, 2013
using Gimp to create a website header that includes image mapping. I figured out how (Filters > Web > Image Map). I just can't figure out how to save it in a format that I can then upload to a Bandcamp website.
I can open a graphic in Gimp that I made in Powerpoint. A second window opens with the same graphic and that is where I add the image mapping. So now how do I save it so that when I upload it the tags are there? Or am I supposed to copy all the tags and then paste that code? I can find the place in Bandcamp where the code gets pasted - but I haven't yet figured out how to copy the code.
View 4 Replies
View Related
Jun 4, 2011
I scanned an image of our firm's logo, and opened it in Gimp. It looked excellent in every detail.
Next, I saved the file as a JPEG (of highest quality) and also as a Windows BMP.
Then, using two different HTML editors, I created a page, and inserted the logo. In both cases, the quality of the image was grossly degraded.. In the original, all the edges were crisp and clear, but once in the HTML files, though the images were of their original size, they were quite fuzzy. In fact, some of the smaller text in the logo became rather hard to read.
What would be causing this sort of deterioration, and what might I do to correct this problem?
View 3 Replies
View Related
Mar 26, 2010
It's best to close all images you have open in Gimp.
[*:261ukphj] Click Windows > Dockable Dialogs > Patterns and find the Stone pattern. Right-click the Stone pattern and Open Pattern as Image. Close the Patterns dialog.
About the Stone pattern: You do not have to use a pattern for this. I chose the Stone pattern because it is bundled with GIMP and everyone has it in their patterns. You can use any pattern or any image that isn't a pattern. This tutorial is just to show you how to make the text and you can choose any image or pattern to use as the environment map. Open whatever you want to use before creating a new image for the text.
[*:261ukphj] Open a new image, 500 x 400, and name the Background layer, bump.
Fill the bump layer with white.
[*:261ukphj] Select your Text tool. I used Sans Bold Italic at size 155 for this tutorial. Any font will do - a moderately heavy one works best.
[*:261ukphj] Click the image window and in the Text dialog type GIMP or whatever you want.
[code]......
Note about the Lighting Effects plug-in. If you use it more than one time and try a different pattern in the current GIMP session you will very likely get an Error message. It doesn't understand what you did with the first pattern you used. Click the OK button to get rid of it.
View 19 Replies
View Related
May 25, 2013
I have attached two images of a young girl. One image (the original) is the one with the busy background. The second image is the one that I have cut out. Now with the pattern I have inserted behind her, the image seems quite acceptable, but if it as a plain white background, there is still some areas around the hair strands that contain the bluish background. Also to get to the stage of my image, I had to delete some of the whispy hair strands to make it look acceptable.
My question is, do you think it is possible to cut this out any better. This was done using the Color mapping method, but I have tried a number of other methods, but cannot seem to keep the hair strands visible and still end up with some color contamination around them. Do you think you could try this image and see if it could be done better.
View 8 Replies
View Related
Apr 5, 2013
Want to open a html -file in GIMP . Is this possible!? IF so - how?
View 1 Replies
View Related
Dec 13, 2011
I am having a problem with camera mapping...I get everything setup and looking good, but when I render it, the image looks really washed out. This happens with both scanline and mental ray rendering. I have done this in the past using max 2009 without any issues.
View 3 Replies
View Related
Nov 15, 2013
I just started web tech. course at richmond adult community college, and I would like to know if there is any option to import a gimp file, image with any most popular html editor (possibly free one ) as it can be done with dreamweaver a photoshop doc.
View 5 Replies
View Related
Mar 22, 2012
When I assign an image map or URL to an object in PPX6 then proceed to Export to Web with HTML and slices selected, it does not export the HTML hyperlinks or image maps.
View 9 Replies
View Related
Dec 4, 2013
I would like to map an image to the face of Inventor part document. Which possibilities Inventor API offers here? I checked out the ColorMapping example but the tessellation of the flat surface is not sufficient to get high resolution image mapped on it. My intention is to attach images to several parts faces within the assembly environment and this as fast as possible since the scene needs to update very quickly.
PS: I use C#.NET.
View 1 Replies
View Related
Jan 29, 2014
I have been using Gimp with a drawing board for cartoon pictures. Now, I like to create simple animation from the pictures that I made. Is there any way Gimp can convert pictures (whatever format) into HTML canvas code?
View 1 Replies
View Related
Mar 5, 2012
Here is what I am doing...
1) I have a transparent .png
2) I select the .png as an object
3) I assign this object a url and alt comment using the internet tool bar or the object properties dialog
4) I define the area as polygon
5) I Export For Web
6) Under HTML and Slices I Export image and HTML
7) I Save as... my .png image
8) It produce an html file with my image, but no hyperlinking or image mapping...
<html>
<head>
<title>image</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
<meta http-equiv="Content-Script-Type" content="text/javascript"/>
<meta name="Generator" content="Corel PHOTO-PAINT 15.1"/>
</head>
<body bgcolor="#FFFFFF">
<img border="0" width="500" height="500" src="image.png">
</body>
</html>
I used to draw battleships in CorelDRAW3 when I was a kid.
View 7 Replies
View Related
Sep 24, 2003
I opened the original template PSD image for the home page in Photoshop 7, removed all the layers and slices that filled up the main panel, leaving everything else just as it is. I then switched to ImageReady, saved the HTML index.html file and images Optimized As and then created a site in GoLive 6 and uploaded it as is.
For purposes of comparison, I also created a site in Dreamweaver and checked it in its Preview in Browser and saw the exact same problem: if you switch your resolution to 800 X 600, everything looks perfect. However, at 1024 X 768, the right margin is white instead of being an extension of the page background and the bottom panel does not extend all the way to the right screen margin.
I've been told that I need a containing table with WIDTH=100% to contain the fixed size pixel table in order to resolve this issue.
Please scroll down till you see the image.
I'd appreciate help on resolving this issue.
Is there a way to edit the image size in Photoshop/ImageReady to automatically generate the correct HTML page?
View 9 Replies
View Related
Oct 5, 2002
I have been working with PS for a while now, and can hold my own, but someone asked me the other day if I could slice up an image and put it into html from a .psd file.
View 8 Replies
View Related
Apr 18, 2011
Is it possible to create an image with different points that are linked to URL's with CorelDraw Graphics Suite X5? I create wordpress websites for clients and I have a client that wants a map with "blinking" identifiers for their different locations. Then when you hover over their "blinking" identifiers they want an image of that location to pop up. Any thoughts on how I could handle this?
View 14 Replies
View Related
Mar 9, 2014
I have many inline formulas (imported from Word file via using mathtype) in PDF article made by ID. But when I export the articles as HTML, the images for formulas become much larger than shown in PDF version. How can i keep the exported images to the same size as they are shown the PDF file? I know I can edit the html file to specify image size, but that is the ideal work flow.
View 3 Replies
View Related
Apr 8, 2014
I have many documents I need to convert to HTML. I need the images in the documents to be links. This has worked fine, according to normal procedures if the images are png, jpg, or gifs. However, most of my images are not those formats. So if I have an eps, pdf, and tiff in my document, upon html export, there is no hyperlink. That is, the <a href></a> tags are not in the HTML at all. But if I convert the images to png, jpeg, or gifs, put them in my document, then choose that file format for conversion, the links work fine.
I want to say there is an issue with the link tags upon file conversion. It could be something else, but I am not sure why it works for certain file formats and not others. I figured ID would keep the association with the hyperling after converting an image from say and eps to jpg. Any way to keep hyperlinks for images after exporting to HTML.
(I can obviously add the link tags myself in the HTML, or convert the images myself and put them in the docs, but I have many documents and would like some automated way.)
View 3 Replies
View Related
Nov 20, 2013
I have made a click able image in CS6 but when I save it to my computer as a GIF, I'm not able to click on it. I'm saving the file as an "Image" and not using "HTML and Images" as I can't find a way to place HTML files on my website.
View 3 Replies
View Related
Jun 14, 2012
I'm trying to export an image map from Illustrator CS6. However I can't get it to save the HTML.
I've setup my hotspots etc. However when I do "Save for Web", there is no option to save "Images & HTML". It only gives me the option of "Image Only".
The only way I've been able to get the HTML is to click on "Preview" from the "Save for Web" screen, and then copy and paste the image map code from there.
I've also tested it with slices, and same thing. There just seems to be no way to get it to generate a HTML file.
Is there some other way I'm supposed to get it to create the HTML?
View 2 Replies
View Related
Aug 27, 2013
When I export the image quality is poor. I tried all settings but it does not get better. E.g. I used JPEG, progressive, highest quality. What is the reason for that?
View 15 Replies
View Related
Feb 9, 2012
I would like to change the default filename for the HTML pages produced by Lightroom 3 in the web gallery. Specifically, I would like to remove the string "_large" from the HTML filename, so it corresponds exactly to the image filename.
Specifically, the URL by default is like this: [URL] ....
and I would like it to be like this: [URL] ....
I assume there is some way to make this change using the template editors, but I can't figure it out.
View 2 Replies
View Related
Jan 13, 2014
I would like to save a downloaded webpage (html file) as a jpeg so that I can edit it in photoshop elements. How do I do that?
View 5 Replies
View Related
Jul 4, 2007
I have to build a website named Hollywood Movie Wallpaper . I've already gotten the pages done using adobe photoshop. This means that I know exactly what I want on each page and I've done the whole page by adobe photoshop. However, most website host needs the file to be in html in order for it to appear on the web. Is there any way to change an adobe photoshop image into a html file without changing the layout or anything? Coz it was hard work designing the layout and inserting the content into adobe photoshop image.
View 4 Replies
View Related
May 20, 2004
Im putting up my first web page using PS to create the template, my problem though is how do I link things? I mean I get the template all set up and I have these nice words, but its a image how do I go in and link the words to well...links so that they can be put into the viewing window, which is another topic because I havent figured that one out yet either.
View 6 Replies
View Related
Apr 30, 2013
[URL].......
I'm having difficulty getting the UVW Map to render like it is shown in the view port. See the link for pictures of my setup.
I've tried messing with the material editor and the UVW Map, but no luck.
View 1 Replies
View Related
Aug 18, 2011
So I am making digital color prints at 24x30. the photography work is about color fields and gradients, so I need super high res files. I have set the size to 24000x30000 pix at 1000 dpi..now my problem, when i go to save the gimp file as a jpeg i get this error message "JPEG image plug-in could not save image"
View 3 Replies
View Related
Jul 25, 2012
I am making a video in Nero Vision 10 and need to cut out the screen of a tv so that I can layer the TV over an image/video so it looks as though it is on the screen. I enclose a screenshot of the project. 'Transform-tools-crop' only cuts in straight lines so I wonder which device I should use which can cut out an odd bespoke shape? You can see in the uploaded image from the project how the image currently cannot fill the frame without covering it.
View 7 Replies
View Related
Apr 4, 2012
I have a PNG image with only one layer as a start point. It has a faded map on it.
I have a second PNG image with a hex grid on it. I do colour to Alpha to establish transparency on the hex grid for white filled hexes (others are not filled with white).
Now, I wish to overlay a portion of the first image with the faded map with the non-transparent part of the second image.
So I select by colour (for the hexes not filled with white) on the second image (the overlay) and I then paste to the first image (after creating a transparency layer and selecting it to receive the overlay).
I see the desired overlay section (minus any transparent stuff as expected), however it is centered over the map in the first image, not where I want it to be. It is a floating selection and must be anchored. So I select the anchor icon in the layer dialog and I think I anchor it into the transparency layer on the first image (that's what I'm trying to do anyway).
And then my problem:
I want to move the thing I just pasted in to the right place with respect to the underlying faded map. I attempt to use the move tool, but all I move is the background map (pretty much the opposite of what I want).
Nothing I do seems to let me reselect the pasted-in overlay so that I can move it.
Why I can't ever reposition the pasted in overlay? It should be in the transparency layer I created but even if I select all, I don't seem to be able to move anything other than the background image.
View 2 Replies
View Related
Jul 19, 2013
I'm running Gimp 2.8.4 on Ubuntu 13.04 Linux (64-bit) and I'm trying touse the "Bevel and Emboss" layer effect on an image which I copied fromanother image. Here is what I've done:
1. Loaded image 'A' into Gimp
2. Selected a portion of it
3. Used "/Edit/Copy" to copy the selection
4. Used "/Edit/Paste As/New image" to create a new image from the selection
5. In the new window for the new image, "/FX-Foundry/Layer effects/Bevel and Emboss"
6. When the "Bevel and Emboss" window opens, I accept the defaults and click "Ok"
The filter starts to run and then stops with an error message. Here is the message I get:
------------ START ------------------
Bevel and Emboss Message
Error while executing script-fu-layer-effects-bevel-and-emboss:
Error: ( : 1) Procedure execution of gimp-selection-layer-alpha failed on invalid input arguments: Item 'Pasted Layer copy' (87) cannot be used because it has not been added to an image
----------- END -------------------
View 5 Replies
View Related
Nov 25, 2013
I have been using gimp now for about 2 months and have just upgraded my OS to Mavericks and upgraded Gimp to 2.8.8.
Upon doing this I seem to have lost the ability to copy/cut an image or part thereof from one open image into another... Example:
I have an image window open with a picture a car and I have an image window open with a race track back ground.
I want to copy the car from image 1 into image 2, but for some reason I cannot do this function anymore. When attempting it, once the item is copies to the clipboard and I then swap to the second image, when I paste as a new layer it pastes the clipboard from that image and not the image from the first window...
View 6 Replies
View Related
Dec 2, 2012
How to convert an image into a Japanese Manga Comic style image using Gimp? I want to turn a few pictures into pictures like this picture that is attached.
View 3 Replies
View Related
